HIhome WAL-FCT27 Smart WiFi 
Lamp User Guide

HIhome WAL-FCT27 Smart WiFi Lamp User Guide

Safety information

warning icon

This product is designed for indoor use. Keep away from moist and damp environment.

warning icon

Read the manual carefully. Hihome (At Home Technologies BV) is not liable and responsible when used incorrectly. Do not connect to devices without a fuse.

Visit https://support.hihome.eu/ for more details manuals and update manuals. For questions you can send an email to
[email protected]

1) Download the Hihome App for iOS of Android

HIhome WAL-FCT27 Smart WiFi Lamp - Download the Hihome App for iOS of Android

App store icon

google play store

Hihome Smart

qr code

https://smartapp.tuya.com/hihomesmart

2) Register and log in

HIhome WAL-FCT27 Smart WiFi Lamp - Register and log in

3) Add device and choose Lighting Devices

HIhome WAL-FCT27 Smart WiFi Lamp - Add device and choose Lighting Devices

4) Mount Smart WiFi lamp in de socket (E27/E14)

Mount Smart WiFi lamp in de socket (E27/E14)

  • When powered on, the bulb starts to blink rapidly
  • When the bulb is not blinking, start the Connection mode
  • Activate the pairing mode by switching off and on the bulb for 3 times
  • After 3 times switching off and on, the bulb starts to blink rapidly
  • The bulb is ready to connect…

5) Connect to your home WiFi (2.4Ghz only)

HIhome WAL-FCT27 Smart WiFi Lamp - Connect to your home WiFi (2.4Ghz only)

6) Operate and setup the bulb using the Hihome App

HIhome WAL-FCT27 Smart WiFi Lamp - Operate and setup the bulb using the Hihome App

Attention!

HIhome WAL-FCT27 Smart WiFi Lamp - Dimmable

The Hihome Smart WiFi bulbs are dimmable via the Hihome App or Google Assistant or Alexa. Do not use a conventional dimmer because it lowers the power and possibly deactivates the WiFi module. The bulb will then not respond until the power is set to the maximum again.

More details, connect with Google Home or Alexa..

For instructions how to connect the Hihome Smart Bulb with Google
Home, please see:
For instructions how to connect the Hihome Smart Bulb with Amazon
Alexa, please see:
For detailed descriptions and manuals:
Go to: https://support.hihome.eu

ce icon

Hereby, At Home Technologies BV, declares that the Hihome Smart WiFi Lamps WALRGBCCT27 and WAL-RGBCCT14 are in compliance with the essential requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available on the productpage on www.hihome.eu.
Further manuals, FAQ and instructions can be found on https://support.hihome.eu

 

At Home Technologies. PO Box 42, 6860AA Oosterbeek, The Netherlands. [email protected]

 

HI Home logo

Documents / Resources

HIhome WAL-FCT27 Smart WiFi Lamp [pdf] User Guide
WAL-FCT27, Smart WiFi Lamp, WAL-FCT27 Smart WiFi Lamp

Leave a comment

Your email address will not be published.