Pop-Up Canopy Assembly and Parts Guide
This document provides essential information for assembling, disassembling, and maintaining your Pop-Up Canopy.
Parts List
Please verify that all parts are present and correct. Contact customer support if any parts are missing.
- A. Canopy
- 1 Piece
- B. Rope
- 4 Pieces
- C. Stake
- 8 Pieces
- D. Sandbag
- 4 Pieces
- E. Wheel Bag
- 1 Piece
(Visuals on the original document show graphical representations of each part.)
Assembly Instructions
Estimated Assembly Time: Up to 10 minutes. Recommended Personnel: 2 people.
Step 1: Frame Preparation
Begin by unfolding the central frame mechanism. The frame consists of interconnected poles that extend and retract. Ensure the frame is partially extended to allow for canopy attachment.
(Visuals show the frame mechanism being opened and manipulated.)
Step 2: Drape Canopy
With the frame partially extended, carefully drape the canopy fabric over the top of the frame. Align the canopy so it covers the frame evenly.
(Visuals show the canopy fabric being placed onto the frame and details of frame joints.)
Step 3: Extend Frame and Secure Canopy
Gently pull down on the frame legs to fully extend the canopy. As the frame extends, the canopy will become taut. Ensure the canopy edges are secured to the frame legs.
(Visuals show the frame legs being pulled down and details of securing the canopy.)
Step 4: Stabilize Canopy
Once fully assembled, it is recommended to use the provided sandbags and stakes to secure the canopy to the ground. Place sandbags at the bottom of each post and use stakes to anchor the canopy, especially in windy conditions.
(Visuals show the assembled canopy with sandbags attached to the legs.)
Closing Instructions
Step A: Prepare for Collapse
Ensure the canopy is clear of any items. The canopy should be in its fully assembled state.
Step B: Lower Canopy Top
Gently pull down on the canopy fabric from the top center to begin the collapsing process.
Step C: Collapse Frame
Push the frame legs inwards towards the center. The interconnected poles will retract, causing the canopy to fold.
(Visuals show the frame collapsing inwards and details of frame joints.)
Step D: Fully Collapsed Frame
Continue pushing the frame legs together until the entire structure is fully collapsed into a compact form.
(Visuals show the frame in a fully collapsed state.)
Step E: Store in Bag
Place the collapsed frame and canopy into the provided wheeled carry bag for storage and transport.
(Visuals show the collapsed frame being placed into the wheeled bag.)
⚠️ WARNING
- Be careful not to pinch hands or appendages during assembly or disassembly.
- It is recommended that you use the ropes and stakes to secure the canopy to the ground.
- The canopy should not be left up in the rain. This product is not intended to withstand constant rain or inclement weather.
