PWM-60-KN Pūʻulu 60W Voltage PWM Output KNX LED Keaukaha

Nā kikoʻī

• Hoʻohālike: PWM-60-12, PWM-60-24
• ʻO DC Voltage: 12V, 24V
• Helu ʻia i kēia manawa: 5A, 2.5A
• Mana i helu ʻia: 60W
• Puhi Hoʻomāmā: 0 – 100%
• PWM Frequency (Typ.): 200 – 4000Hz (mea hoʻohana
  hiki ke loli ma o ETS)
• Hoʻonohonoho, ka manawa ala: 500ms, 80ms / 115VAC a i ʻole
  230VAC
• Hoʻopaʻa manawa (Typ.): 16ms / 115VAC a i ʻole
  230VAC
• Voltage laulā: 90 – 305VAC, 127 – 431VDC
• Laulā pinepine: 47 – 63Hz
• Mea Mana Mana (Typ.): PF > 0.97 / 115VAC, PF
  > 0.95 / 230VAC, PF > 0.92 / 277VAC @ haawe piha
• Huina Harmonic Distortion: THD <20%
• Pono (Typ.): 86%
• ʻO kēia manawa (Keʻano.): 0.8A / 115VAC, 0.4A /
  230VAC, 0.32A / 277VAC
• Inrush o kēia manawa (Typ.): Hoʻomaka anu 50A
  (ka laula=350s i ana ma 50% Ipeak) ma 230VAC
• Max. Ka helu o nā PSU ma 16A Circuit Breaker: 9
  'āpana (kaapuni kaapuni o ke 'ano B) / 16 'āpana (kaapuni breaker o
  ʻano C) ma 230VAC

Nā ʻōlelo hoʻohana huahana

Hoʻokomo

1. E hōʻoia i ke kumu mana e hālāwai me ka voltage a me ka pinepine
   nā koi i kuhikuhi ʻia ma ka manual.
2. Hoʻohui i ka mea hoʻokele LED i ke kumu mana ma hope o ka uwea
   kiʻi i hāʻawi ʻia.
3. E kau i ka mea hoʻokele LED ma kahi wahi i hoʻoluʻu maikaʻi ʻia
   ka lā a me ka wai.

Hoʻonohonoho Dimming

No ka hoʻoponopono ʻana i ka laulā dimming, e hahai i kēia mau ʻanuʻu:

1. E kiʻi i nā hoʻonohonoho dimming ma o ka interface ETS.
2. E koho i ka pākēneka dimming i makemake ʻiatage i loko o ka laulā o 0 i
   100%.
3. E hōʻoia i ka hana dimming ma ka hoʻāʻo ʻana i ka LED pili
   hoʻoponopono.

Hoʻoponopono pilikia

Inā loaʻa iā ʻoe kekahi pilikia me ka mea hoʻokele LED, e nānā i ka
ʻāpana hoʻoponopono pilikia o ka manual a i ʻole e kelepona i ke kākoʻo o ka mea kūʻai aku
no ke kokua ana.

FAQ

Nīnau: Hiki iaʻu ke hoʻohana i kēia mea hoʻokele LED me nā kukui LED dimmable?

A: ʻAe, kākoʻo ka mea hoʻokele LED moʻo PWM-60-KN i ka LED dimmable
nā mea paʻa i loko o ka laulā dimming i kuhikuhi ʻia.

Nīnau: Pehea e hiki ai iaʻu ke hoʻololi i ka pinepine PWM?

A: Hiki ke hoʻololi ʻia ke alapine PWM ma o ka interface ETS e like me
e like me nā ʻōlelo kuhikuhi a ka mea hoʻohana i hāʻawi ʻia.

Q: He aha ka helu kiʻekiʻe o nā alakaʻi alakaʻi LED hiki ke loaʻa
pili i ka 16A kaapuni kaapuni?

A: ʻO ka helu kiʻekiʻe o nā mea hoʻokele LED e pili ana i ke ʻano o
hoʻohana ʻia ke kaʻapuni. E ʻoluʻolu e nānā i ka manual no ka kikoʻī
kikoʻī.

PWM – 6 0 – KN 60W Voltage PWM Output KNX LED Keaukaha

moʻo

Palapala Hoʻohana

– ()

File Inoa:PWM-60-KN-SPEC 2024-03-12

60W PWM Output KNX LED Keaukaha

PWM-60-KN moʻo

OLELO HOOLAHA

HOIKE

PWM-60-12

PWM-60-24

DC VOLTAGE

12V

24V

UKU ANA

5A

2.5A

MANA LOA

60W

60W

PALAPALA PALAPALA

0 ~ 100%

PWM FREQUENCY (Typ.) 200~4000Hz hiki ke hoʻololi ʻia ma o ETS

HOʻOMAʻI, RISE TIME Note.2 500ms, 80ms/ 115AC a i ʻole 230VAC

HOLD UP MANAWA (Typ.)

16ms / 115VAC a i ʻole 230VAC

VOLTAGE RANGE Nānā.3

90 ~ 305VAC 127 ~ 431VDC (E ʻoluʻolu e nānā i ka ʻāpana "STATIC CHARACTERISTIC")

KA PALAPALA

47 ~ 63Hz

POWER FACTOR (ʻAno.)

PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ haawe piha (E nānā i ka mahele “POWER FACTOR (PF) CHARACTERISTIC”)

KA PALAPALA HARMONIC

THD< 20%(@load60%/115VAC, 230VAC; @load75%/277VAC) (E ʻoluʻolu e nānā i ka ʻāpana “TOTAL HARMONIC DISTORTION”)

INPUT

EFFICIENCY (Typ.) AC Current (Typ.) INRUSH Current (Typ.)

86%

89%

0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC COLD START 50A(twidth=350s ana ma 50% Ipeak) ma 230VAC; No NEMA 410

MAX. ʻAʻOLE. o PSU ma 16A CIRCUIT BREAKER

9 mau ʻāpana (ka hoʻokaʻawale kaapuni o ke ʻano B) / 16 mau ʻāpana (ka mea hoʻokaʻawale kaʻa o ke ʻano C) ma 230VAC

LEAKAGE KĀWAI

<0.25mA / 277VAC

<0.5W

OIHANA

108 ~ 130% helu mana mana Hiccup mode, ho'ōla hou ma hope o ka wehe ʻia ʻana o ke kūlana hewa

KAAPUNI POKOLE

E pani i ka o/p voltage, mana hou e ola

PALAPALA MAI VOLTAGE

15 ~ 17V E pani i o/p voltage, mana hou e ola

28 ~ 34V

OVER TEMPERATURE E pani o/p voltage, mana hou e ola

HANA ANA.

Tcase=-35 ~ +85 (E ʻoluʻolu e nānā i ka ʻāpana "OUTPUT LOAD vs TEMPERATURE")

MAX. KAHIKI TEMP.

Ka hihia=+85

HUMIDITY HANA

20 ~ 95% RH non-condensing

KE ANA O KA WAIWAI, KA HUMIDITY -35 ~ +80, 10 ~ 95% RH

TEMP. HOOLAHA

± 0.03% / (0 ~ 50)

HANAU

10 ~ 500Hz, 5G 12min./1cycle, manawa no 72min. kēlā me kēia me nā koʻi X, Y, Z

PALAPALA PALAPALA

Kaha.5

ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 EAC TP TC 004 i ʻae ʻia

kūʻokoʻa, GB19510.14, GB19510.1,

KNX NUI

ʻO ka protocol i hōʻoia ʻia

KUE VOLTAGE

PALAPALA & EMC

HOOLAHA KUE

EMC EMISSION Note.6

I/PO/P:3.75KVAC
I/PO/P:100M Ohms / 500VDC / 25/ 70% RH
Hoʻokō i ka BS EN/EN55015, BS EN/EN61000-3-2 Papa C (@load60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020

EMC IMMUNITY MTBF

Hoʻokō i ka BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, pae ʻoihana māmā (ka hoʻonui ʻana i ka palekana Line-Line 2KV), EAC TP TC 020
2135.2K mau min. Telcordia SR-332 (Bellcore); 247.7K mau min. MIL-HDBK-217F (25)

NANA EA

150*53*35mm (L*W*H)

PAKIKI

0.45Kg;30 ʻāpana/16.0Kg/1.0CUFT

HOOLAHA

1. ʻO nā ʻāpana āpau ʻAʻole i ʻōlelo kūikawā ʻia ua ana ʻia ma ka hoʻokomo 230VAC, helu ʻia i kēia manawa a me 25 o ka mahana ambient. 2. Pono paha e hoʻemi i ka helu helu haʻahaʻa voltages. E ʻoluʻolu e nānā i nā ʻāpana "STATIC CHARACTERISTIC" no nā kikoʻī. 3. Ana ʻia ka lōʻihi o ka manawa hoʻonohonoho i ka hoʻomaka anu. Hiki ke ho'onui i ka manawa ho'onohonoho ke ho'ohuli i ka mea ho'okele. 4. Manaʻo ʻia ka mea hoʻokele ma ke ʻano he ʻāpana e hana pū ʻia me nā mea hana hope. No ka mea e pili ana ka hana EMC
ma ka hoʻokomo piha ʻana, pono e hoʻopaʻa hou nā mea hana hana hope i ka EMC Directive i ka hoʻokomo piha ʻana. (e like me ka loaʻa ma https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Hoʻokō kēia moʻo i ka manaʻolana ola maʻamau o >50,000 mau hola o ka hana inā ʻo Tcase, ʻoi aku ka helu tc (a i ʻole TMP, no DLC. ), ma kahi o 75 a emi mai paha. 6. E ʻoluʻolu e nānā i ka ʻōlelo hoʻohiki ma MEAN WELL's webpaena ma http://www.meanwell.com 7. ʻO ka emi ʻana o ka mahana ambient o 3.5/1000m me nā kumu hoʻohālike ʻole a me 5/1000m me nā kumu hoʻohālike no ka hana kiʻekiʻe ma mua o 2000m(6500ft). 8. No kekahi palapala noi a me ka IP wai hōʻoia hana hoʻonoho akahele, e nānā i kā mākou mea hoʻohana manual ma mua o ka hoʻohana. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
No ka hōʻike kikoʻī, e ʻoluʻolu e nānā iā https://www.meanwell.com/serviceDisclaimer.aspx

File Inoa:PWM-60-KN-SPEC 2024-03-12

60W PWM Output KNX LED Keaukaha
HANA ʻIMPAIMA

PWM-60-KN moʻo

AC/L(Brown) AC/N(Puliuli)

PWM-60-KN

ʻO ke kumu dimming no ka PWM style output Loaʻa ka Dimming ma ka hoʻololi ʻana i ke kaʻina hana o ka puka puka.
Ka puka ʻana i kēia manawa DC ON

Io=0A

OFF TON
T

TON Po'ai hana (%) =

×100%

T

Hoʻopuka PWM alapine a hiki i 4KHz

Vo+(ʻulaʻula) Vo-(ʻeleʻele) KNX+(ʻulaʻula) KNX-(ʻeleʻele)

KNXInterface E hoʻohana i ka hōʻailona KNX ma waena o KNX+ a me KNX-. Hiki ke hoʻoiho ʻia ka polokalamu noi (database) ma o Online Catalogs mai ETS a i ʻole ma http://www.meanwell.com/productCatalog.aspx

File Inoa:PWM-60-KN-SPEC 2024-03-12

60W PWM Output KNX LED Keaukaha
HAAWINA OUTPUT vs TEMPERATURE

PWM-60-KN moʻo

LOAD (%)

THD LOAD (%)

100
80 230VAC Komo wale
60 50 40
20

-35 -25 -10

0

15

30

50

60

KA MAHELE ABIENT, Ta ()

70 (PALAPALA)

LOAD (%)

100
80 230VAC Komo wale
60
40
20

-35 -25 0

20

45

60

70

80

85 (PALAPALA)

Kakahi ()

KE ANA HELU

100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
Hoʻokomo VOLTAGE (V) 60Hz Pono e hoʻemi i ka helu ma lalo o ka vol komo haʻahaʻatage.

KA HOʻOLOHE HARMONIC (THD)

24V Model, Tcase ma 75
25

20

15

10

5

0

50%

60%

70%

80%

90%

HAAWINA

115VAC 230VAC 277VAC
100%

EFFICIENCY(%)

PF

KA MEA MANA (PF) ANO

Ma kahi o 75
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
HAAWINA

115V 230V 277V

EFFICIENCY vs LOAD

Loaʻa i ka PWM-60-KN ka hana ʻoi aku ka maikaʻi o ka hana a hiki i ka 89% hiki ke loaʻa i nā noi kahua. 24V Model, Tcase ma 75

95

90

85

80

75

115V

70

230V

65

277V

60

55

50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

HAAWINA

File Inoa:PWM-60-KN-SPEC 2024-03-12

60W PWM Output KNX LED Keaukaha
KE OLA

PWM-60-KN moʻo

OLA(Kh)

120

100

80

60

40

20

0

25

35

45

55

65

75

85

Tcase( )

File Inoa:PWM-60-KN-SPEC 2024-03-12

60W PWM Output KNX LED Keaukaha

PWM-60-KN moʻo

Papa Kuhikuhi

KANAKA EMI

I / P

&

NA PALAPALA

PFC fosc: 50~120KHz PWM fosc: 60~130KHz

KAAPUNI PFC

KAUU PILI

OTP

OLP

PWM & PFC MANA

RECTIFIERS &
KULA

OLP

Kaapuni DIMMING

KAAPUNI HOIKE

OVP

Vo+ VoKNX+ KNX-

'Ōlelo Aʻo: ʻAʻole pili ka PWM fosc ma aneʻi i ka ouput PWM dimming

Hōʻike Mechanical

Ka helu hihia PWM-60KN Unit:mm

AC/L(Brown) AC/N(Puliuli)

300±20

150 KNX pihi papahana & LED 5

SJTW 18AWG×2C

4.5

tc 35

5
tc : Max. Ka Mahana hihia

Hoʻokomo ʻia ka mea hoʻohui KNX i ka pahu

300±10 Ul2464 18AWG×2C(Vo+,Vo-)
Ul2464 20AWG×2C(KNX+,KNX-) 350±10

Vo+(ʻulaʻula) Vo-(ʻeleʻele) KNX+(ʻulaʻula) KNX-(ʻeleʻele)

5 53
13 5
35

Mekanika view o ma ke noi
AC/L(Brown) AC/N(Puliuli)

Vo+(ʻulaʻula) Vo-(ʻeleʻele) KNX+(ʻulaʻula) KNX-(ʻeleʻele)
File Inoa:PWM-60-KN-SPEC 2024-03-12

60W PWM Output KNX LED Keaukaha
Paipai i ke kuhikuhi piʻi mauna

PWM-60-KN moʻo

Hoʻohui manual no ka KNX-type

AC/L(BROWN) AC/N(BLUE)

Vo+(ʻulaʻula)

+

–
Vo-(ʻeleʻele)

KNX+(ʻulaʻula)

ʻĀpana LED a i ʻole vol mautage kukui LED

KNX-(BLACK) PWM KN moʻo hiki ke ETS adressing/programming ME KA hoʻopili ʻana i nā kumu AC.

KNX Bus

E ʻoluʻolu ma mua o ka hoʻomaka ʻana i kahi hoʻonohonoho a mālama ʻana paha, e ʻoluʻolu e kāpae i ka lako mana mai ka pono. E hōʻoia
ʻaʻole hiki ke hoʻopili hou ʻia me ka ʻike ʻole! E mālama pono i ka ea a puni ka ʻāpana a mai hoʻopaʻa i kekahi mea ma luna. Pono nō hoʻi e mālama ʻia kahi hoʻomaʻemaʻe 10-15 cm
he kumu wela ka mea pili. Hiki ke hoʻonui ʻia ka hoʻonui ʻana i ka hoʻonohonoho ʻana ma mua o ka hoʻonohonoho maʻamau a i ʻole ka hana ʻana ma lalo o ka wela ambient kiʻekiʻe
ka wela o loko a e koi ana i ka de-rating i ka puka puka. ʻOi aku ka nui a i ʻole like paha ka helu o kēia manawa o ke kaula kumu mua / lua i ʻāpono ʻia me ko ka ʻāpana. E ʻoluʻolu e kuhikuhi
i kona kikoo. Tc max. ʻike ʻia ma ka lepili huahana. E ʻoluʻolu, ʻaʻole e ʻoi aku ka mahana o ke kiko Tc ma mua o ka palena. MAI hoʻohui i ka "KNX- i Vo-". Manaʻo ʻia ka mana mana he ʻāpana e hoʻohana pū ʻia me nā mea hana hope. Mai ka EMC
e hoʻopilikia ʻia ka hana e ka hoʻokomo piha ʻana, pono e hoʻopaʻa hou nā mea hana hana hope i ka EMC Directive i ka hoʻokomo piha ʻana.

File Inoa:PWM-60-KN-SPEC 2024-03-12

Palapala / Punawai

MEAN WELL PWM-60-KN Series 60W Voltage PWM Output KNX LED Keaukaha [pdf] Palapala a ka mea nona PWM-60-KN Hui, PWM-60-KN Hui 60W Mau Voltage PWM Output KNX LED Keaukaha, 60W mau Voltage PWM Output KNX LED Keaukaha, Voltage PWM Output KNX LED Driver, PWM Output KNX LED Driver, KNX LED Driver, LED Driver, Keaukaha

Nā kuhikuhi

• Palapala Hoʻohana