XGIMI Firmware Updating from USB Disk

Necessary Components

• USB disk (FAT32 Format)
  
• PC
  
• Projector (Models support  firmware updates)
  

Update Steps

How to perform a force brush

1.  Download the firmware via the provided link from a PC and copy it to any USB disk; Note: (It should be formatted to FAT32)
   
2. Plug the USB disk into the projector’s USB 2.0 port;
   
3. With the projector in Off mode (please don’t turn on the projector), long-press the “power” button on the projector for 5-7 seconds, and release it when you hear the fan operating strongly.
   
4. You’ll see an Android robot and a progress bar; Then, the system will update automatically.
   

Documents / Resources

XGIMI Firmware Updating from USB Disk [pdf] Installation Guide Firmware Updating from USB Disk, Firmware Updating, USB Disk

References

• User Manual