SloanLED 100L1 24 VDC Power Supply - logo100L1 24 VDC Samar da Wutar Lantarki
Shigarwa Shigarwa

SloanLED 100L1 24 VDC Power Supply - figure 1 SloanLED 100L1 24 VDC Power Supply - figure 2
1. Kayayyakin da ake buƙata: Waya masu tsiri, rawar jiki, da screwdriver. 2. Supplies required: Conduit and electrical enclosure for power supply (if not placed in a sign made from enclosure rated material), #8 pan head screws, UL Listed PLTC cable, UL Listed electrical wire connectors (e.g., wire nuts), silicone. Europe: Electrical enclosure for power supply, M4 pan head screws, PLTC cable, silicone, 3M™  Scotchlok™ connectors.
SloanLED 100L1 24 VDC Power Supply - figure 3 SloanLED 100L1 24 VDC Power Supply - figure 4
3. Power Supply: Identify primary wires, secondary wires, and the location of mounting tabs. 4. Mount Power Supplies: Use mounting tab in the corner to secure power supply.
SloanLED 100L1 24 VDC Power Supply - figure 5
5. Connect Primary: CAUTION: Have a licensed electrician connect to the primary.

NOTE: Ensure adequate ventilation. Power supply operating ambient temperature is -40º to 55º C. Power supply must be mounted in an enclosure (i.e., the transformer can/raceway). Power supply spacing to thermoplastic, wood, fiber, or other combustible type enclosure materials shall be 1″ (25 mm). Two or more adjacent power supplies shall not be mounted closer than 1″ (25 mm) end to end or 4″ (102 mm) side to side.
If mounted inside a sign cabinet, UL requires that the cabinet is made from an enclosure-rated material. Ensure power supplies are not overloaded by verifying output current is less than 4.15 DC Amps. It is recommended to use photocells or light sensors to prolong the life of the power supply and to keep unit at maximum operating efficiency.


If the sign is not functioning properly, check the following:

  • Na farko voltage is between 120-277 VAC
  • Secondary voltage is 24 VDC
  • Output current is 4.15 Amps or less
  • The power supply is not overloaded (see power supply capacity chart in product installation guide or
  • There are no shorts in the secondary wiring
  • All secondary connections are RED-TO-RED and BLACK-TO-BLACK

SloanLED products carry a limited warranty.
For complete details refer to the warranty policy found at SloanLED.comSloanLED 100L1 24 VDC Power Supply - iconWasu ko duk samfuran da aka nuna ana rufe su da alamun Amurka da na ƙasashen waje waɗanda ke jiran kuma an rufe su da ɗaya daga cikin waɗannan samfuran Amurka masu zuwa:
6776504, 6969179, 7192157, 6932495, 7241031

SloanLED 100L1 24 VDC Power Supply - logoSabis na abokin ciniki da goyan bayan fasaha
Hedikwatar SloanLED
5725 Olivas Park Drive, Ventura, CA, Amurka
888.747.4LED (888.747.4533) • [email kariya]
P/N 402794 Rev A 2021-03-24
SloanLED Turai bv
Argonstraat 110, 2718 SN Zoetermeer, NL
+ 31 88 12 44 900 • [email kariya]

Takardu / Albarkatu

SloanLED 100L1 24 VDC Samar da Wutar Lantarki [pdf] Jagoran Shigarwa
701895-100L1, 100L1 24 VDC Samar da Wutar Lantarki, 100L1, 24 VDC Samar da Wuta

Bar Tsokaci

Your email address ba za a buga.