KA MANA INFRARED ME KA REMOTE

OLELO HOAKAKA
KA MANA INFRARED

ke kikowaena

ʻIkepili ʻikepili:

kükohu

ʻO VT-2425

ia auoiaea

2 auwai a

Ka hopena puka

<6A

ia auoiaea Power

72V / 144W

Lako Voltage

DC: 12V/24V

INTRODUCTION & WARRANTY

Mahalo iā ʻoe no ke koho ʻana a kūʻai ʻana i ka huahana V-TAC. E lawelawe ʻo V-TAC iā ʻoe i ka maikaʻi. E ʻoluʻolu e heluhelu pono i kēia mau ʻōlelo aʻo ma mua o ka hoʻomaka ʻana i ka hoʻokomo ʻana a mālama i kēia manual no ka ʻike e hiki mai ana. Inā he nīnau ʻē aʻe kāu, e ʻoluʻolu e kelepona i kā mākou mea kūʻai aku a i ʻole mea kūʻai aku kūloko āu i kūʻai ai i ka huahana.

They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear.

The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

Aʻo
1. E ʻoluʻolu e hoʻopau i ka mana ma mua o ka hoʻomaka ʻana i ke kau ʻana.
2. Installation must be performed by a certified person.

ikona akahele Kuhi kēia māka ʻana ʻaʻole pono e hoʻolei ʻia kēia huahana me nā ʻōpala ʻohana ʻē aʻe.

pahu pahu Ka akahele, ka makaʻu o ka uila uila.

MANUAL QR code MULTI-LANGUAGE
Please scan the QR code to access the manual in
multiple languages.

KEY FUNCTIONS ARE AS FOLLOWS:

BRIGHTNESS + HANAU – aku ON
COOL COLOR
BRIGHTNESS +
COOL COLOR
HANAU –
WARM COLOR
BRIGHTNESS +
WARM COLOR
HANAU –
THE SHORTCUT KEY OF CCT SELECTION: WHITE COLOR INDICATES THE HIGHER BRIGHTNESS OF COOL COLOR;
YELLOW COLOR INDICATES THE HIGHER BRIGHTNES OF WARM COLOR
KĀNĀWAI
FADE MODE
MAHELE +
KA MĀWAI –

FLASH CHANGING MODE:
First press – Warm color flash; Second press- white color flash; Third press- double color flash;

FADE CHANGING MODE:
First press- Warm color fade; second press- white color fade; Third press-double color fade;

APPLICATION CONNECTION DIAGRAM:
Note: connect the strips first and then the power on; Make sure there is no short circuit before power on.

kiʻikuhi

memo:

  1. Ka lako mana voltagʻO kēia huahana he DC12-24V a ʻaʻole e hoʻopili ʻia i nā voltaghe;
  2. The outgoing line shall be correctly wired according to the color and label provided in the wiring diagram;
  3. This product should not be overloaded.

I KEKAHI O KEKAHI KULA / PALAPALA ME KA HANA, E HELE MAI IA MAKOU MA: [pale ʻia ka leka uila] NO NĀ HANA HANA HOU, NĀ NINAU E HĀ HUʻAIʻI I KA MEA MAKAʻI A I OIʻO PALAPALA kokoke. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

Palapala / Punawai

V-TAC VT-2425 INFRARED CONTROLLER me ka mamao [pdf] Palapala Aʻo
VT-2425, INFRARED CONTROLLER WITH REMOTE, CONTROLLER WITH REMOTE, INFRARED CONTROLLER, REMOTE

E hoʻomaopopo '

Waiho i ka manaʻo hoʻopuka

Ko oukou mail aae? E, aole e paʻiʻia. I kauoha ia mahinaʻai, ua hoailono aku la *