Document

File:Halo (series) logo.svg - Wikipedia

Liquid Soap Dispenser
Instruction ManualHALO Liquid Soap Dispenser

Installation instructions for HALO soap dispenser

Box Contents:

  • 1 Dispenser
  • 1 Opening Key
  • 4 Fitting Screws and Plugs

Tools Required:

  • Drill
  • Screwdriver

HALO Liquid Soap Dispenser fig 6Open the unit with the key provided.HALO Liquid Soap Dispenser fig 5

Remove the reservoir and put to aside for installation.HALO Liquid Soap Dispenser fig 4

Mark out the holes for fixings.HALO Liquid Soap Dispenser fig 3

Please see the pre-installed spirit level to aid installation.HALO Liquid Soap Dispenser fig 2

Drill the marked-out holes to the size of the fixings provided then use a screwdriver to fix the unit to the wall. The unit should be hand-tight to the wall.
HALO Liquid Soap Dispenser fig 1Reattach the reservoir and fill it with the relevant product to the pump supplied.
HALO Liquid Soap Dispenser figPrime the dispenser by pushing the button, after a few pumps, the soap should start to flow, and the unit is ready to be used.

Documents / Resources

HALO Liquid Soap Dispenser [pdf] Instruction Manual
Liquid Soap Dispenser

Leave a comment

Your email address will not be published.