HAGOR CON-Line T1 Media Furniture



Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the spe-cial conditions at the installation site. Please check this in advance and replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.

Scope of deliveryHAGOR-CON-Line-T1-Media-Furniture-FIG 1


VESA-Montageplatte.HAGOR-CON-Line-T1-Media-Furniture-FIG 3

Hang the VESA mount / VESA mounting plate at the desired height in the notches on the column.HAGOR-CON-Line-T1-Media-Furniture-FIG 9

Mount the VESA arms to the back of the screen. Please screw in and tighten the screws carefully to avoid damage. Use suitable screws from the supplied TV screw bag.

HAGOR-CON-Line-T1-Media-Furniture-FIG 4

Now hang the screen with the VESA arms in the VESA mount and align the screen in the middle.

DimensionsHAGOR-CON-Line-T1-Media-Furniture-FIG 5

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de

Documents / Resources

HAGOR CON-Line T1 Media Furniture [pdf] Instruction Manual
CON-Line T1 Media Furniture, CON-Line T1, Media Furniture, Furniture

Leave a comment

Your email address will not be published. Required fields are marked *