K300005 Wireless Bluetooth Earbuds

Specifications

Product Diagram

The product diagram illustrates the K300005 wireless earbuds and their charging case. It shows two white, in-ear style earbuds, each featuring a stem. The charging case is depicted as a closed, white, oval-shaped container. A callout indicates to "Press the area" on the earbuds, suggesting touch-sensitive controls.

A more detailed diagram shows the left (L) and right (R) earbuds, highlighting their ergonomic shape and the charging contacts. The charging case is also shown with its lid open, revealing the slots for the earbuds.

Operation Instructions

1. Bluetooth version: YX12
2. Initial Setup: After opening the package, remove the earbuds from the charging compartment.
3. Pairing and Connection: Open the charging case cover. The left and right earbuds will automatically turn on and pair with each other. The Bluetooth name "YX12" will appear in your mobile phone's Bluetooth search area. Tap the Bluetooth name to complete the connection.
4. Power On: Open the charging case cover; the earbuds will automatically power on and connect to previously paired devices.
5. Shutdown: Place the earbuds back into the charging compartment and close the lid. They will automatically shut down and begin charging.
6. Left Earphone Control: Long press the left earphone to increase volume.
7. Right Earphone Control: Long press the right earphone to decrease volume.
8. Voice Assistant: Double-tap either the left or right earphone to activate Siri or your device's default voice assistant.
9. Next Song: Triple-tap the right earphone to skip to the next song.
10. Last Song: Triple-tap the left earphone to go to the previous song.
11. Pause/Play: Single-tap either the left or right earphone to pause or resume playback.
12. Answer/Hang Up Call: Single-tap either the left or right earphone to answer or hang up an incoming call.

Charging Box Indicator Light

1. When the charging case cover is opened, the green light is on. Place the earbuds into the charging case; the green light remains on to indicate the earbuds are charging.
2. The red indicator light blinks while the earbuds are charging and becomes steady once fully charged.

Important: Please use a 5V/1A charging cable or the provided charging cable for charging.

Warning

1. Please ensure the earbuds are placed in the correct position for charging.
2. The battery (or battery pack) should not be exposed to conditions such as direct sunlight, fire, or similar overheating situations.
3. Listening to music at a high volume for extended periods can cause hearing damage. Adjust the volume appropriately when using this device.
4. Do not use the device during thunderstorms, as this may cause abnormal operation and increase the risk of electric shock.
5. Do not dismantle or modify the earbuds for any reason. Doing so may cause malfunction or damage, which will not be covered under warranty.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.