2515BONEHDPB Bone Conduction Wireless Headphones 3 12 4 5 1 . // 2 . 3 .Type-C 4 .…
Bone Conduction Headphones
Model No: X4S
Hang the headphone behind your neck with both speakers clinging to your cheekbones.
After that, adjust it until you feel comfortable.
|Power On: |
When the headphone is in a power-off state, press and holds the power button for 3 seconds with blue and red LED flickering once, reminding the tone of” power on”.
|Power Off: |
When the headphone is in a power-on state, press and holds the power button for 3 seconds with red flickering twice, reminding the tone” power off “.
How to connect:
When the headphone is off
How to connect to other devices :
Disconnect the Bluetooth of the currently paired device, the headphone will flash red and blue Fghts alternately with a reminding tone “disconnected”. After that, find the headphone name ” X4S ” on another device’s Bluetooth list and click connect.
Long press for 3s headphone power on.
Incoming call status:
Indicator light Instruction:
When the headphone connects to the phone, the phone will display the battery level of the headphone. If the battery level is displayed in red, it means that it needs to be charged. Just plug in the USB charging cable to the USB charging port to charge.
|BT version Product weight||5.3 25g|
|Charging time||2 hours|
|Music playtime||About 7-8H (at 70% volume)|
|Connect distance||33 Feet|
If there is any injury or property loss due to a violation of the above contents, we will not bear any responsibility.
We provide all our customers a 365—days warranty from the date of purchase. If you have any questions about our product or other needs, please feel free to contact us, we will always be here to assist you.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device to an outlet on a circuit different from that to which the receiver is connected.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
|Headphones X4S Wireless Touch Bone Conduction Headphones [pdf] User Manual|
2A4SF-X, 2A4SFX, X4S Wireless Touch Bone Conduction Headphones, X4S, Wireless Touch Bone Conduction Headphones
8196981 Sandwich Holding Station Sandwich Holding Station Installation & Operation Manual Frymaster, a member of…
Breast Milk Storage Bags (10 pcs.) with Adapter Instruction for use EN The Lola&Lykke Breast…
EK7000 Pro 4K Action Camera with Touch Screen EK7000 PRO ACTION CAMERA USER MANUAL V5.1…
MLB7-1076-RGB ORB+ Smart Portable LED Light