Welcome
Thank you for choosing the FITUEYES Eiffel Series FT65 TV Stand. This guide provides step-by-step instructions to ensure a smooth and safe assembly process for your new television stand.
Safety Precautions ⚠️
- Please read all instructions carefully before beginning assembly.
- Keep small parts and hardware away from children to prevent choking hazards.
- Assemble the stand on a soft, level surface, such as a carpet, to avoid scratching the parts or your floor.
- Ensure all screws are tightened securely, but do not overtighten, as this may damage the components.
- Verify that the stand is stable and level before placing your television on it.
- Do not exceed the weight capacity specified for this stand (refer to product specifications if available).
Parts List
Please check that you have all the parts listed below before starting assembly. If any parts are missing or damaged, please contact FITUEYES customer support.
| Identifier | Description | Quantity |
|---|---|---|
| A | Base Plate | 1 |
| B | Main Vertical Support Pole | 1 |
| C | Upper Support Bracket | 1 |
| D | TV Mounting Brackets | 2 |
| E | M6 x 15mm Screws (for TV attachment) | 4 |
| F | M8 x 25mm Screws (for stand assembly) | 4 |
| G | M8 Washers | 8 |
| H | Allen Wrench | 1 |
| I | Cable Management Clips | 2 |
Tools Required
- Phillips Head Screwdriver (not included)
- Level (optional, recommended for final placement)
Assembly Instructions
-
Step 1: Attach Vertical Support to Base
Place the Base Plate (A) on your work surface. Align the Main Vertical Support Pole (B) with the designated mounting holes on the Base Plate (A). Insert two M8 x 25mm Screws (F) with M8 Washers (G) through the base and into the support pole. Use the Allen Wrench (H) to tighten securely. Repeat for the second screw.
-
Step 2: Attach Upper Support Bracket
Align the Upper Support Bracket (C) with the top of the Main Vertical Support Pole (B). Insert two M8 x 25mm Screws (F) with M8 Washers (G) through the bracket and into the pole. Use the Allen Wrench (H) to tighten securely.
-
Step 3: Attach Mounting Brackets to TV
Identify the VESA mounting holes on the back of your television. Attach the two TV Mounting Brackets (D) to the TV using the M6 x 15mm Screws (E). Ensure the brackets are oriented correctly according to your TV's VESA pattern and that the screws are snug but not overtightened. ⚠️ Verify screw length is appropriate for your TV model.
-
Step 4: Mount TV to Stand
Carefully lift your television and align the attached Mounting Brackets (D) with the Upper Support Bracket (C) on the stand. Slide the brackets onto the support until they lock into place. Ensure the TV is securely seated and stable. Some models may have additional locking screws; refer to specific TV manual if needed.
-
Step 5: Install Cable Management Clips
Attach the Cable Management Clips (I) to the Main Vertical Support Pole (B) at desired locations to help organize your TV cables.
Final Checks and Adjustments
- Double-check that all screws used during assembly are fully tightened.
- Ensure the TV stand is stable and does not wobble.
- Use a level to confirm the television is straight. Adjust the stand or TV mounting if necessary.
- Connect your power and AV cables.
Care and Maintenance
To maintain the appearance and longevity of your FITUEYES TV stand:
- Clean the surfaces regularly with a soft, slightly damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as they can damage the finish.
- Wipe up spills immediately to prevent staining.
Support and Contact
For further assistance, troubleshooting, or warranty information, please visit the official FITUEYES website at www.fitueyes.com.
You can also contact FITUEYES customer support through the channels provided on their website.