DIGITUS-logo

DIGITUS DS-55319 Click and Present Mini Wireless Presentation System

DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-Product

Introduction

Me ka Pūnaehana Hōʻike ʻole, hiki iā ʻoe ke hoʻouna i nā wikiō HDMI a me nā hōʻailona leo leo i ka Full HD ma kahi mamao a hiki i 50 m me kahi mea keakea ʻole. view. Operation and installation are super simple. Real Plug & Play – Just plug in and get started. With additional transmitters (DS-55320), the set can be extended to up to 16 transmitter units (total). Switch to the desired transmitter quickly and easily at the press of a button in order to reproduce your content. You can also share content directly from your mobile device (smartphone/tablet) using your device’s OS directly, no additional app is required. The transmitter and receiver can be supplied with power via your device’s HDMI connection (0.5A required), or alternatively (additionally) with the enclosed Micro USB cable via the USB connection of your notebook, PC, etc. Thanks to the compact design of the transmitter and receiver, installation is easy, quick, and can be customized – the perfect solution for meeting and conference rooms.

Nā Mea Aʻo

  • ʻO ka hoʻouna ʻana i ka hōʻailona HDMI ʻole a hiki i 50 m (me kahi mea ʻole view)
  • Supports up to 16x transmitters (sources) + 1x receiver (output device)
  • Extend this set with up to 16 transmitter units (DS-55320)
  • E hoʻololi i ka transmitter makemake me ka wikiwiki a me ka maʻalahi ma ke kaomi ʻana i kahi pihi i mea e hana hou ai i kāu ʻike
  • Supports sharing from a mobile device (smartphone/tablet) via the OS of the mobile device, no app is required
  • Supports Windows, iOS, iPad, Android
  • Kākoʻo i nā hoʻoholo a hiki i ka Full HD (1080p / 60 Hz)
  • ʻO ka hana maʻalahi a me ka lawelawe ʻana e mahalo iā Plug & Play - Hoʻopili wale a hoʻomaka
  • The transmitter and receiver can be supplied with power via your device’s HDMI connection (> 500 mA required) To have a safe and stable operation, we recommend to use always the Micro USB cable for the power supply of TX and RX

Hōʻuluʻulu Paena

  • 1x Mea hoʻouna
  • 1x Mea hoʻokipa
  • 1x Wifi / Power cable (75 cm) for RX
  • 1x Micro USB cable (80 cm) for TX
  • 2x uwea hoʻonui HDMI (15 knm)
  • 1x QIG

Nā Huahana Huahana

hiʻona Description
Kuʻina a paani Hoʻopili wale i ka transmitter me nā awa PC HDMI a hoʻopili i ka mea hoʻokipa me ka pale, e hoʻopili ka mea hoʻouna a me ka mea hoʻokipa.

'akomi'

App Free The Wireless Presentation System Set doesn’t need any software or app installation, no setup, no IT

hui

Hoʻokahi i hoʻokahi Kākoʻo pū kekahi i ka mea pāʻani Blu-ray / DVD, ka mea pāʻani media a me kekahi

mea me ka jack HDMI

Koho Kanal Auto The Wireless Presentation System Set will select the best Wi-Fi channel automatically after power on to ensure streaming

mālie

ʻO ka wikiwiki wikiwiki me ka ʻenehana 5G AC MIMO The Wireless Presentation System Set comes with the fast 802.11ac MIMO technology which increases Wi-Fi speeds by allowing a pair of wireless devices to simultaneously send or receive

nā kahawai ʻikepili lehulehu

1080p60 Kiʻekiʻe wikiō The Wireless Presentation System Set supports 1080p resolution,

which means much more clear

pictures, rich in details and

texture compared with 720p.

Palekana Palekana Kiʻekiʻe No worries about the data security, the Wireless Presentation System Set supports AES 128-bit security encryption and WPA2/WPA-PSK/WPA2-PSK

authentication protocol to protect data. HDCP is supported

to protect the content

Nāʻikepili huahana

hiʻona
Nā Hōʻike Pūnaewele 1920×1080 (1080p60/50/30/25/24,

1080i60/50)

1280×720 (720p60/50)

720×576 (576p50)

720×480 (480p60)

Hōʻike wikiō Up to 1080p / 60Hz
Audio Stereo, maikaʻi 16bits 48KHz
Wireless Channel IEEE 802.11ac, 5GHz, 2T2R
Latency Ma kahi o 120ms latency
HDMI Version HDMI 1.4 me HDCP1.3
hōʻoiaʻikepili pilikino

Hōʻoia

WPA2 (WPAS-PSK / WPA2-Enterprise)
maluhia AES 128 bit
Kākoʻo ʻia ka paepae Windows, macOS, iOS, Android
Ka mamao Ma kahi o 50 mika ma ka laina maopopo o

ʻike

lēkio leo
nānaina HDMI in jack x 1, Micro USB x 1, button

x 1

alakai ʻO Red a me Blue
Pihi kuapo 1 x
Lako ikehu DC5V / 0.5A
Ke Mana Mana Ma kahi o 2,5 W
Ana 83 m 32 m 13mm
Weight 27.1 G
pa alima
nānaina HDMI out jack x 1, Micro USB x 1,

pihi x 1

alakai ʻO Red a me Blue
Lako ikehu DC5V / 0.5A
Ke Mana Mana E pili ana iā 2.5W
Ana 83 m 32 m 13mm
Weight 27.1 G
mahana pilikino
pae'ōnaehana 0°C a i +40°C (+32°F a i +104°F)
pūnaewele -10 ° C a + 60 ° C (+ 14 ° F a + 140 ° F)
Kawaūea
pae'ōnaehana 10% a 80% pili i ka hoʻohaʻahaʻa

Aia ma lunaview

Wahi Hoʻolaha DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-1

1. HDMI i loko Connect source devices, like with a computer or other devices with HDMI, the HDMI in also supports 5V power if the source devices

has HDMI with a 5V output

2. Pihi Paʻi pōkole: hoʻomaka e hoʻolei

Long press: long press up to 10

seconds for factory reset

2.LEDs E hōʻike i nā kiʻi like ʻole
3. Kelepona Micro No ka lako mana

i hoʻopuka: if the source device has a HDMI with 5V power output, then there is no need to connect an USB cable for power.

Hōʻike LED o ka

Wahi Hoʻolaha

Description
ʻUlaʻula kūpaʻa Transmitter Unit system is

booting on

ʻUlaʻula uila Transmitter Unit is searching for

ʻĀpana Paʻa

Polū polū Ke kali nei no ka pili
Pulu polū Connected and started to

keia

Poni ʻAʻohe HDMI i loko

ʻĀpana PaʻaDIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-2

1. HDMI waho Connect with monitor or

ka mea kiʻi

2. Pihi: Press 10 seconds for factory

hoʻonohonoho

2.LEDs E hōʻike i ke kūlana like ʻole
3. Kelepona Micro No ka lako mana
Hōʻike LED o ka

ʻĀpana Paʻa

Description
Polū polū Ke kali nei no ka pili
Pulu polū Connected and started to

keia

mea hoʻonoho

Hoʻokomo o ka mea loaʻa
  1. Connect with TV or projector
    • Connect the Receiver HDMI Unit with the big screen TV or projectors HDMI jack
    • Connect the Micro USB port of the Receiver to the USB port of the TV through the Wifi USB connection/power supply cable. DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-3
  2. Hoʻohui i ka Pūnaewele 
    • Connect the Receiver SSID with your smart devices, the SSID and password are shown on the left upper corner of the screen DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-4
      DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-5
    • Open the browser with your phone, and input the IP address which shows on the left upper corner of the screen to enter to the Receivers management platform
      i hoʻopuka: when connect to the router, the IP address will be updated accordingly DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-6
    • Select the network and connect in the management platform, the Receiver Unit will link to the network and show the network SSID on the middle of the screen (to get a better performance, we recommend connecting with 5G router) The platform will list all your wireless router SSID, select the SSID from the wireless router and enter the password. The Receiver Unit will link to the network and show the network SSID on the middle of the receiver screen (to get a better performance, we recommend connecting with 5G router) DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-7
  3. 'ōlelo 
    • User can change language in the management page DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-8
  4. Kūlana pale 
    • If the Receiver HDMI out size is not compatible with the display, user can use Screen Position to adjust the zoom in and zoom out of the screen DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-9
  5. Streaming mode 
    • You can select to use streaming or mirror mode DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-10

Ke hoʻonoho uila

  1. Connect the Transmitters HDMI Unit to PC HDMI port Remark: If the source device HDMI has a 5V power output, then there is no need to connect a USB cable for power. If not, please connect the Transmitter with PC by USB cable for power.
  2. The LED indicator of the Transmitter will turn red when it’s booting up.
  3. E lilo ana ka hōʻailona LED i polū a ʻālohilohi ke mākaukau e kahe
  4. E kaomi i ke pihi e hoʻomaka i ka hoʻolei ʻana, e lilo ka hōʻailona LED i polū mau

Hoʻopili i ka mea hoʻouna a me ka mea lawe

A set of the Wireless HDMI Extender Set includes one receiver and one transmitter, which are paired before shipment. Normally you don’t need to pair them again. However, if you buy an additional transmitter, you need to follow the instruction below to pair the new transmitter with the receiver.

  1. E mana i ka mea hoʻokipa a hoʻohui me ka hōʻike
  2. E hoʻohana i ka mea hoʻouna a hiki i ka huli ʻana o ka LED i ʻulaʻula, a laila kaomi i ke pihi a hiki i 5 kekona a lilo ka LED i ʻulaʻula wikiwiki, ʻo ia ke ʻano o ka ʻāpana transmitter i ke ʻano hana hoʻonohonoho.
  3. Wait around 15 seconds, the button light of the Transmitter will turn to constant blue from the red light, and the pair successful message will be displayed on the Receiver Unit screen

Wewelo

Ke hoʻoheheʻe ʻia mai ka Transmitter

  1. E hoʻokuʻi i ka Unit HDMI Transmitter i kahi awa PC HDMI
    i hoʻopuka: inā ʻo nā kumu kumu HDMI me ka mana mana 5V, a laila ʻaʻohe pono e hoʻopili i kahi kelepona USB no ka mana, inā ʻaʻole, e ʻoluʻolu e hoʻopili i ka Unit Transmitter me PC ma ke kelepona USB no ka mana. No ka loaʻa ʻana o kahi hana palekana a paʻa, paipai mākou e hoʻohana mau i ke kelepona Micro USB no ka hāʻawi mana o TX a me RX.
  2. E ʻulaʻula ka hōʻailona LED o ka Transmitter i ka wā e hoʻomaka ana
  3. E lilo ana ka hōʻailona LED i polū a ʻālohilohi ke mākaukau e kahe
  4. E kaomi i ke pihi e hoʻomaka i ka hoʻolei ʻana, e lilo ka hōʻailona LED i polū mau

Streaming from smart devices (smartphone/tablet)

i hoʻopuka: If a HDMI Transmitter (TX) is connected with the HDMI Receiver (RX), please unpair/disconnect the TX and the RX by press the button on TX first, start screen will be shown. Then you can connect a mobile device. Priority is HDMI Transmitter (TX) before mobile device (smartphone/tablet).  When a mobile device is connected and you want to switch to HDMI transmitter, just press the button on TX to share. You don’t need to disconnect mobile device first.
IOS Devices: 

  • Search RX (Receiver) SSID and connect in Wifi settings. (SSID: DIGITUS…, Password: 12345678), the is SSID shown on the left upper corner of the RX start screen
  • Use the screen mirroring function of the smartphone
  • Choose RX (Receiver) DIGITUS-… to start sharingDIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-11

Hāmeʻa Android:  

  • Make sure the Wi-Fi of your android device is activated/available
  • Go to the Mirror/Share/Cast function of the smartphone
  • Choose RX (Receiver) DIGITUS-… to start sharing DIGITUS-DS-55319-Click-and-Present-Mini-Wireless-Presentation-System-fig-12

i hoʻopuka: there are different names on different brands of phones or tablets: WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, Wireless Display, MirriorShare, etc.

Pākuʻi pinepine & Mana Hoʻouna Maximum

  • Wifi Kūlana: 802.11b/g/n/ac 5G WiFi
  • Channel: 36, 40
  • Ka pinepine kumu: 5180, 5200
  • Pae: 5170 ~5 210MHz
  • ʻAilima 20 / 40MHz
  • Mana transmitter: 13 dBm max
  • Mana SW: RX: 2.69, TX: 2.3.9
  • Mana HW:
    • TX: S100TX-LC01-01
    • RX: S100RX-LC01-01

Nā ʻōlelo aʻo palekana koʻikoʻi

E ʻoluʻolu e heluhelu pono i nā ʻōlelo aʻo palekana ma mua o ka hoʻouka ʻana a me ka hana.

  1. E nānā i nā ʻōlelo aʻoaʻo a me nā ʻōlelo aʻo e pili ana i kēia hāmeʻa
  2. Mai hōʻike i ka hāmeʻa i ka ua, ka makū, nā mahu a me nā wai
  3. Mai hoʻokomo i kekahi mea i ka hāmeʻa
  4. Mai hoʻāʻo e hoʻoponopono hou i ka mokuna iā ʻoe iho a wehe i ka ʻaha kuhina. Pilikia o ka uila uila!
  5. E hōʻoia i ka ea kūpono e pale ai i ka pohō ma muli o ka wela
  6. Hoʻopio i ka lako uila a ʻike i ka palekana o ke kaiapuni ma mua o ke kau ʻana
  7. In the event of thunderstorms, there is a risk of lightning strikes and damage to connected electrical equipment due to overvoltage
  8. Mai hoʻokomo i kēia hāmeʻa i ka wā o ka hekili
  9. E hoʻokaʻawale i ka hāmeʻa mai nā mīkini uila pili i ka wā o ka hekili
  10. E hoʻohana i ka hāmeʻa i loko o nā hale wale nō
  11. E hoʻihoʻi i ka hāmeʻa i kāu mea kūʻai aku inā e hoʻoponopono
  12. Hiki i ka lepo, ka makū, ka mahu, a me nā mea hoʻomaʻemaʻe ikaika a i ʻole nā ​​solvents hiki ke hōʻino i ka hāmeʻa
  13. E hoʻokaʻawale i ka hāmeʻa mai ka lako o ka mana a me nā hāmeʻa i hoʻopili ʻia ma mua o ka hoʻomaʻemaʻe
  14. E hoʻomaʻemaʻe i ka hāmeʻa me ka lole lint-free

Akahana

ʻO nā huaʻōlelo HDMI a me HDMI High-Definition Multimedia interface, a me ka HDMI Logo he mau hōʻailona a i ʻole hōʻailona inoa inoa o HDMI Licensing LLC ma United States a me nā ʻāina ʻē aʻe. Ma kēia ʻōlelo ʻo ASSMANN Electronic GmbH ʻo ka Hōʻike o ka Conformity kahi ʻāpana o ka ʻikepili hoʻouna. Inā nalo ka Hōʻike o ka Conformity, hiki iā ʻoe ke noi iā ia ma ka leka ma lalo o ka helu o ka mea hana i ʻōlelo ʻia ma lalo nei.  www.kalahiki.com ʻO Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Kelemānia

Palapala / Punawai

DIGITUS DS-55319 Click and Present Mini Wireless Presentation System [pdf] Palapala Hoʻohana
DS-55319, Click and Present Mini Wireless Presentation System, DS-55319 Click and Present Mini Wireless Presentation System, Mini Wireless Presentation System, Wireless Presentation System, Presentation System

Waiho i ka manaʻo hoʻopuka

Ko oukou mail aae? E, aole e paʻiʻia.