Recon Chat for PS4 Headset

TurtleBeach Recon Chat for PS4 Headset

Alakaʻi Aʻo

KA MOOLELO KAIKAKA

  1. Recon Chat Headband (A)
  2. Recon Chat Earcup with Microphone (B)

KA MOOLELO KAIKAKA

ASSEMBLE THE RECON CHAT

ASSEMBLE THE RECON CHAT

IN-LINE CONTROLS

IN-LINE CONTROLS

  1. Hoʻololi kuapo Mic
    • E hoʻololi i kamute_button_black.png to mute the microphone.
  2. Volume Volume
    • Adjust the master volume of the incoming chat audio.

PS4 HOOLAHA

PS4 HOOLAHA

  1. E hele Settings >> Devices >> Audio Devices.
      • hoʻonoho hoʻokomo o & Nā manaʻo hoʻopuka i Headset Connected to Controller.
      • hoʻonoho Hana ma waho i nā pihi lohe i Chat Audio.
      • hoʻonoho Ka Mana Leo (Headphones) level to Maximum.
  2. E koho i Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone.

XBOX ONE SETUP

'Ōlelo Aʻo: The Recon Chat works with Xbox One Controllers with a 3.5mm headset jack. Other controllers require the Xbox One Headset Audio Controller.

1. Plug the headset into the Xbox controller.

XBOX ONE SETUP

2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the Speaker icon (Audio).

3. Configure your settings as shown:

  • hoʻonoho Poʻo Poʻo i i kā mākou
  • hoʻonoho Mic Monitor i oukou he makemake ko ilikai

Poʻo Poʻo


Hoʻonohonoho Xbox

To set your Recon Chat For PS4 up for use with an Xbox console, please do the following. Please note this information applies to both the Xbox One and Xbox Series X|S consoles.

1. Plug the headset into the Xbox controller.

2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the Speaker icon (Audio).

Xbox mea hoʻoponopono

3. Configure your settings as shown*:

  • hoʻonoho Poʻo Poʻo i i kā mākou
  • hoʻonoho Mic Monitor i he makemake ko ilikai

*The Headset Chat Mixer option will be greyed out; this headset will play chat audio only, so this setting is not needed for this particular headset.

kele

WINDOWS SONIC SURROUND SOUND

1. While in the Home screen, press the Xbox button on the controller. You’ll see the following screen:

WINDOWS SONIC

2. E hoʻokele i ka nofile & System Tab, and select “Kāu Mau koho Paʻamau".

nofile & System

3. E hele General >> Volume & Audio Output

Volume & Audio Output

4. I ka Leo Leo column (right side of the screen), set Headset Format i ʻO Sonic Windows No nā Kelepona Pele.

Leo Leo


Hoʻonohonoho PlayStation

This article details the best way to set your Recon Chat for PS4 headset up for use with a PS4 or PS5 pōkole.

PS4 HOOLAHA

If you have a PS4/PS4 Pro console, please do the following.

PS4 HOOLAHA

  1. E hele Settings >> Devices >> Audio Devices.
      • hoʻonoho hoʻokomo o & Nā manaʻo hoʻopuka i Headset Connected to Controller.
      • hoʻonoho Hana ma waho i nā pihi lohe i Chat Audio.
      • hoʻonoho Ka Mana Leo (Headphones) level to Maximum.
  2. E koho i Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone.
PS5 HOOLAHA

If you instead have a PS5 console, please do the following.

  1. Plug the headset into the aux port in the DualSense controller. Once you do this, the microphone function will automatically switch from the controller’s integrated mic to your headset.
  2. E hele Settings >> Sound >> Audio Output >> Output Device
      • E koho i Headset Connected To Controller no ka mea, Mea hāmeʻa
      • Set Output to Headphones to Chat Audio
  3. E hele Settings >> Sound >> Volume >> Headphones
      • hoʻonoho Volume Control (headphones) pae i i kā mākou
  4. Adjust your microphone levels by going to Settings >> Sound >> Microphone >> Adjust Mic Level >> Microphone Level

Regulatory Compliance Statements for the EAR FORCE Reran Chat Model

Nā leka hoʻomaopopo hoʻokō Komisina Federal Federal Commission (FCC)

Class El Interference Statement

This equipment has been tested and found to comply with the Limits for a Class B digital device, pursuant to Part 15, Subpart B of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference M a residential installation. This equipment generates. uses. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient a i ʻole neʻe hou i ka antenna loaʻa.
  • E hoʻonui i ka hoʻokaʻawale ma waena o nā lakohana a me ka mea loaʻa.
  • E hoʻohui i nā pono i loko o kahi mākeke ma ke kaapuni ʻokoʻa mai kahi e hoʻopili ai ka mea loaʻa.
  • E kūkākūkā i ka mea kūʻai aku a i ʻole he loea lekiō / TV loea no ka kōkua.

Mālama ʻo FCC.

Hoʻopili kēia mea hana i ka Māhele 15 o nā Rula FCC. Aia ka hana ma lalo o nā kūlana ʻelua: 1. ʻAʻole hiki i kēia hāmeʻa ke hoʻopilikia i nā pilikia, a 2. pono i kēia mea hana ke ʻae i nā pilikia i loaʻa, me ka hoʻopili ʻana i hiki ke hana i ka hana makemake ʻole.

Nā ʻIke ICES Kanada

Canadian Department of Communications Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio-noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. NMB-003 du Canada.

European Union and European Fair Trade Association (EFTA) Regulatory Compliance Declaration of Conformity Marking by this symbol:

CE indicates compliance with the Essential Requirements of the EMC Directive of the European Union 12014/30/EU). This equipment meets the following conformance standards:

maluhia: EN 60950-1: 2006 +A11: 2009 + Al: 2010 +Al2: 2011 + A2: 2014 IT-Mark License), IEC 60950-1: 2005 (2nd Ed.) + Am 1: 2009 + Am 2: 2013 (CB Scheme Certificate), EN 50332-1: 2000, EN 50332-2: 2003, EN 71-3: 2013 ALso Licensed for Standards: UL 60950-1: 2007 R10.14, CAN/CSA-C22.2 No.60950-1-07 +41: 2011 + A2: 2014 Additional licenses issued for specific countries available on request

Nā hoʻokuʻu: EN 55022: 2010 + AC: 2011, CISPR 22: 2008

e hoʻonele: EN 55024: 2010, CISPR 24: 2010, EN 61000-4-2: 2009, EN 61000-4-3: 2006 .A2: 2010, EN 61000-4-8: 2010

The products are Licensed, as required, for additional country specific standards for the International Marketplace. Additional issued licenses available upon request.

Māno: Voltage Directive 2014/35/EU, RoHS 2011/65/EU. REACH 2006/1907/EC, WEEE 2012/19/EU. Packaging 94/62/EC. Toys Safety Directive 2009/48/EC

Ka mea pehiueKuhi kēia hōʻailona ma ka huahana a i ʻole kāna mea hōʻaiʻē ʻaʻole pono e hoʻolei ʻia kēia huahana me kāu ʻōpala ʻohana ʻē aʻe. Ma kahi o kou kuleana e hoʻolilo i kāu pono ʻōpala ma ka hāʻawi ʻana iā ia i kahi wahi hōʻiliʻili i koho ʻia no ka hana hou ʻana i nā pono uila a me nā pono uila. ʻO ka hōʻiliʻili ʻokoʻa a me ka hana hou ʻana i kāu pono neoneo i ka manawa o ka hoʻolilo e kōkua i ka mālama ʻana i nā kumuwaiwai kūlohelohe a hōʻoia hoʻi e hana hou ʻia ia i kahi ala e pale ai i ke olakino kanaka a me ke kaiapuni. No ka ʻike hou aku e pili ana i kahi e hiki ai iā ʻoe ke waiho i kāu ʻōpala no ka hana hou ʻana, e ʻoluʻolu e kāhea i kāu luna kūloko, a ma kahi āu i kūʻai ai i kāu huahana.

E ʻoluʻolu e kipa i kēia URL no kahi kope piha o ka Declaration of Conformity:

http://www.turtlebeach.com/homologation  
This product is compliant with the Consumer Product Safety Improvement Act of 2008. Public Law 110-314 (CPSIA)


Download

TurtleBeach Recon Chat for PS4 Headset Instruction Guide – [ Download PDF ]


 

Waiho i ka manaʻo hoʻopuka

Ko oukou mail aae? E, aole e paʻiʻia.