HIKVISION DS-PK1-E-WE, DS-PK11-E-WEUHK Wireless LED Keypad
FAQ
Q: How often should I replace the batteries?
A: It is recommended to replace the AA batteries with a capacity of 2300 mAh each every two years or when low power is indicated.
Q: Can the device be used for both residential and commercial purposes?
A: Yes, the device is suitable for both residential and commercial use due to its security grade and environmental class certifications.
Q: What is the weight of the device without batteries?
A: The device weighs 151g without batteries.
Diagram Reference
- Appearance
- Enrollment
- Installation
Check signal strength.
User Manual
Scan the QR code for more information and operation help.
Installation
Ensure the device and mounting elements are secured during installation. Protect equipment like mounting plates from damage. Install the device on a non-flammable surface like a concrete wall.
Power Supply
The device operates on two AA batteries with a capacity of 2300 mAh each. Ensure the batteries are inserted correctly with the correct polarity. Replace batteries every two years or when low power is indicated.
Arm/Disarm Functions:
Use the numeric and function keys to arm/disarm different alarm modes such as fire alarm, panic alarm, and medical alarm. Away arm and disarm functions are available for remote operation.
Output Control:
The device features an output control function for managing external devices or systems.
Signal Strength Test:
Perform signal strength tests to ensure reliable communication.
Specification
| Wireless Keypad | ||
|
RF | Speed | 42 Kbps |
| Frequency | 868 MHz | |
| Method | 2GFSK | |
| Distance | 1200 m (open area) | |
| Transmission power | 13 dBm | |
| Interface | Tamper switch | 1, front and rear panel tamper-proof |
| Wireless module | For wireless communication | |
| Power switch | Power on/off | |
| Buzzer | 1 | |
| Display | Indicator | 4: fault (orange), enrollment/signal (red/green), arming(red/green/blue), and alarm (red) |
| Backlight | white | |
| Key | Number key | 10:0 to 9 |
| Function key | 5:*, #, stay arming, away arming, disarming, and output | |
| Operation Environment | Humidity | 10％ to 90％ |
| Temperature | -10 °C to 55 °C (14 °F to 131 °F) -10 °C to 40 °C (14 °F to 104 °F) EN Certified | |
| Appearance | Color | White/Black |
| Dimension (W x H x D) | 140 mm x 86 mm x 22 mm | |
| Installation | Installation | Screw mounting |
|
Power Supply | Power supply | 1.5 VDC, four AA batteries (included, Capacity: 2300 mAh each), standby time more than two years |
| Current | Max. current: 200 mA Quiescent current: 200 μA | |
| Low voltage value | 1.1 V | |
| Voltage Range | Fully charged (new) to 1.1 V (battery) | |
| Weight | Weight without batteries | 151 g, and 23 g each battery |
| Others | PSt type | Type C |
| Classification | Use inside the supervised premises | |
The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. Afer the installation, the equipment, including any associated mounting plate, shall not be damaged.
Install the device on the place with nonflammable surface, such as concrete wall.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
EN 50131-1:2006+A1:2009+A2:2017
EN 50131-3:2009
EN 50131-5-3:2017
Security Grade(SG) 2
Environmental Class(EC) II
Certified by Telefication
Documents / Resources
 | HIKVISION DS-PK1-E-WE, DS-PK11-E-WEUHK Wireless LED Keypad [pdf] User Guide DS-PK1-E-WE, DS-PK11-E-WEUHK, DS-PK1-E-WE DS-PK11-E-WEUHK Wireless LED Keypad, DS-PK1-E-WE DS-PK11-E-WEUHK, Wireless LED Keypad, LED Keypad, Keypad |