Metra Online | Welcome to Metra Auto Parts Online WarehouseMetra Online
User Manual for Metra models including: 95-6545B Radio, 95-6545B, Radio
Metra 956545B - Jeep Compass Sport 2017.5-2018 - Radio installation parts - Custom Sounds & Tint
File Info : application/pdf, 4 Pages, 626.51KB
DocumentDocumentKIT COMPONENTS · A) Radio trim panel · B) Radio brackets · C) (7) Panel clips A B 95-6545B INSTALLATION INSTRUCTIONS Jeep Compass Sport 2017.5-2018 Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications KIT FEATURES · ISO DDIN radio provision · Painted matte black TABLE OF CONTENTS Dash Disassembly..................................................2 Kit Preparation.......................................................2 Kit Assembly ..........................................................3 WIRING & ANTENNA CONNECTIONS (sold separately) Wire harness: AXVI-6523 Antenna adapter: 40-EU10 Steering wheel control interface: AXSWC TOOLS REQUIRED C · Panel removal tool · Phillips screwdriver Metra. The World's Best Kits.® MetraOnline.com Attention! Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 7/7/20 INST95-6545B DASH DISASSEMBLY 1. Unclip and remove the a/c vent panel surrounding the radio. (Figure A) 2. Remove (4) 9/32" screws securing the radio, then unplug and remove the radio. Continue to Kit Preparation (Figure A) KIT PREPARATION 1. Attach the (7) panel clips to the radio trim panel. (Figure A) Continue to Kit Assembly 2 386.257.1187 | MetraOnline.com ISO DDIN radio provision 1. Attach the radio brackets to the radio using the screws supplied with the radio. (Figure A) 2. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or Axxess. 3. Test the radio for proper operation. 4. Secure the radio assembly to the dash using the factory screws. 5. Snap the radio trim panel over the radio assembly to complete the installation. (Figure A) KIT ASSEMBLY REV. 7/7/2020 INST95-6545B 3 Metra. The World's Best Kits.® MetraOnline.com 95-6545B INSTALLATION INSTRUCTIONS If you are having difficulties with the installation of this product, contact our Tech Support line either by phone at 386-257-1187, or email at techsupport@metra-autosound.com. Before doing so, look over the instruction booklet a second time and ensure that the installation was performed exactly as the instruction booklet is stated. Have the vehicle apart and ready to perform troubleshooting steps before contacting Metra/Axxess Tech Support. ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 7/7/20 INST95-6545B