Pwnage StormBreaker Max CF Gaming Mouse User Manual

What's in the Box

The following items are included with your Pwnage StormBreaker Max CF Gaming Mouse:

• StormBreaker Max CF Gaming Mouse: The primary gaming peripheral.
• High speed USB Receiver Pyramid: A triangular USB receiver for wireless connectivity, featuring the Pwnage logo.
• Black Grip Tapes: Adhesive strips designed to enhance grip on the mouse.
• USB-C Cable: A versatile cable for wired connection or charging.

Visuals depict the StormBreaker Max CF Gaming Mouse, the triangular Pwnage USB receiver, and black grip tapes.

Function Layout

Understanding the buttons and features of your StormBreaker Max CF Gaming Mouse:

Top View

The top of the mouse displays:

• A. Left mouse button
• B. Scroll wheel
• C. Right mouse button

Side View

The sides of the mouse feature:

• D. Forward button
• E. Back button

Bottom View

The underside of the mouse includes:

• F. USB Type C port
• G. PTFE mouse feet for smooth gliding
• H. Pwnage adjustable sensor
• I. ON/OFF Switch

Diagrams illustrate the top, side, and bottom views of the mouse, clearly labeling each component from A to I.

Combined Function Keys

DPI Stages

The mouse supports the following DPI stages:

• 400 DPI (Red indicator)
• 800 DPI (Green indicator)
• 1600 DPI (Default, Dark blue indicator)
• 3200 DPI (Orange indicator)
• 6400 DPI (Yellow indicator)

To cycle through DPI stages: Press and hold buttons E + B + C simultaneously for 3 seconds. The indicator light will change color to reflect the selected DPI setting, which can be further customized in the software.

Polling Rate Modes

The available Polling Rate modes are:

• 125Hz
• 250Hz
• 500Hz
• 1000Hz (Default)
• 2000Hz
• 4000Hz
• 8000Hz

To cycle polling rate: Press and hold buttons A + B + C simultaneously for 3 seconds. A single light flash indicates successful switching.

Lift Off Distance (LOD) Settings

The Lift Off Distance (LOD) settings are:

• 1mm (default)
• 2mm

To adjust the LOD: Press and hold buttons D + B + A simultaneously for 3 seconds. A single yellow light flash signifies successful switching.

Diagrams on pages 4 and 5 show the relevant buttons (A, B, C, D, E) for these functions and illustrate the DPI/Polling Rate cycling process.

Sensor Position Customization

The sensor position can be adjusted for optimal performance:

1. Loosen the screws slightly with a screwdriver.
2. Use the screwdriver to move the screws up and down to adjust the sensor position.
3. Tighten the screws after positioning the sensor to your preference.

A diagram on page 5 shows the underside of the mouse with adjustable screws and arrows indicating the direction of movement for the sensor.

Connecting Your StormBreaker

A. Via Wired Mode

Connect the mouse using the provided USB-C cable to a USB Type-A port on your computer.

A diagram illustrates connecting the USB-C cable from the mouse to a USB Type-A port on a computer or laptop.

B. Via Pwnage HyperSpeed Pyramid Wireless (2.4GHz) Mode

Connect the Pwnage HyperSpeed Pyramid Wireless receiver to a USB Type-A port on your computer. The mouse will then connect wirelessly to the receiver.

Note: The Pyramid receiver will flash a red LED light during connection. Once connected to the mouse, it will display a solid white LED light.

For optimal wireless performance, place the Pyramid receiver within 12"-24" of the mouse and away from sources of 2.4GHz interference, such as Wi-Fi routers.

A diagram shows the connection process: USB Type-A port on a computer, connected via USB-C cable to the Pyramid receiver, which then communicates wirelessly with the mouse.

Mouse Sleep Settings

Further customization of sleep settings is available via the StormBreaker Software.

Defaults

• Level 1 Sleep: If no movement or button press is detected for 30 seconds (default), the mouse enters the first level of sleep mode. It wakes up upon any movement or key press.
• Level 2 Sleep: If no movement or button press is detected for 5 minutes, the mouse enters a secondary sleep mode. In this mode, the 2.4GHz connection is disconnected, and the Sensor LED is turned off. Wake up by pressing any key.

Low Power Alert and Charging Display

In wireless mode, the mouse's light indicator will flash red 3 times every 5 seconds when the battery is low. This red flashing stops when the mouse enters a sleep mode.

To charge the mouse: Disconnect the provided cable from the HyperSpeed pyramid receiver and plug it into the mouse. The mouse light indicator will remain a solid red color while charging and will turn off when fully charged.

A diagram illustrates the charging setup: connecting the USB-C cable from a computer's USB Type-A port (via the Pyramid receiver) to the mouse. A charging indicator symbol [charging indicator] is shown.

Safety Guidelines

1. Do not expose the gaming mouse to liquid, extreme temperatures, humidity, dust, or direct sunlight.
2. Do not attempt to disassemble or modify the gaming mouse.
3. Do not attempt to clean the gaming mouse with any liquids or chemicals.
4. Do not use the gaming mouse if it is damaged or malfunctioning.
5. Do not use the gaming mouse if the Li-ion battery is damaged or leaking.
6. Do not insert any foreign objects into any of the mouse openings.

Maintenance Guidelines

1. Ensure the gaming mouse is powered off before cleaning.
2. Use a damp cloth to gently wipe the surface of the gaming mouse to remove any dirt or dust.
3. Store the gaming mouse in a cool, dry place when not in use.
4. Use compressed air duster to blow out and remove dust & debris from hard-to-reach areas inside the mouse.

RF Warning Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Copyright

© 2024 Pwnage, LLC. All rights reserved. Pwnage and Pwnage logo are trademarks or registered trademarks of Pwnage, LLC in the United States or other countries. All other trademarks are the property of their respective owners.

Limited Product Warranty

For the latest and current terms of the Limited Product Warranty, please visit www.pwnage.com.

Limitation of Liability

Pwnage shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive, or consequential or incidental damages arising in any way out of the distribution of, sale of, resale of, use of, or inability to use the product.

General

These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Pwnage reserves the right to amend any term at any time without notice.