HEXGEARS X5 Wireless Mechanical Keyboard
Product Information
Specifications
- Model: XK2109(X5) 42XK2109006
- Weight: 80g
- Dimensions: 130x105mm
- Keys: 16
- Color: 2C
Frequently Asked Questions
Q: How do I reset the keyboard to factory default settings?
A: Keep pressing the ‘3S’ key combination to restore factory default settings.
Product introduction
The user interface and other illustrations of the product accessories in the manual are all schematic diagrams, which are only for reference. Due to the update and upgrading of the product, the actual product may be slightly different from the schematic diagram. Please refer to the actual product.
Schematic diagram of assembly and disassembly for keyboard hand rest
Assembly instructions of keyboard handrest
- Grasp the middle end of the hand rest and align it with the keyboard lock slot, push it in slightly, and hear a “click”. Indicates that the keyboard has been locked.
- The effect of Complete assembly.
Disassembly instructions of keyboard hand rest
- Grasp the middle of the hand rest and push it forward slightly, and then quickly pull it out after hearing a “click”. Remove the hand rest.
- The effect of complete disassembly.
Installation instructions
2.4G mode
- Turn on the power switch on the back of the keyboard
- Take out the 2.4G wireless receiver
- Plug the receiver into the USB port of the computer
After connecting to the computer, the system automatically detects the 2.4G device and installs it by itself. It can be used after the installation is successful.
Wired mode
- Connect the “TYPE-C” of the data cable to the keyboard.
- Insert the USB connector into the USB port of the computer.
After connecting to the computer, the system will automatically detect the USB device and install it by itself.After successful installation, the user will be prompted to use the current device.
For good 2.4g wireless performance, plug the USB wireless receiver into the USB port on the PC front panel or connect through a USB extension cord to bring the USB wireless receiver closer to the keyboard.
FN combination function keys
Custom lighting mode: Short press FN + END to call up the current custom light, then long press FN + END 3S function indicator and the END key to flash, and enter the custom light effect mode. At this time, press the key that needs to be set to modify the on-off and on-off status of the corresponding LED, and press FN + END to save and exit.
Charging instructions
The USB cable will automatically charge when connected to the computer. The “Fn key” light flashes when charging, and the “Fn key” light follows the current light mode when fully charged. In wireless mode, if the battery is low, the “Fn key” light will flash, please connect to the USB cable for charging.
Basic specifications
- Keyboard type: Dual-mode mechanical keyboard
- Switch: Kailh upgrade BOX Switch ( Hexgears custom-made )
- Switch life: 100 Million Cycles
- Report Rate: 1000HZ ( Wired mode )
- Backlight: Monochromatic
- Function: FN combination function key
- Attended mode: 2.4G / Wired
- Voltage / Current: 3.7V / 300mA
- Keypad: 108 key/Anti-ghosting ( Wired mode )
- Supporting: Windows all/Mac OS/Android
- Battery capacity: 2300mah
- Cable Material: USB Cable braided wire
- Size: 445 x 135 x 37 mm
- Weight: 1150g
The name and content of the hazardous substance in the product
Warning
If any liquid enters the product , please immediately disconnect from the computer and remove the product. Continued use may cause fire or electric shock, please contact the agent for inspection and maintenance.
Check the product shell regularly for any damage, maintenance operations are outside the scope of product compliance requirements.
Disassembly, replacement of parts , modification or modification without express approval will cause the user to lose the right of operating the equipment and the warranty failure.
FCC
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 | HEXGEARS X5 Wireless Mechanical Keyboard [pdf] User Guide XK2109 X5, 2BHVQ-X5, 42XK2109006, X5 Wireless Mechanical Keyboard, X5, Wireless Mechanical Keyboard, Mechanical Keyboard, Keyboard |