Contents hide
1 ZEBRA Android 14 GMS Rugged Mobile Computer
2 Highlights
3 Version Information
4 Device Support
5 Addendum
6 Component Versions
7 Frequently Asked Questions
8 Documents / Resources
8.1 References

ZEBRA-logo

ZEBRA Android 14 GMS Rugged Mobile Computer

ZEBRA-Android-14-GMS-Rugged-Mobile-Computer-product

Highlights

This Android 14 GMS release 14-20-14.00-UG-U87-STD-ATH-04 covers TC27, TC53, TC58, TC73, TC78, ET60 and ET65 product. Please see device compatibility under Addendum Section for more details.
This release requires a mandatory step OS Update method to upgrade to A14 BSP software from A11. Please refer for more details under “OS Update Installation Requirements and Instructions” section.

Software Packages

Package Name Description
 

AT_FULL_UPDATE_14-20-14.00-UG-U110-STD-ATH-04.zip

  Full package update
AT_DELTA_UPDATE_14-20-14.00-UG-U87-STD_TO_14-20- 14.00-UG-U110-STD.zip  Delta package update from 14-20- 14.00-UG-U87-STD TO 14-20-14.00- UG-U110-STD release

LifeGuard Update 14-20-14.00-UG-U110
Adds Security updates to be compliant with Android Security Bulletin of January 01, 2025.

  • New Features
  •  Resolved Issues
  • Usage Notes

LifeGuard Update 14-20-14.00-UG-U87 

  •  New Features
    • Camera:
      • Added support for camera driver for new 16MP rear camera module on TC53,TC58,TC73,TC78,ET60 & ET65 products.
  • Resolved Issues
    • SPR54815 – Resolved an issue where in DWDemo issue with sending barcode data containing embedded TAB characters.
    • SPR-54744 – Resolved an issue where in sometimes FFD service feature was not working.
    • SPR-54771 / SPR-54518 – Resolved an issue where in sometimes when device battery is critically low device stuck in boot screen.
  • Usage Notes
    • Devices with the new camera module cannot be downgraded – the minimum build requirement is 14- 20-14.00-UG-U87-STD-ATH-04 on A14 or newer.
    • To identify the new camera type user can check ‘ro.boot.device.cam_vcm’ using getprop from the adb. Only new camera devices will have the below property: ro.boot.device.cam_vcm=86021

LifeGuard Update 14-20-14.00-UG-U57 

  • New Features
    • Added a new feature for the device microphone, which controls audio input through connected audio device
    • Added support for WLAN TLS1.3
  • Resolved Issues
    • SPR-54154 – Resolved an issue where in resetting the pending event flag to avoid radio power cycling loop
  • Usage Notes
    • None

LifeGuard Update 14-20-14.00-UG-U45 

  • New Features
  • FOTA:
    • Incremental software release with optimization and improvements for A14 OS support.
  • Zebra Camera App:
    • Added 720p picture resolution.
  • Scanner Framework 43.13.1.0:
    • Integrated latest Oboe Frame work library 1.9.x
  • Wireless Analyser:
    • Stability fixes under Ping, Coverage View, disconnect scenarios while running Roam/Voice.
    • Added a new feature in Scan List to display the Cisco AP Name.

Resolved Issues

  • SPR54043 – Resolved an issue where in scanner changes, Active Index should not be reset if clear submit failed.
  • SPR-53808 – Resolved an issue where in few devices were unable to scan enhanced dot data matrix labels consistently.
  • SPR54264 – Resolved an issue where in snap on trigger not working when DS3678 is connected.
  • SPR-54026 – Resolved an issue where in EMDK Barcode parameters for 2D inverse.
  • SPR 53586 – Resolved an issue where in battery draining was observed on few devices with external keyboard.

Usage Notes

  • None

LifeGuard Update 14-20-14.00-UG-U11

New Features

  • Added a Allows User to select a portion of available device storage to be used as system RAM. This feature can be turned ON/OFF from device admin only. Please refer to https://techdocs.zebra.com/mx/powermgr/ for more details

Scanner Framework 43.0.7.0

  • FS40 (SSI Mode) Scanner Support with DataWedge.
  • Enhanced Scanning performance with SE55/SE58 Scan Engines.
  • Added support for RegEx checking in Free-Form OCR and Picklist + OCR Workflows.

Resolved Issues

  • SPR-54342 – Fixed an issue where Notification Mgr feature support has been added which was not working.
  • SPR-54018 – Fixed an issue where Switch param API is not working as expected when hardware trigger is disabled.
  • SPR-53612 / SPR-53548 – Resolved an issue wherein a random double decode occurred
  • while using the physical scan buttons on TC22/TC27 and HC20/HC50 devices.
  • SPR-53784 – Resolved an issue wherein chrome changes tabs while using L1 and R1
  • keycode

Usage Notes

LifeGuard Update 14-20-14.00-UG-U00 

New Features

  • Added a new feature to read EMMC flash data via EMMC app and adb shell.
  • Wireless Analyzer(WA_A_3_2.1.0.006_U):
    • A full-functional real-time WiFi Analysis and troubleshooting tool to help analyze and resolve WiFi issues from a mobile device standpoint.

 Resolved Issues

  • SPR-53899: Resolved an issue where all application permissions were accessible to the user in System restricted with Reduced Accessibility.

Usage Notes

  • None

LifeGuard Update 14-18-19.00-UG-U01

  •  LifeGuard Update 14-18-19.00-UG-U01 contains security updates only.
  • This LG patch is applicable for 14-18-19.00-UG-U00-STD -ATH-04 BSP version.
  • New Features
    • None
  • Resolved Issues
    • None
  • Usage Notes
    • None

LifeGuard Update 14-18-19.00-UG-U00

New Features

  • The Hotseat home screen “Phone” icon has been replaced by the “Files” icon (For Wi-Fi-only devices).
  • Added support for Camera Stats 1.0.3.
  • Added support for Zebra Camera App Admin control.
  • Added support for DHCP Option 119. (DHCP option 119 would work only on managed devices over WLAN only and WLAN profile should be created by device owner)
  • MXMF:
    • DevAdmin adds the ability to control Android Lock Screen visibility on the remote console if the Lock Screen appears on a device while being remotely controlled.
    • Display Manager adds the ability to select screen resolution on the secondary display when a device is connected to an external monitor through a Zebra Workstation Cradle.
    • UI Manager adds the ability to control whether to display the remote-control icon in the Status Bar when the device is being remotely controlled or viewed.
  • Data Wedge :
    • Support has been added to enable and disable decoders, such as US4State and other Postal decoders, in the Free-Form Image Capture Workflow and other workflows where applicable.
    • New Point & Shoot feature: Allows the simultaneous capture of both barcodes and OCR (defined as a single alphanumeric word or element) by simply pointing at the target with the crosshair in the viewfinder. This feature supports both Camera and Integrated Scan Engines and eliminates the need to end the current session or switch between barcode and OCR functionalities.
  • Scanning:
    • Added support for improved Camera scanning.
    • Updated SE55 firmware with R07 version.
    • Enhancements on Picklist + OCR allow capture of barcode or OCR by centering the desired target with the aiming crosshair/dot (Supports Camera and Integrated Scan Engines).
    •  Enhancements on OCR also includes:
      • Text Structure: ability to capture a Single Line of text and the initial release of a single word.
      •  Report Barcode Data Rules: ability to set rules for which barcodes to capture and report.
      •  Picklist Mode: ability to allow for Barcode or OCR, or limit to OCR only, or Barcode Only.
      • Decoders: ability to capture any of Zebra supported decoders, previously only the default barcodes were supported.
    • Added support for postal codes (via camera or imager) in
      • Free-Form Image Capture (workflow Input) – Barcode Highlighting/Reporting
      • Barcode highlighting (Barcode Input).
        Postal Codes: US Post Net, US Planet, UK Postal, Japanese Postal, Australia Post, US4state FICS, US4state, Mail mark, Canadian postal, Dutch Postal, Finish Postal 4S.
    • Updated version of Decoder library IMGKIT_9.02T01.27_03 is added.
    • New Configurable Focus Parameters offered for devices with SE55 Scan Engine.

Resolved Issues

  • Resolved Enable Touch Feedback.
  • Resolved an issue with camera preview when COPE is enabled.
  • Resolved an issue with decode audio feedback setting to none.
  • Resolved issue with SE55 R07 firmware.
  • Resolved an issue with scanning application getting frozen when switching from Guest mode to Owner mode.
  • Resolved an issue with Picklist + OCR.
  • Resolved an issue camera scanning.
  • Resolved an issue with localization of Barcode highlighting in Data wedge.
  • Resolved an issue with Document Capture template not getting displayed.
  • Resolved an issue with parameters not visible in Device Central app for BT scanners.
  • Resolved an issue with Picklist + OCR using Camera.
  • Resolved an issue with pairing of BT scanner.

Usage Notes

  • None

Version Information

Below Table contains important information on versions

Description Version
Product Build Number 14-20-14.00-UG-U110-STD-ATH-04
Android Version 14
Security Patch level January 01, 2024
Component Versions Please see Component Versions under Addendum section

Device Support

The products supported in this release are TC27, TC53, TC58, TC73, TC78, ET60 and ET65 family of products. Please see device compatibility details under Addendum Section.

OS Update Installation Requirements and Instructions

  • For devices TC53, TC58, TC73 and TC78 to update from A11 to this A14 release, user must follow below steps:
    • Step-1: Device MUST have A11 May 2023 LG BSP Image 11-21-27.00-RG-U00-STD version or a greater A11 BSP version installed which is available on zebra.com portal.
    • Step-2: Upgrade to this release A14 BSP version 14-20-14.00-UG-U00-STD-ATH-04. For more detailed instructions refer A14 6490 OS update instructions
  • For devices TC27, TC53, TC58, TC73, TC78, ET60 and ET65 to update from A13 to this A14 release, user must follow below steps:
    • Step-1: Device can have any A13 BSP version installed which is available on zebra.com portal.
    • Step-2: Upgrade to this release A14 BSP version 14-20-14.00-UG-U00-STD-ATH-04. For more detailed instructions refer A14 6490 OS update instructions .

Known Constraints 

  • Limitation of Battery Stats in COPE mode.
  • System settings access (Access llMgr) – Reduced settings with Accessibility allows users to access application permissions, using Privacy Indicators.

Important Links 

  • Installation and setup instructions – please refer below links.
    • A14 6490 OS update instructions
    • Zebra Techdocs
    • Developer Portal

Addendum

Device Compatibility
This software release has been approved for use on the following devices.

Device Family Part Number Device Specific Manuals and Guides
TC53 TC5301-0T1E1B1000-A6 TC5301-0T1E4B1000-A6 TC5301-0T1E4B1000-IN TC5301-0T1E4B1000-NA TC5301-0T1E4B1000-TR TC5301-0T1E4B1N00-A6 TC5301-0T1E7B1000-A6 TC5301-0T1E7B1000-NA TC5301-0T1K4B1000-A6 TC5301-0T1K4B1000-NA TC5301-0T1K4B1B00-A6 TC5301-0T1K6B1000-A6 TC5301-0T1K6B1000-NA TC5301-0T1K6B1000-TR TC5301-0T1K6E200A-A6 TC5301-0T1K6E200A-NA TC5301-0T1K6E200B-NA TC5301-0T1K6E200C-A6 TC5301-0T1K6E200D-NA TC5301-0T1K6E200E-A6 TC5301-0T1K6E200F-A6 TC5301-0T1K7B1000-A6 TC5301-0T1K7B1000-NA TC5301-0T1K7B1B00-A6 TC5301-0T1K7B1B00-NA TC5301-0T1K7B1N00-NA TC53
TC73 TC7301-0T1J1B1002-NA TC7301-0T1J1B1002-A6 TC7301-0T1J4B1000-A6 TC7301-0T1J4B1000-NA TC7301-0T1J4B1000-TR TC7301-0T1K1B1002-NA TC7301-0T1K1B1002-A6 TC7301-0T1K4B1000-A6 TC7301-0T1K4B1000-NA TC7301-0T1K4B1000-TR TC7301-0T1K4B1B00-NA TC7301-0T1K5E200A-A6 TC7301-0T1K5E200A-NA TC7301-0T1K5E200B-NA TC7301-0T1K5E200C-A6 TC7301-0T1K5E200D-NA TC7301-0T1K5E200E-A6 TC7301-0T1K5E200F-A6 TC7301-0T1K6B1000-FT TC7301-0T1K6B1002-A6 TC7301-0T1K6E200A-A6 TC7301-0T1K6E200A-NA TC7301-0T1K6E200B-NA TC7301-0T1K6E200C-A6 TC7301-0T1K6E200D-NA TC7301-0T1K6E200E-A6 TC7301-0T1K6E200F-A6 TC7301-3T1J4B1000-A6 TC7301-3T1J4B1000-NA TC7301-3T1K4B1000-A6 TC7301-3T1K4B1000-NA TC7301-3T1K5E200A-A6 TC7301-3T1K5E200A-NA TC73A1-3T1J4B1000-NA TC73A1-3T1K4B1000-NA TC73A1-3T1K5E200A-NA TC73B1-3T1J4B1000-A6 TC73B1-3T1K4B1000-A6 TC73B1-3T1K5E200A-A6 TC73
TC58 TC58A1-3T1E4B1010-NA TC58A1-3T1E4B1E10-NA TC58A1-3T1E7B1010-NA TC58A1-3T1K4B1010-NA TC58A1-3T1K6B1010-NA TC58A1-3T1K6E2A1A-NA TC58A1-3T1K6E2A1B-NA TC58A1-3T1K6E2A8D-NA TC58A1-3T1K7B1010-NA TC58B1-3T1E1B1080-A6 TC58B1-3T1E4B1080-A6 TC58B1-3T1E4B1080-IN TC58B1-3T1E4B1080-TR TC58B1-3T1E4B1B80-A6 TC58B1-3T1E4B1N80-A6 TC58B1-3T1E6B1080-A6 TC58B1-3T1E6B1080-BR TC58B1-3T1E6B1W80-A6 TC58B1-3T1K4B1080-A6 TC58B1-3T1K4B1E80-A6 TC58B1-3T1K6B1080-A6 TC58B1-3T1K6B1080-IN TC58B1-3T1K6B1080-TR TC58B1-3T1K6E2A8A-A6 TC58B1-3T1K6E2A8C-A6 TC58B1-3T1K6E2A8E-A6 TC58B1-3T1K6E2A8F-A6 TC58B1-3T1K6E2W8A-A6 TC58B1-3T1K6E2W8A-TR TC58B1-3T1K7B1080-A6 TC58B1-3T1K7B1E80-A6 TC58C1-3T1K6B1080-JP TC58
TC78 TC78A1-3T1J1B1012-NA TC78B1-3T1J1B1082-A6 TC78A1-3T1J4B1A10-FT TC78A1-3T1J4B1A10-NA TC78A1-3T1J6B1A10-NA TC78A1-3T1J6B1E10-NA TC78A1-3T1J6B1W10-NA TC78A1-3T1K1B1012-NA TC78B1-3T1K1B1082-A6 TC78A1-3T1K4B1A10-NA TC78A1-3T1K6B1A10-NA TC78A1-3T1K6B1B10-NA TC78A1-3T1K6B1E10-NA TC78A1-3T1K6B1G10-NA TC78A1-3T1K6B1W10-NA TC78B1-3T1J6B1A80-A6 TC78B1-3T1J6B1A80-TR TC78B1-3T1J6B1E80-A6 TC78B1-3T1J6B1W80-A6 TC78B1-3T1K4B1A80-A6 TC78B1-3T1K4B1A80-IN TC78B1-3T1K4B1A80-TR TC78B1-3T1K6B1A80-A6 TC78B1-3T1K6B1A80-IN TC78B1-3T1K6B1B80-A6 TC78B1-3T1K6B1E80-A6 TC78B1-3T1K6B1G80-A6 TC78B1-3T1K6B1W80-A6 TC78B1-3T1K6E2A8A-A6 TC78B1-3T1K6E2A8C-A6 TC78
TC78A1-3T1K6E2A1A-FT TC78A1-3T1K6E2A1A-NA TC78A1-3T1K6E2A1B-NA TC78A1-3T1K6E2E1A-NA TC78B1-3T1J4B1A80-A6 TC78B1-3T1J4B1A80-IN TC78B1-3T1J4B1A80-TR TC78B1-3T1K6E2A8E-A6 TC78B1-3T1K6E2A8F-A6 TC78B1-3T1K6E2E8A-A6
TC27 WCMTA-T27B6ABC2-FT WCMTA-T27B6ABC2-NA WCMTA-T27B6ABE2-NA WCMTA-T27B6CBC2-NA WCMTA-T27B8ABD8-NA WCMTA-T27B8CBD8-NA WCMTB-T27B6ABC2-A6 WCMTB-T27B6ABC2-BR WCMTB-T27B6ABC2-TR WCMTB-T27B6ABE2-A6 WCMTB-T27B6CBC2-A6 WCMTB-T27B6CBC2-BR WCMTB-T27B8ABC8-A6 WCMTB-T27B8ABD8-A6 WCMTB-T27B8ABE8-A6 WCMTB-T27B8CBC8-BR WCMTB-T27B8CBD8-A6 WCMTD-T27B6ABC2-TR WCMTJ-T27B6ABC2-JP WCMTJ-T27B6ABE2-JP WCMTJ-T27B6CBC2-JP WCMTJ-T27B8ABC8-JP WCMTJ-T27B8ABD8-JP TC27
ET60 ET60AW-0HQAGN00A0-A6 ET60AW-0HQAGN00A0-NA ET60AW-0HQAGN00A0-TR ET60AW-0SQAGN00A0-A6 ET60AW-0SQAGN00A0-NA ET60AW-0SQAGN00A0-TR ET60AW-0SQAGS00A0-A6 ET60AW-0SQAGS00A0- NA

ET60AW-0SQAGS00A0- TR

ET60AW-0SQAGSK0A0- A6

ET60AW-0SQAGSK0A0- NA

ET60AW-0SQAGSK0A0- TR

ET60AW-0SQAGSK0C0- A6

ET60AW-0SQAGSK0C0- NA

 ET60
ET65 ET65AW-ESQAGE00A0-A6 ET65AW-ESQAGE00A0-NA ET65AW-ESQAGE00A0-TR ET65AW-ESQAGS00A0-A6 ET65AW-ESQAGS00A0-NA ET65AW-ESQAGS00A0-TR ET65AW-ESQAGSK0A0- A6

ET65AW-ESQAGSK0A0- NA

ET65AW-ESQAGSK0A0- TR

ET65AW-ESQAGSK0C0- A6

ET65AW-ESQAGSK0C0- NA

 ET65

Component Versions

Component / Description Version
Linux Kernel 5.4.274-qgki
Analytics Mgr 10.0.0.1008
Android SDK Level 34
Audio (Microphone and Speaker) 0.9.0.0
Battery Manager 1.5.4
Bluetooth Pairing Utility 6.2
Zebra Camera App 2.5.8
DataWedge 15.0.14
Files 14-11531109
License Manager and LicenseMgrService 6.1.4 and 6.3.9
MXMF 14.0.0.7
NFC PN7160_AR_11.02.00
OEM info 9.0.1.257
OSX QCT6490.140.14.6.8
Rxlogger 14.0.12.21
Scanning Framework 43.13.1.0
StageNow 13.4.0.0
Zebra Device Manager 14.0.0.7
WLAN FUSION_QA_4_1.2.0.005_U FW.1.1.2.0.1258.1
WWAN Baseband version Z240605A_039.3-00225
Zebra Bluetooth 14.5.0
Zebra Volume Control 3.0.0.106
Zebra Data Service 14.0.0.1032
Wireless Analyzer WA_A_3_2.1.0.021_U

Revision History

Rev Description Date
1.0 Initial release January 1, 2024

ZEBRA TECHNOLOGIES

Frequently Asked Questions

  • Q: How do I check device compatibility for the software update?
    A: Refer to the Addendum Section in the manual for detailed information on device compatibility with the update.
  • Q: What should I do if my device is stuck in a boot screen after the update?
    A: If your device is stuck in a boot screen, follow the troubleshooting steps provided in the manual or contact customer support for assistance.

Documents / Resources

ZEBRA Android 14 GMS Rugged Mobile Computer [pdf] Owner's Manual
Android 14 GMS Rugged Mobile Computer, GMS Rugged Mobile Computer, Rugged Mobile Computer, Mobile Computer

References

Leave a comment

Your email address will not be published. Required fields are marked *