HRBM417S PureFlat Bottom Mount Fridge
Before operating this unit, please read this manual thoroughly, and retain for future reference
Safety and warning information
For your safety and correct usage, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to make sure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and be sure that they remain with the appliance if it is moved or sold, so that anyone using it throughout its life, will be properly informed on its usage and safety notices.
For the safety of life and property, keep the precautions of these users’ instructions as the manufacturer is not responsible for damages caused by omission.
Safety for children and others who are vulnerable people
- According to EN standard
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- According to IEC standard
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person being responsible for their safety.
- Keep all packaging away from children as there is a risk of suffocation.
- If you are discarding the appliance, pull the plug out of the socket, cut the connection cable (as close to the appliance as you can), and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it.
- If this appliance, featuring magnetic door seals, is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make the spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.
- WARNING —This appliance is intended to be used in household and similar applications such as
-staff kitchen areas in shops, offices, and other working environments;
-farmhouses and hotels, motels, and other residential type environments;
-bed and breakfast type environments;
-catering and similar non-retail applications.
- WARNING — Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- WARNING — If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- WARNING — Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING — Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING — Do not damage the refrigerant circuit.
- WARNING — Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- WARNING — The refrigerant and insulation blowing gas are flammable.
When disposing of the appliance, do so only at an authorized waste disposal center. Do not expose to flame.
- WARNING — When positioning the appliance, ensure the supply cord is not trapped or damaged.
- WARNING — Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
Replacing the illuminating lamps
- WARNING— The illuminating lamps must not be replaced by the user! If the illuminating lamps is damaged, contact the customer helpline for assistance. This warning is only for refrigerators that contain illuminating lamps.
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.
WARNING — Refrigerators contain refrigerant and gases in the insulation.
Refrigerants and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is no damaged prior to proper disposal.
It is hazardous for anyone other than an Authorized Service Person to service this appliance. In Queensland, the Authorized Service Person Must hold a Gas Work Authorized for hydrocarbon refrigerants to carry out servicing or repairs which involve removal of covers.
WARNING: Risk of fire / flammable materials
The symbol is a warning and indicates the refrigerant and insulation blowing gas are flammable.
If the refrigerant circuit should be damaged:
- Avoid opening flames and sources of ignition.
- Thoroughly ventilate the room in which the appliance is situated.
It is dangerous to alter the specifications or modify this product in any way.
Any damage to the cord may cause a short circuit, fire, and/or electric shock.
- The power cord must not be lengthened.
- Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire.
- Make sure that you can access the main plug of the appliance.
- Do not pull the main cable.
- If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
- You must not operate the appliance without the interior lighting lamp cover.
- The fridge is only applied with a power supply of a single-phase alternating current of 220~240V/50Hz. If fluctuation of voltage in the district of the user is so large that the voltage exceeds the above scope, for safety sake, be sure to apply A.C.’s automatic voltage regulator of more than 350W to the fridge. The fridge must employ a special power socket instead of a common one with other electric appliances. Its plug must match the socket with ground wire.
- Do not store flammable gases or liquids in the appliance, there is a risk of an explosion.
- Do not operate any electrical appliances in the appliance (e.g. electric ice cream makers, mixers, etc.).
- When unplugging always pull the plug from the mains socket, do not pull on the cable.
- Do not place hot items near the plastic components of this appliance.
- Do not place food products directly against the air outlet on the rear wall.
- Store pre-packed frozen food in accordance with the frozen food manufacturer’s instructions.
- The appliances manufacturer’s storage recommendations should strictly adhere to relevant instructions for storage.
- Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.
- Frozen food can cause frost burns if consumed straight from the freezer compartment.
- Do not place the appliance in direct sunlight.
- Keep burning candles, lamps, and other items with naked flames away from the appliance so that do not set the appliance on fire.
- The appliance is intended for keeping foodstuff and/or beverages in normal households as explained in this instruction booklet. You should take care when move it as the appliance is heavy.
- Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
- Never use the base, drawers, doors, etc. to stand on or as supports.
- Frozen food must not be refrozen once it has been thawed out.
- Do not consume ice popsicles or ice cubes straight from the freezer as this can cause freezer burn to the mouth and lips.
- To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or put too much food in the crisper drawers.
Care and cleaning
- Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
- Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic solvents, or abrasive cleansers.
- Do use a plastic scraper instead of sharp objects to remove frost from the appliance.
- For electrical connection carefully, follow the instructions given in this manual. Unpack the appliance and check if there is damage to it.
- Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In this case, retain packing.
- It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back into the compressor.
- Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation.
- Wherever possible, the back of the product should not be too close to a wall to avoid touching or catching warm parts (compressor, condenser) to prevent the risk of a fire, follow the instructions relevant to installation.
- The appliance must not be located close to radiators or cookers.
- Make sure that the mains plug is accessible after the installation of the appliance.
- Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.
- This product must be serviced by an Authorized Service Center, and only genuine spare parts must be used.
1) If the appliance is Frost Free.
2) If the appliance contains a freezer compartment.
Note: Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. (This clause applies only to the EU region.)
Installing your new appliance
Before using the appliance for the first time, you should be informed of the following tips.
Warning! For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator.
The rollers, which are not castors, should be only used for forwarding or backward movement. Moving the refrigerator sideways may damage your floor and the rollers.
Ventilation of appliance
In order to improve the efficiency of the cooling system and save energy, it is necessary to maintain good ventilation around the appliance for the dissipation of heat. For this reason, sufficient clear space should be available around the refrigerator.
Suggest: It is advisable for there to be at least 50mm of space from the back of the appliance to the wall, at least 100mm from its top, at least 50mm from its side to the wall, and clear space in front to allow the doors to open 130°. As shown in the following diagrams.
- This appliance performs well within the climate class from SN to T showed in the table below. It may not work properly if being left at a temperature above or below the indicated range for a long period.
Climate class Ambient temperature SN +10°C to +32°C N +16°C to +32°C ST +16°C to +38°C T +16°C to +43°C
- Stand your appliance in a dry place to avoid high moisture.
- Keep the appliance out of direct sunlight, rain, or frost. Stand the appliance away from heat sources such as stoves, fires or heaters.
Leveling of appliance
- For sufficient leveling and air circulating in the lower rear section of the appliance, the bottom feet may need to be adjusted. You can adjust them manually by hand or by using a suitable spanner.
- To allow the doors to self-close, tilt the top backward by 10-15mm.
Reversing the door
The side at which the door opens can be changed, from the right side (as supplied) to the left side if required.
Warning! When reversing the door, the appliance must not be connected to the Power, Ensure that the plug is removed from the power socket.
Note: If required, you may lay the refrigerator on its back in order to gain access to the base, you should rest it on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator.
To reverse the door, the following steps are generally recommended.
- Stand the refrigerator upright. Open the door to take out all door racks (to avoid damage) and then close the door.
Please slightly squeeze the door rack from two sides toward the center and inside of the door rack, and then move it upward when taking out the upper rack and lower rack.
- Remove the upper hinge cover-right ①from the right-top corner of the cabinet. Remove the temperature sensor from the cabinet and right upper hinge cover, Install it on the upper hinge cover-left (provided in the plastic accessory bag). Unscrew the 3 screws ② which are used for fixing the upper hinge-right (see the picture below) and take down the upper hinge-right ③.
- Remove the upper door from the middle hinge by carefully lifting the door straight up. Then place the upper door on a smooth surface with its panel upward.
- Unscrew screw ③ and takedown part ② and part ①, Install replacement door stopper-left ④ and stop block-left ⑤ (provided in the plastic accessory bag) to the left side with screw ③. Keep part ①and part ② with the appliance for future reference.
- Use the Allen wrench (provided in the plastic accessory bag) to unscrew the screws used to fix the middle hinge-right and remove the middle hinge-right. Then remove the lower door.
- Place the lower door on a smooth surface with its panel upwards. Unscrew screw ③ and takedown part ② and part ①, Install replacement door stopper-left ④ and stop block-left ⑤ (provided in the plastic accessory bag) to the left side with screw ③. Keep part ① and part ② with the appliance for future reference.
- Install screw hole cover-right ① (provided in the plastic accessory bag) to the right-top corner of the cabinet. Remove screw hole cover-left ② from the left-top corner of the cabinet with a thin-blade screwdriver and Put the screw hole cover-left and upper hinge -right into the plastic accessory bag for future reference.
- Change screw hole covers and screw on a middle cover plate from left to right (as shown in the figure below).
- Lie the refrigerator backward, Remove part ④ (right), and Remove 3 self-tapping screws from the lower hinge -right. Unscrew the lower hinge-right axis then install it on the reverse hole site, and tighten into position (change it into lower hinge-left). Remove the lower hinge left to the left-bottom corner of the cabinet, Then fix it with 3 screws, finally install part ④ on the left-bottom corner and right-bottom corner of the cabinet.
- Stand the refrigerator upright and carefully slot the lower door onto the lowering-left pin and hold it in position. Install the middle hinge left (provided in the plastic accessory bag) and ensure the lower door is in place.
- Carefully slot the upper door onto the middle hinge pin and hold it in position. Move the upper door to an appropriate position, adjust the upper hinge-left (provided in the plastic accessory bag) and upper door, then fit the hinge pin into the hinge hole at the top of the upper door to secure it in place. Then fix the upper hinge part with screws (Please carefully hold the upper door by hand when installing)
- Install the temperature sensor part on the upper hinge cover-left (provided in the plastic accessory bag). Assemble the upper hinge cover-left to match the hinge.
Install the door racks to their original position.
Keep the upper hinge cover right with the appliance for future reference.
Description of the appliance
|1 Display panne!||11 Middle freezer drawer|
|2 Cabinet||12 Lower freezer drawer|
|3 Wind channel||13 Adjustable bottom feet|
|4 Glass shelf||14 Fridge door|
|5 Flexible wine rack(optional)||15 Upper rack|
|6 Cnsper cover||16 Small rack|
|7 Fruit & Vegetable Crisper||17 Lower rack|
|8 Twist ice tray||18 Fridge gasket|
|9 Upper Freezer drawer||19 Freezer door|
|10 Storage icebox||20 Freezer gasket|
- Due to unceasing modification of our products, your refrigerator may be slightly different from this instruction manual, but its functions and using methods remain the same.
- To get the best energy efficiency of this product, please place all shelves, drawers, and baskets in their original position as in the illustration above.
Use your appliance according to the following control regulations, your appliance has the corresponding functions and modes as the display panels shown in the pictures below.
When the appliance is powered on for the first time, the backlighting of the icons on the display panel starts working. If no buttons have been pressed and the doors are closed, the backlighting will turn off.
Controlling the temperature
We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 4°C and the freezer to -18°C. If you want to change the temperature, follow the instructions below.
Hold 3 seconds on POWER Control to turn the power on, and press 3 seconds to turn the power off.
Setting Compartment Temperatures Caution! When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperatures inside each compartment may vary from the temperature displayed on the panel, depending on how much food you store and where you place them. Ambient temperature may also affect the actual temperature inside the appliance.
Refrigerator (Fridge) Compartment Temperature
- Press ZONE repeatedly until the Fridge icon appears.
- When Fridge is on, be illuminated, and then press TEMP. repeatedly to cycle through the available temperature settings, from 8°C to 2°C.
NOTE: Each press of the button advances the setting by one degree.
- Release the TEMP. Control when the desired temperature setting appears.
Freezer Compartment Temperature
- Press ZONE repeatedly until the Freezer Choice appears.
- When Freezer is on, be illuminated and then press TEMP.repeatedly to cycle through the available temperature settings, from -14°C to -24°C.
NOTE: Each press of the button advances the setting by one degree.
- Release the TEMP. Control when the desired temperature setting appears.
The Super Cool feature helps to keep food stored in the refrigerator at the set temperature during periods of high usage, large grocery loads, or temporarily warm room temperatures. The Super Cool feature lowers the temperature in the fridge compartment to 2°C to cook food faster.
- Press MODE repeatedly until the Super Cool icon appears.
NOTE: When Super Cool is on, is illuminated and 2°C appears in the temperature display.
- Press MODE or adjust the fridge compartment temperature according to step 1 to turn off Super Cool manually and the fridge temperature will return to the previous temperature setting.
NOTE: Super Cool will automatically turn off after 3 hours, and the fridge will return to the previous temperature setting.
The Super Freeze feature helps to keep the food stored in the freezer at the set temperature during periods of high usage, large grocery loads, or temporarily warm room temperatures.
The Super Freeze feature lowers the temperature in the freezer compartment to -24°C to freeze food faster.
- Press MODE repeatedly until the Super Freeze icon appears.
NOTE: When Super Freeze is on, is illuminated, and -24°C appears in the temperature display.
- Press MODE or adjust the freezer compartment temperature according to step 2 to turn off Super Freeze manually and the freezer temperature will return to the previous temperature setting.
NOTE: Super Freeze will automatically turn off after 52 hours, and the freezer will return to the previous temperature setting.
If leaving the appliance for a long period of time, you can switch the appliance over to holiday mode.
Do not store any food in the fridge compartment during this time.
- Press MODE until the Holiday icon appears. The appliance automatically sets the following temperatures:
• Fridge compartment: 15 °C
• Freezer compartment: -18°C
- Press MODE or TEMP. to turn off Holiday mode and the refrigerator temperature will revert to its previous temperature setting.
Door Open Alarm
If the fridge door is opened for longer than 2 minutes, the control panel will display “dr”, and the buzzer will sound 3 times every minute for 8 minutes.
- To turn off the alarm, close the fridge door completely.
Using your appliance
Your appliance has the accessories as the“Description of the appliance” showed in general, with this part instruction you can have the right way to use them.. We recommend that you read through them carefully before using the appliance
It is suitable for the storage of canned liquid, bottled drinks, and packed food, etc.
Do not place too many heavy things in the racks.
Shelf in Refrigerator chamber
- There are shelves in the refrigerator chamber, and they can be taken out to be cleaned.
- The crisper is suitable for the storage of vegetables and fruit, etc. Firstly Pull the crisper out to level, Secondly, tip-up it then you can take out the crisper. According to the opposite sequence, you can position the crisper rightly.
The freezer chamber is suitable for the storage of foods required to be frozen, such as meat, and ice.
Caution! Never close the freezer door while the drawers, installation bracket, ice tray are extended. It may damage the unit. Ensure that drink bottles are not left in the freezer for a longer time than needed as freezing liquid may cause the bottle to break.
Twistable ice tray
The twistable ice trays produce and store abundant ice cubes.
- Pull out the twistable ice tray from the installation bracket.
- Fill with drinking water below the maximum level mark.
- Place the filled ice tray back into the bracket.
- Await for around 3 hours, twist the knobs clockwise and the ice will drop into the ice box below.
Cleaning and care
For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly (at least every two months.
The appliance must not be connected to the mains during cleaning as there is a danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the main socket.
Wipe the control panel with a clean, soft cloth.
- Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance. This helps ensure an even distribution of moisture to the surface.
- Clean the doors, handles, and cabinet surfaces with a mild detergent, and then wiped dry with a soft cloth.
- Don’t use sharp objects as they are likely to scratch the surface.
- Don’t use thinner, car detergent, Clorox, ethereal oil, abrasive cleansers, or an organic solvent such as Benzene for cleaning.
They may damage the surface of the appliance and may cause a fire.
You should clean the appliance interior regularly. It will be easier to clean when food stocks are low. Wipe the inside of the fridge freezer with a weak solution of bicarbonate of soda, and then rinse with warm water using a wrung-out sponge or cloth. Wipe completely dry before replacing the shelves and baskets. Thoroughly dry all surfaces and removable parts before putting them back into place.
Although this appliance automatically defrosts, a layer of frost may occur on the freezer compartment’s interior walls if the freezer door is opened frequently or kept open too long. If the frost is too thick, choose a time when the freezer is nearly empty and proceed as follows:
- Remove existing food and accessories baskets, unplug the appliance from the mains’ power and leave the doors open. Ventilate the room thoroughly to accelerate the process.
- When defrosting is completed, clean your freezer as described above.
Do not use sharp objects to remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched back on and plugged back into the mains socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning.
Caution! Only after the door seals are completely dry should the appliance be powered on
Replacing the LED light:
The LED light should be replaced by a professional. If the LED light is damaged, contact the customer helpline for assistance. To replace the LED light, the below steps can be followed:
- Unplug your appliance.
- Push the 3 buttons are located at the back of the control display part with a Thin-blade screwdriver, and then pull it downward.
- Hold the control display part with one hand and pull it with the other hand while pressing the connector latch.
- Replace the LED light and snap it correctly in place.
Helpful hints and tips
We recommend that you follow the tips below to save energy.
- Try to avoid keeping the door open for long periods in order to conserve energy. Ensure the appliance is away from any sources of heat (Direct sunlight, electric oven or cooker, etc.)
- Don‘t set the temperature colder than necessary.
- Don’t store warm food or evaporating liquid in the appliance.
- Place the appliance in a well-ventilated, humidity-free, room. Please refer to Installing your new appliance chapter.
- If the diagram shows the correct combination for the drawers, crisper, and shelves, do not adjust the combination as this is designed to be the most energy-efficient configuration.
Hints for fresh food refrigeration
- Do not place hot food directly into the refrigerator or freezer, the internal temperature will increase resulting in the compressor has to work harder and will consume more energy.
- Do cover or wrap the food particularly if it has a strong flavor.
- Place food properly so that air can circulate freely around it.
Hints for refrigeration
- Meat (All Types) Wrap in polythene food: wrap and place on the glass shelf above the vegetable drawer. Always follow food storage times and use by dates suggested by manufacturers.
- Cooked food, cold dishes, etc.: They should be covered and may be placed on any shelf.
- Fruit and vegetables:
They should be stored in the special drawer provided.
- Butter and cheese: Should be wrapped in airtight foil or plastic film wrap.
- Milk bottles: Should have a lid and be stored in the door racks.
Hints for freezing
- When first starting up or after a period out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment.
- Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required.
- Wrap up the food in aluminum foil or polyethylene food wraps which are airtight,
- Do not allow fresh， unfrozen food to touch the food which is already frozen to avoid a temperature rise of the latter.
- Iced products， if consumed immediately after removal from the freezer compartment, will probably cause frost burns to the skin.
- It is recommended to label and date each frozen package in order to keep track of the storage time.
Hints for the storage of frozen food
- Ensure that frozen food has been stored
correctly by the food retailer
- Once defrosted food will deteriorate rapidly and should not be re-frozen. Do not exceed the storage period indicated by the food manufacturer.
Switching off your appliance If the appliance needs to be switched off for an extended period, the following steps should be taken to prevent it to go moldy.
1. Remove all food.
2. Remove the power plug from the main socket.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged open slightly to allow air to circulate.
If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below.
Warning! Don’t try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service engineer, or the shop where you purchased the product.
|Problem||Possible causes & Solutions|
|Appliance is not working correctly||Check whether the power cord is plugged into the power outlet properly.|
|Check whether the “Power” function is on by pressing the “power” button for 1 second.|
|Check the fuse or circuit of your power supply, and replace if necessary.|
|It is normal that the freezer is not operating during the defrost cycle, or for a short time after the appliance is switched on to protect the compressor.|
|Odors from the compartments||The interior may need to be cleaned|
|Some food, containers, or wrapping cause odours.|
|Noise from the appliance||The sounds below are quite normal:
• Compressor running noises.
• Air movement noise from the small fan motor in the freezer compartment or other compartments.
• Gurgling sounds similar to water boiling.
• Popping noise during automatic defrosting.
*Clicking noise before the compressor starts.
|Other unusual noises are due to the reasons below and may need you to check and take action:
• The cabinet is not level.
• The back of the appliance touches the wall.
• Bottles or containers fallen or rolling.
|The motor runs continuously||It is normal to frequently hear the sound of the motor, it will need to run more when in the following circumstances:
• Temperature setting is set colder than necessary
• Large quantity of warm food has recently been stored within the appliance.
*The temperature outside the appliance is too high.
• Doors are kept open too long or too often.
• After your install the appliance or it has been switched off for a long time.
|A layer of frost occurs in the compartment||Check that the air outlets are not blocked by food and ensure food is placed within the appliance to allow sufficient ventilation.
Ensure that door is fully closed. To remove the frost, please refer to the“Cleaning and care” chapter.
|The temperature inside is too warm||You may have left the doors open too long or too frequently, or the doors are kept open by some obstacle; or the appliance is located with insufficient clearance at the sides, back, and top|
|The temperature inside is too cold||Increase the temperature by following the “Display controls” chapter.|
|Doors can’t be closed easily||Check whether the top of the refrigerator is tilted back by 10-15mm to allow the doors to self-close, or if something inside is preventing the doors from closing.|
Disposal of the appliance
It is prohibited to dispose of this appliance as household waste.
Packaging materials with the recycle symbol are recyclable. Dispose of the packaging into a suitable waste collection container to recycle it.
Before disposal of the appliance
- Pull out the mains plug from the mains socket.
- Cut off the power cord and discard it with the mains plug
Warning! Refrigerators contain refrigerant and gases in the insulation. Refrigerants and gases must be disposed of professionally as they may cause eye injuries or ignition.
Ensure that tubing of the refrigerant circuit is not damaged prior to proper disposal.
|Correct Disposal of this product|
|This symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council your household waste disposal service or the shop where you purchased the product.|
To avoid contamination of food, please respect the following instructions
- Opening the door for long periods can cause a significant increase in the temperature in the compartments of the appliance.
- Clean regular surfaces that can come in contact with food and accessible drainage systems.
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream, and making ice cubes.
- One-, two- and three-star compartments are not suitable for the freezing of fresh food.
|1||Fridge||+2—+8||Eggs, cooked food, packaged food, fruits and vegetables, dairy products, cakes, Drinks and other foods which are not suitable for freezing.|
|2||( )`-Freezer||5-18||Seafood(fish, shrimp, shellfish), freshwater aquatic products and meat products(recommended time is 3 months —nutrition values and taste decrease with time), suitable for frozen fresh food.|
|3||“–Freezer||5.-18||Seafood(fish, shrimp, shellfish), freshwater aquatic products and meat products(recommended time is 3 months —nutrition values and taste decrease with time). Not suitable for freezing fresh food.|
|4||“-Freezer||5-12||Seafood(fish, shrimp, shellfish), freshwater aquatic products and meat products(recommended time is 2 months —nutrition values and taste decrease with time). Not suitable for freezing fresh food.|
|5||`-Freezer||<-6||Seafood(fish, shrimp, shellfish), freshwater aquatic products and meat products(recommended time is 1 month —nutrition values and taste decrease with time). Not suitable for freezing fresh food.|
|6||0-star||-6-0||Fresh pork, beef, fish, chicken, some packaged processed foods, etc. (Recommended to eat within the same day, preferably not later than 3 days).|
|7||Chill||-2—+3||Fresh/frozen pork, beef, fish, chicken, freshwater aquatic products, etc.(7 days below 0°C and above 0°C is recommended for consumption within that day, preferably no more than 2 days).seafood(less than 0 for 15 days, it is not recommended to store above 0°C).|
|8||Fresh Food||0~+4||Fresh pork, beef, fish, chicken, cooked food, etc.(Recommended to eat within the same day, preferably no more than 3 days).|
|9||Wine||+5~+20||red wine, white wine, sparkling wine, etc.|
Note: please store different foods according to the compartments or target the storage temperature of your purchased products.
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mold from developing within the appliance.
Water dispenser cleaning (special for water dispenser products):
- Clean water tanks if they have not been used for 48h; flush the water system connected to a water supply if water has not been drawn for 5 days.
WARNING! Food needs to be packed in bags before putting into the refrigerator, and liquids need to be packed in bottles or capped containers to avoid the problem that the product design structure is not easy to clean.
Documents / Resources
|Hisense HRBM417S PureFlat Bottom Mount Fridge [pdf] User Manual|
HRBM417C, HRBM417S PureFlat Bottom Mount Fridge, HRBM417S, PureFlat Bottom Mount Fridge