Categories: HAFELE

HAFELE 12V,24V Loox LED Driver Instruction Manual

12V,24V Loox LED Driver
Instruction Manual

12V,24V Loox LED Driver


LED Drivers 12 V/24 V

WARNING
Read the instructions before assembly! Non-compliance with these instructions can lead to electric shock, fire or injury. Likewise, read the instructions for the LED lights and  switches! Keep the instructions in a safe place and give them to the user after assembly.
The controlgear is a Class II independent appliance, which does not rely upon the luminaire enclosure for protection against accidental contact with live parts. Constant  voltage type controlgear.

Electrical safety

Never open or modify product components. Do not insert any foreign objects into the openings of product components, as this could result in electric shock or a short circuit Never expose the product components to moisture and never assemble or store them near water or in damp, aggressive or potentially explosive areas.
Never carry the product by the cable and do not use the cable to pull from the socket. Never drill or damage the cable.
Keep product components away from heat, sharp edges or moving parts. Install product components such that they cannot be accessed by children.

Intended use

The product is intended for:

  • Assembly on/in furniture,
  • Use in dry, interior spaces (Protection class: IP 20),
  • TA Ambient temperature –20 to +45 ºC (-4 ºF to 113 ºF).
    Ensure sufficient air circulation at the installation location.
    Do not stack drivers.

Assembly

Check the scope of delivery before commencing assembly. If parts are missing or damaged, contact the manufacturer. Never use and assemble damaged parts, or small parts  that are not part of the scope of delivery and not approved by Häfele.
All product components must be assembled in a currentless condition. Switch off the power supply [i] before commencing assembly.
Use suitable fixing material for the furniture [1].
Ensure that the total wattage of all connected LED lights and components does not exceed the maximum output power of the driver (see type label) [2].

Cleaning and maintenance

Disconnect from the mains. Clean product components with a soft, dry and fibre-free cloth. Do not use chemical cleaning agents, abrasive cleaners or liquids!
The product does not contain any parts that should be repaired by the user. In the event of a defect, replace the entire assembly.
Contact the manufacturer.

Disturbance
The lights connected to the driver flash:

  • Ensure sufficient air circulation at the installation location.
  • The wattage of the connected lights/devices exceeds the output power of the driver. Reduce the wattage of the connected lights devices.

Disposal:
Do not dispose with the household waste.
Observe country-specific regulations.

Documents / Resources

HAFELE 12V,24V Loox LED Driver [pdf] Instruction Manual
12V 24V Loox LED Driver, 12V Loox LED Driver, 24V Loox LED Driver, Loox LED Driver, LED Driver, Loox, Driver

References

Share

Recent Posts

Novlistve 880788509328 Wireless Earbuds Bluetooth Headphones

Novlistve 880788509328 Wireless Earbuds Bluetooth Headphones SPECIFICATION BRAND Novlistve MODEL NAME 880788509328 COLOR White FORM…

29 mins ago

NEC NP-M322W Smart Digital Projector User’s Manual

NEC NP-M322W Smart Digital Projector

35 mins ago

SOLAX 0148083 BMS Parallel Box-II for Parallel Connection of 2 Battery Strings Installation Guide

0148083 BMS Parallel Box-II for Parallel Connection of 2 Battery Strings Quick Installation Guide ----…

1 hour ago

Otium E8 Bluetooth Wireless Earbuds

Otium E8 Bluetooth Wireless Earbuds SPECIFICATION BRAND Otium MODEL NUMBER E8 COLOR White EAR PLACEMENT…

2 hours ago

LEDVANCE G11151664 Emergency Conversion Box Instruction Manual

G11151664 Emergency Conversion Box EMERGENCY CONVERSION BOX EAN l x w x h [mm] W…

2 hours ago

Mellerware Homy Fan Heater Instruction Manual

Mellerware Homy Fan Heater Instruction Manual Introduction This product is only suitable for well insulated…

2 hours ago