Micron Electronics Prime LS100 LTE Tracker
Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency. Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol.
The WIFI function will be activated and report the MAC addresses once the device is in alerting state. The BLE function will be activated and scan the third-party BLE data or Beacon broadcast by custom setting or protocol.
RF 433MHz is used as a supervised short range RF communication link between the unit and the Base Station to determine if they are no longer in range with each other.
Button /USB Interface Description
|Hoʻihoʻi Hou Kī||Power off the Prime LS100|
|mea hoʻopili||Connected to a Power supply socket can power on Prime LS100|
|Kiu hana||ʻAno SOS|
|Feature Key||Play to do list audios.|
|TEST Key||ʻAno hoʻāʻo|
There are 3 LED lights in Prime LS100 device, the description as following.
|Function Key LED||Function Key pressed||Solid when pressed|
|Feature Key LED||Feature Key pressed||Solid when pressed|
|Test Key LED||Test Key pressed||Solid when pressed|
|Breath Light||Test Key long press||Breath effect|
|Prime LS100 Base Station||The LTE Base Station.|
|Prime LS100 adapter||It used to power on the Prime LS100.|
Pahu i kūkulu ʻia
The following items are suggestion for built-in battery usage, please pay more attention.
- The device is Emergency call equipment, which is designed to be used by adapter always plugged.
- There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged.
Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.
Prime LS100 Adapter
Prime LS100 base station is connected with an AC Adapter.
The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).
Pākuʻi / uila aku
Mana: Plug in the power adapter and power on.
Mana aku: Unplugged the power adapter and press the Reset button.
'Ōlelo Aʻo: the user can not power off Prime LS100 if the adapter is plugged.
'O ka pinepine
Trouble shooting and Safety info
|Messages can’t be reported to the backend server by Mobile network.||APN is wrong. Some APN can not visit the internet directly.||Ask the network operator for the right APN.|
|He hewa ka helu IP a i ʻole ke awa o ke kikowaena hope.||Make sure the IP address for the backend server is an identified address in the internet.|
|Unable to power off Prime LS100.||The function of power key was disabled by AT+GTFKS.||Enable the function of power key by AT+GTFKS.|
|Battery can not be charged||The battery has not been used for too long time and has been locked.||Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help.|
The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime LS100 on the airplane or near medical equipment.
Mālama ʻo FCC.
§ 15.19 Koi lepili.
Hoʻopili kēia hāmeʻa me ka ʻāpana 15 o nā Kānāwai FCC. Aia ke ʻano o ka hana i ke ʻano aʻaʻa ʻole kēia mea e hoʻopilikia i nā pilikia.
§ 15.21 Ka ʻike i ka mea hoʻohana.
ʻO nā hoʻololi a hoʻololi paha i ʻae ʻole ʻia e ka ʻaoʻao nāna i kuleana no ka mālama ʻana hiki ke hōʻole i ka mana o ka mea hoʻohana e hoʻohana i nā lakohana.
§ 15.105 ʻIkepili i ka mea hoʻohana.
Hoʻomaopopo: Ua hoʻāʻo ʻia kēia pono a ʻike ʻia e kūlike me nā palena no kahi hāmeʻa uila B, e like me ka ʻāpana 15 o nā Kānāwai FCC. Hoʻonohonoho ʻia kēia mau palena e hāʻawi i ka pale kūpono e kūʻē i ka hoʻoweliweli ʻino i kahi hoʻonohonoho hale. Hiki i kēia lakohana ke hoʻohana a hiki ke hoʻomālamalama i ka ikehu alapine radio frequency, a, inā ʻaʻole i hoʻokau ʻia a hoʻohana ʻia e like me nā kuhikuhi, hiki ke hoʻopilikia i nā kamaʻilio lekiō. Eia nō naʻe, ʻaʻohe mea e hōʻoia i ka hiki ʻole ʻana o ka hoʻopilikia i kahi hoʻonoho paʻa. Inā hana kēia mea pono i ka hoʻopilikia ʻino i ka lekiō a i ʻole ke kīwī hoʻokipa, i hiki ke hoʻoholo ʻia ma ka hoʻohuli ʻana i nā lakohana a ma luna, paipai ʻia ka mea hoʻohana e hoʻāʻo e hoʻopololei i ke ākea e kekahi a ʻoi paha o kēia mau ana.
-Reorient a i ʻole relocate i ka loaʻa antenna.
-E hoʻonui i ka hoʻokaʻawale ma waena o nā lakohana a me ka mea loaʻa.
-E hoʻohui i nā pono hana i loko o ka mākeke i waho o ke kaapuni ʻokoʻa mai ka mea e hoʻopili ai ka mea loaʻa.
-E kūkākūkā i ka mea kūʻai aku a i ʻole he loea lekiō / kīwī ʻike no ke kōkua.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withmin imum distance 20cm between the radiator & your body.
Palapala / Punawai
|Micron Electronics Prime LS100 LTE Tracker [pdf] Palapala Hoʻohana|
BAS4GA, ZKQ-BAS4GA, ZKQBAS4GA, Prime LS100 LTE Tracker, LS100 LTE Tracker, LTE Tracker, Tracker