Brennenstuhl WA 3000 XS01 WiFi Smart Socket

Safety Instructions

WARNING! RISK OF DEATH AND ACCIDENTS FOR INFANTS AND CHILDREN! Never leave children unattended with packaging material. Danger of suffocation from ingestion or inhalation of small parts or films. Children often underestimate dangers. Keep children away from the device; it is not a toy. This device can be used by children from 8 years and older, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if supervised or instructed on safe use and understanding the risks. Children must not play with the device. Cleaning and user maintenance must not be carried out by children without supervision.

Operate the device only in a dry and dust-free environment, and indoors only. Do not expose the device to unfavourable influences such as humidity, constant sunlight, heat radiation, cold, or vibrations.

CAUTION! RISK OF INJURY! Brennenstuhl is not liable for material damage or personal injury caused by improper handling or non-observance of safety instructions. Warranty/guarantee becomes void in such cases. Any use other than described herein will damage the device. Do not make structural modifications; otherwise, safe operation cannot be assured.

ATTENTION! RISK OF ELECTRIC SHOCK! Do not open the housing. The device contains no serviceable parts. Contact service for malfunctions. Work on the power network must be carried out by a qualified electrician only in a de-energized state. The device is not suitable for isolation; the load is not galvanically separated from the mains. Do not use if visibly damaged. Do not connect several WiFi sockets in series. Unplug immediately in case of failures. De-energized only when disconnected.

ATTENTION! RISK OF FIRE! Do not connect end devices whose unsupervised switch-on could cause fire or other damage (e.g., iron). Do not switch the device in an uncontrolled manner or without supervision. Do not use an extension cable. Ensure the socket is installed close to the connected device, easily accessible, and not covered during operation. Avoid overloading the device. Overload may result in fire risk or damage. Maximum load capacity is 3000 W. Do not connect in series.

Intended Use

The WiFi socket is intended solely for switching connected loads on and off in dry indoor areas.

Installation Information / Distance to Interference Sources

This device operates with the 2.4 GHz b/g/n WiFi protocol. Range in buildings can differ significantly from open areas. Environmental influences like humidity and structural conditions play a role, alongside transmission power and receiver properties. Range can be considerably reduced by:

• Walls made of wood, plasterboard, concrete, reinforced concrete
• Proximity to metal and conductive objects
• Broadband interference (e.g., DECT phones, mobile phones, radio headphones, radio speakers, radio weather stations, baby monitoring systems)
• Proximity to electric motors, transformers, power supply units, computers

Scope of Delivery

• 1 x WiFi socket WA 3000 XS01
• 1 x Operating instructions

Technical Specifications

Product Designation: WA 3000 XS01

Art. no.: 1 29485 0 (DE) / 1 29485 1 (FR)

Radio frequency: 2.4 GHz WiFi

Frequency band: 2.412-2.484 GHz

Max. transmitting power: < 100mW

Wireless IEE standards: IEEE 802.11b /g /n

Operating voltage: 230 V ~ 50 Hz

Switching power: Max. 3000 W

Nominal current: 13A

Ambient temperature: 0°C to 35°C

IP class: IP20

Device corresponds to protection class I, contamination: 2, rated impulse voltage: 2500 V, Operating mode: S1, 1E4, PTI175, level: 3, one-pole switch-off, non-replaceable built-in fuse: Thermal fuse: 250V~ 2A 76°C. Technical modifications reserved.

Device Overview

Features a "Teaching button" with an LED operating display and an ON/OFF button.

LED Status:

• Constantly lit in green: Device is connected to the Internet.
• LED flashes green: Device is in teaching mode.
• LED is lit in red: Device is switched on (ON).

Function

The WiFi socket is part of the brennenstuhl®Connect system, controlled via the brennenstuhl®Connect app. It can be connected directly to the router.

Preparations

Connect the WiFi socket to an easily accessible socket. Ensure the local mains voltage matches the technical data. Before commissioning, check the power consumption of the load to be connected; maximum capacity is 3000 W.

Downloading the App / brennenstuhl®Connect

The WiFi socket is controlled using the brennenstuhl®Connect app, available free of charge from the App Store and Google Play Store. Follow on-screen instructions for download and installation.

Compatible with Google, Apple, and Amazon Alexa.

Commissioning the WiFi Socket

1. Start the brennenstuhl®Connect app.
2. Use the "+" symbol to add new devices.
3. Select the device to install using its article number in the device overview.
4. Set the WiFi socket into teaching mode by pressing the teaching button for approximately 3 seconds.
5. Follow the app's instructions to connect the WiFi socket to your network.

Compatible with Amazon Alexa and Google Assistant

The device is compatible with Amazon Alexa and Google Assistant. For Amazon Alexa, download the brennenstuhl®Connect Skill and search for the WiFi socket. For Google Assistant, open the Google Home app, go to "Add" > "Set-up device", and follow the on-screen menu.

Cleaning the Device

ATTENTION! RISK CAUSED BY ELECTRIC SHOCK! Disconnect the device from the power supply before cleaning. Ensure no liquid penetrates the device, as this can cause a short circuit. Clean with a dry, lint-free cloth. Slightly moisten the cloth for heavy soiling. Do not use solvent-containing detergents, as they may damage the surface and labeling. Never immerse the device in water or other liquids. Ensure the device is completely dry before next use.

Disposal

Packaging is made of environmentally friendly materials and can be disposed of via local recycling centers. For disposal of the used product, contact your local or municipal administration. To protect the environment, do not dispose of the product with domestic waste; dispose of it properly through collection points. Information on collection points and hours can be obtained from your local administrative authority.

Service

For product questions, contact Brennenstuhl at www.brennenstuhl.com or call 00 800 48 72 0 74 1 (free of charge).

Manufacturer

Hugo Brennenstuhl GmbH & Co. KG, Seestraße 1-3, D-72074 Tübingen

H. Brennenstuhl S.A.S., 4 rue de Bruxelles, F-67170 Bernolsheim

lectra technik ag, Blegistrasse 13, CH-6340 Baar

Website: www.brennenstuhl.com

Simplified EU Declaration of Conformity

Hugo Brennenstuhl GmbH & Co.KG declares that the radio system type WA 3000 XS01 complies with directives 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at: www.brennenstuhl.com/konformitaetserklaerung/ke_1294850.pdf and www.brennenstuhl.com/konformitaetserklaerung/ke_1294851.pdf. This device complies with all legal, national, and European requirements. All company names and product designations are trademarks of their respective owners.