HILTI MT-TL Twist Lock Channel nut System
Installation Instruction
Product Specifications
- Model: MT-TL M8 / MT-TL M10 / MT-TL M8 OC / MT-TL M10 OC
- Part Number: 2311342-04.2025
- Dimensions:
- MT-TL M8: 25 mm (1 inch)
- MT-TL M10: 35 mm (1 inch)
- MT-TLB: 24 mm
- MT-ML M10: 30 mm
- Torque Specifications:
- MT-TL M8: 30 Nm
- MT-TL M8 OC: 40 Nm (30 ft-lb)
- MT-TL M10: 30 Nm
- MT-TL M10 OC: 40 Nm (30 ft-lb)
- MT-TLB: 15 Nm
- MT-TLB OC: 20 Nm (15 ft-lb)
- MT-TLB 30: 30 Nm (22 ft-lb)
- MT-TLB 30 OC: 40 Nm (30 ft-lb)
- Other Specifications:
- SW: 8.8
- SI-AT-A22, SI-AT-22 compatibility
Product Usage Instructions
Installation
- Identify the appropriate model based on your requirements.
- Ensure the dimensions match the specifications needed for your application.
- Use the specified torque values to securely fasten the product in place.
Maintenance
Regularly check the torque settings to maintain proper functionality. Lubricate moving parts if necessary.
Compatibility
Ensure compatibility with SI-AT-A22 and SI-AT-22 for seamless integration with other components.
Frequently Asked Questions
Q: What are the torque specifications for MT-TL M8 and MT-TL M10?
A: The torque specification for MT-TL M8 is 30 Nm, while for MT-TL M10, it is 30 Nm without OC and 40 Nm with OC.
Q: How do I identify the correct model for my application?
A: Refer to the dimensions provided in the specifications section and choose the model that fits your requirements.
Documents / Resources
 | HILTI MT-TL Twist Lock Channel nut System [pdf] Instructions M8, M10, M8 OC, M10 OC, OC, MT-TL Twist Lock Channel nut System, MT-TL, Twist Lock Channel nut System, Lock Channel nut System, Channel nut System, System |