GL-iNet-logo

GL iNet FGB-01 Open Source Remote KVM

GL-iNet-FGB-01-Open-Source-Remote-KVM-product

E hoʻomaka kākou

Pono kōkua? E nānā i ka QR code no nā aʻo wikiō a me ke alakaʻi hoʻohana.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-1

NUI PAKE

GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-2

HOOLAHA

  1. Wehe i ka ʻaoʻao hoʻokaʻawale ʻokoʻa pākiki. GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-3
  2. Remove the cover from the notch on 1he side of the device. GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-4
  3. Take out the USB dongle. (FGB-01-D) GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-5
  4. Insert the USB dongle into the Comet {GL-RM1 ). GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-6
  5. The FingerBot can be controlled through the GLKVM app7GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-6

HOOLAHA

  1. Clean the surface of the device before Installation.
  2. Peel off the protective sticker from 1he adhesive on the bottom of the FingerBolt.
  3. Stick the FingerBat near the control button of 1he device. GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-7
  4. Testing pressure levels
    The FingerBot features two different pressing levels. You can adjust the level at any time through the GLKVM App.
    1. Light Press Mode: Use for shorter keys.
    2. Hird Press Mada: Use for longer key.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-11
  5. Operation made
    • The FlngerBot features two different operation modes.. You can adjust the modes at any time through the GLKVM App.
    • Press Mode: Pressing the button or controlling one-way switches. Ideal for tasks like powering on a PC.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-8
  6. lnstallallan an the laplap
    Nānā:
    Only for laptops with edge-mounted power buttons.
    1. Secure the bracket in the desired position and tighten it.
    2. Attach the FingerBot to the bracket and test its alignment.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-9
  7. Tesl button
    Use the test button to find your preferred pressing level:
    1. First press – FingerBot extends to Light Press.
    2. Second press – FlngerBot extends to Hard Press.
    3. Third press – FingerBot retracts.GL-iNet-FGB-01-Open-Source-Remote-KVM-fig-10

PANUI BATTERY

How ta replaC41 your battery;

  1. E hoʻomākaukau i kahi pākaukau CR2.
  2. Remove the cowr from 1he notch on the side of the device.
  3. E hoʻololi i ka pākaukau.
  4. Put the cover back on the device

KOKUA

Set up video and FAQs
No nā ʻōlelo kikoʻī hou aʻe, e kipa i kā mākou webpaena

PALAPALA

  • We provide a two-year limited warranty for the product and a 3-month limited warranty for accessories.
  • An extra warranty may apply according to the local law in which the product purchase took place.
  • Any damage to the caused by not following the instructions will render this warranty null and void.
  • Any damage to the product caused by modifying the PCBA, components, or case will render this warranty null and void.
  • ʻAʻole hiki ke loaʻa ke kākoʻo kūhelu mai iā mākou nā pilikia i hoʻohana ʻia e ka firmware ʻaoʻao ʻekolu.
  • Any damage to the product caused by inappropriate use, e.g., inappropriate voltage input, high temperature, dropping in the water or on the ground, will render this warranty null and void.
  • Pictures in the instructions are only for reference. We reserve the right to change or modify these materials without further notice.

Keena o Hong Kong
GL Technologies (Hong Kong) Limited Unit 601, Building 5W, Hong Kong Science Park, Shatin, NT, Hong Kong

Keena o Shenzhen
Shenzhen Guanglianzhitong Tech Co., Ltd. lumi 305 - 306, Skyworth Digital Building, Shiyan Street, Baoan District, Shenzhen, Kina, 518000 ( + 86-0755-86606126 )

Hoʻolaha FCC

No ka hōʻoiaʻiʻo ʻana i ka hoʻomau ʻana, nā hoʻololi a i ʻole nā ​​hoʻololi i ʻae ʻole ʻia e ka pāʻina. Hiki i ke kuleana o ka hoʻokō ke hoʻopau i ka mana o ka mea hoʻohana e hana i kēia mea hana.

ʻŌlelo FCC
Hoʻopili kēia mea hana i ka Māhele 15 o nā Rula FCC. Aia ka hana i nā kūlana ʻelua:

  1. ʻAʻole hiki i kēia mea hana ke hoʻopilikia ʻino, a
  2. Pono kēia hāmeʻa e ʻae i nā hoʻopaʻapaʻa i loaʻa, me ka hoʻopili ʻana i hiki ke hana ʻole ʻia.

MANAʻO: Ua hoʻāʻo ʻia kēia mea hana a ua ʻike ʻia e hoʻokō i nā palena no kahi hāmeʻa kikohoʻe Papa B, e like me ka ʻāpana 15 o nā lula FCC. Hoʻolālā ʻia kēia mau palena no ka hāʻawi ʻana i ka palekana kūpono mai ka hoʻopilikia ʻino ʻana i kahi hoʻonohonoho hale. Hoʻohana, hoʻohana a hiki ke hoʻomālamalama i ka ikehu alapine lekiō a inā ʻaʻole i hoʻokomo ʻia a hoʻohana ʻia e like me nā kuhikuhi, hiki ke hoʻopilikia i nā kamaʻilio lekiō. Eia nō naʻe, ʻaʻohe mea e hōʻoiaʻiʻo ʻaʻole hiki ke keakea i kahi hoʻonohonoho. Inā hoʻopilikia kēia mea hana i ka lekiō a i ʻole ke kīwī, hiki ke hoʻoholo ʻia ma ka hoʻopau ʻana i nā mea hana, paipai ʻia ka mea hoʻohana e hoʻoponopono i ka hoʻopili ʻana ma o kekahi a ʻoi aku paha o kēia mau ana:

  • Hoʻonohonoho hou a hoʻoneʻe paha i ka antenna e loaʻa ana.
  • E hoʻonui i ka kaʻawale ma waena o nā mea hana a me ka mea hoʻokipa.
  • E hoʻohui i nā mea hana i kahi puka ma kahi kaapuni ʻokoʻa mai ka mea i hoʻopili ʻia ai ka mea hoʻokipa.
  • E kūkākūkā i ka mea kūʻai aku a i ʻole kekahi mea loea lekiō/TV no ke kōkua.

Hōʻike Hōʻike Hōʻikeʻike FCC
The equipment complies with the FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. EU Declaration of Conformity Hereby, GL Technologies (Hong Kong) Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53 /EU and 2011/65/EU. A copy of the EU Declaration of Conformity (DoC) is available online at https://www.gl-inet.com/products/certificate.

ALOHA
Loaʻa i ke ahi a pahū paha inā hoʻololi ʻia ka pākaukau me kahi ʻano hewa.

  • Hoʻololi i kahi pākaukau me kahi ʻano hewa e hiki ke lanakila i kahi pale (no ka example, i ka hihia o kekahi mau ʻano pākahi lithium).
  • ʻO ka hoʻolei ʻia ʻana o ka pākaukau i ke ahi a i ʻole ka umu wela, a i ʻole ka ʻoki ʻana a i ʻole ka ʻoki ʻana i ka pākaukau me ka mīkini, hiki ke hopena i kahi pahū.
  • Ka waiho ʻana i kahi pākaukau i kahi wela kiʻekiʻe a puni e hiki ke hopena i kahi pahū a i ʻole ka leaka o ka wai a i ʻole ke kinoea; a
  • ʻO kahi pākaukau i hoʻopaʻa ʻia i ke kaomi ea haʻahaʻa loa i hiki ke hopena i ka pahū a i ʻole ka leaka o ka wai a i ʻole ke kinoea.

Palapala / Punawai

GL iNet FGB-01 Open Source Remote KVM [pdf] Palapala Hoʻohana
FGB01D, 2AFIW-FGB01D, 2AFIWFGB01D, FGB-01 Open Source Remote KVM, FGB-01, Open Source Remote KVM, Source Remote KVM, Remote KVM, KVM

Nā kuhikuhi

Waiho i kahi manaʻo

ʻAʻole e paʻi ʻia kāu leka uila. Hōʻailona ʻia nā kahua i makemake ʻia *