CommScope | now meets nextSupport options from CommScope
Product Patent
Instruction Manual for COMMSCOPE models including: SRC100 Tether Repair, SRC100, Tether Repair, Repair
SRC3-U5A1C1BC000 | CommScope
File Info : application/pdf, 1 Pages, 370.67KB
DocumentDocumentTC-1447-AD1 Rev. A April 2022 Installation Instructions SRC 100 Tether Repair The following splice schematic diagrams show how to splice fibers using the SRC100 tether repair kits. CommScope SRC100 universal repair kit can be used to repair tether and terminal tails with fiber counts from 4 to 12. 1 12F Tether Repair 3 6F Tether Repair If cable under repair is 12-Fiber then fibers are spliced straight through for all fibers from 1 to 12, matching fiber colors. 2 8F Tether Repair If cable under repair is 6-Fiber, then splicing starts from fiber number 4 (brown) to fiber number 9 (yellow) on the new tether. 4 4F Tether Repair If cable under repair is 8-fiber cable, then splicing starts from fiber number 3 (green) to fiber number 10 (violet) on the new tether. If cable under repair is 4-fiber, then splicing starts from fiber number 5 (slate) to fiber number 8 (black) on the new tether. 660105822 Rev A Page 1 of 1 Visit our website or contact your local CommScope ® representative for more information. www.commscope.com. All trademarks identified by ® or TM are registered trademarks or trademarks, respectively, of CommScope, Inc. © 2022 CommScope, Inc. All Rights Reserved. This product may be covered by one or more U.S. patents or their foreign equivalents. For patents, see www.cs-pat.com For technical assistance, customer service, or to report any missing/damaged parts, visit us at: http://www.commscope.com/SupportCenter.