HIKMICRO B201-MACRO Macro Lens
Introduction
Macro Lens is mainly applied to the printed circuit board (PCB) detection, electronic component testing, and electronic design verification. It assists the handheld thermography camera to magnify and locate the temperature exception point. There are two types of macro lenses. Please take the actual product for reference.
Note
- It is recommended to use a macro lens with the Handheld Thermography Basic Series or the Handheld Thermography Pocket Series.
- When using the macro lens, you should update the system of the handheld thermography camera to support the macro mode.
Enable Macro Mode
Turn on the handheld thermography camera, and go to Local Settings → Capture Settings to enable Macro Mode. When the macro mode is enabled, parameters such as thermography range can not be configured, and the default temperature range is from -20 °C to 150 °C. The default emissivity is 0.91 when the macro mode is enabled, which is applied to PCB detection. You can also set the emissivity by yourself according to different scenarios.
Note
- Please use the macro lens with a tripod mounting bracket.
- Keep the lens 30 ± 1 mm away from the object.
- When the macro mode is enabled, the display mode of the handheld thermography camera is thermal mode by default and cannot be set.
- Install Tripod Mounting Bracket (Optional)
Note
Please purchase the tripod mounting bracket separately.
Legal Information
2022 Hangzhou Microimage Software Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change without notice, due to firmware updates or other reasons.
Please find the latest version of this Manual at the HIKMICRO website (www.hikmicrotech.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks and other HIKMICRO’s trademarks and logos are the properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.
Product Overview
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOUSHALL NOT USE THIS PRODUCT FOR ILLEGAL HUNTING ANIMALS, INVASION OF PRIVACY OR ANY OTHER PURPOSE WHICH IS ILLEGAL OR DETRIMENTAL TO THE PUBLIC INTEREST.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,
INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICT BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
Regulatory Information
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply, therefore, with the applicable harmonised Europeanstandards listed under the Directive 2014/30/EU(EMCD), Directive 2001/95/EC(GPSD) and Directive 2011/65/EU(RoHS).
Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information, see: www.recyclethis.info
Safety Instructions
These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety regulations.
Transportation
- Keep the lens in its original or similar packaging while transporting it.
- Keep all wrappers after unpacking them for future use. In case of any failure, you need to return the lens to the factory with the original wrapper.
- Transportation without the original wrapper may result in damage to the lens, and the company shall not take any responsibility.
- Do not drop the product or subject it to physical shock. Keep the lens away from magnetic interference.
Maintenance
- If the product does not work properly, please contact your dealer or the nearest service centre. We shall not assume any responsibility for problems caused by unauthorised repair or maintenance.
- If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.
Using Environment
- Make sure the running environment meets the requirements of the lens. The operating temperature shall be -30 °C to 55 °C (-22 °F to131°fF), and relative humidity shall be 5% to 95%.
- DO NOT aim the lens at the sun or any other bright light.
- When any laser equipment is in use, make sure that the lens is not exposed to the laser beam, or it may burn out.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District,
Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various countries or regions, including,gwithout limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local government authorities for any necessary export license requirements if you intend to transfer, export, or re-export the thermal series products between different countries.
Facebook: HIKMICRO Thermography LinkedIn: HIKMICRO
Instagram: hikmicro_thermography YouTube: HIKMICRO Thermography
E-mail: info@hikmicrotech.com Website: https://www.hikmicrotech.com/
UD28869B
Documents / Resources
 | HIKMICRO B201-MACRO Macro Lens [pdf] User Guide B201-MACRO Macro Lens, B201-MACRO, Macro Lens, Lens |