http://qr.w69b.com/g/oxXBz3mRq
Saukewa: B08F7ZV8VM
JAGORAN FARA GANGAN
Haɗa NutraMilk (Cigaba)
- A hankali daidaita yankan ruwa tare da tsakiyar wurin tushe kuma latsa da ƙarfi don shigarwa.
GARGADI: HAZARAR LACERATION Riƙe ruwa a hankali; yana da kaifi sosai. Tabbatar an cire naúrar kafin shigarwa ko cire ruwa. - Sanya ruwan goge goge a cikin tace ciki.
- Sauya murfin kuma karkatar da shi ta agogon hannu don kulle shi.
- Ƙananan hannu don kulle cikin saman murfin.
- Toshe igiyar wutar lantarki cikin mashin bangon bango. Koma zuwa littafin mai amfani don umarnin ƙasa.
- Danna maɓallin wuta a bayan na'urar. LCD karantawa zai nuna "00".
Me ke cikin Akwatin?
Haɗa NutraMilk
- Saita tushe a kan ƙasa mai faɗi tare da karkatar da hannu sama daga tushe.
- Sanya kwandon hadawa a tsakiyar tushe tare da rami mai spigot zuwa gaba (1).
- Karkatar da kwandon shara don kulle wuri (2).
- Saka wuyan spigot ɗin a cikin rami a gaban kwandon hadawa har sai ya danna wuri (3).
- Juya murfi akan agogo baya don buɗewa da cirewa.
- Saka tace na ciki a cikin kwandon hadawa kuma a tsakiya shi cikin matsayi.
Yin Madadin Man shanu
- Ƙara sinadaran.
- Koma zuwa Manual mai amfani ko girke-girke
Littattafai don shawarar ma'aunin kayan masarufi.
- Danna maɓallin BUTTER, sannan maɓallin START/STOP don fara zagayowar man shanu.
- Koma zuwa Jagorar mai amfani ko Littafin girke-girke don shawarwarin lokutan sarrafawa don nau'ikan abubuwa daban-daban.
Yin Madarar Madarar
- Man shanu da sinadaran ku bin umarnin da ke sama.
- Ƙara har zuwa lita 2 na ruwa da zarar aikin man shanu ya cika.
Lura: Yi amfani da ruwan sanyi kawai lokacin yin madadin madara. Kada ku yi amfani da ruwan zafi a cikin NutraMilk ɗinku ko kuna iya lalata injin ku!
- Danna maɓallin MIX, sannan maɓallin START/STOP don fara yin madadin madara.
- Lokacin da madadin madara ya shirya don sha, danna maɓallin rarrabawa, sannan maɓallin START/STOP don ba da madarar. Bude spigot don watsawa cikin wani akwati.
- Sanya madadin madara a cikin akwati da aka rufe har zuwa kwanaki 5-6.
Tsaftace NutraMilk
- Tsaftace wajen tushe da hannun da aka haɗe tare da tallaamp, Tufafi mai laushi.
- Warke da tsaftace kwanduna, ruwan wukake, da ruwan goge goge tare da kayan wanke-wanke sannan a kurkura sosai da ruwa KO a wanke a cikin injin wanki (an bada shawarar saman tudu).
- Yi amfani da goge goge mai gogewa don tsaftace ragar karfe akan tace ciki.
- Kada a yi amfani da masu tsabtace abrasive.
- Bayan tsaftacewa, bushe duk abubuwan da aka gyara sosai kafin ajiya.
GARGADI: Kar a taɓa nutsar da tushe cikin ruwa ko wasu ruwaye.
GARGADI: Koyaushe cire kayan aikin kafin tsaftacewa.
Shirya matsala
- Idan LCD ya nuna “Er” lokacin da aka danna kowane maɓallin aiki, ba a haɗa abubuwan da aka haɗa daidai ba. Cire naúrar kuma sake haɗa kayan aikinta.
Abubuwan da za a bincika:
– Tabbatar an kulle kwandon da aka haɗe a wuri.
– Tabbatar cewa murfin ya kulle gabaɗaya ta hanyar juya shi gefe don buɗewa sannan kuma kusa da agogo don rufewa da kulle.
– Tare da kulle murfi, tabbatar da cewa an kulle hannu a cikin murfi amintacce. Idan kayan aikin wiper ɗin bai yi layi ba lokacin da aka rage hannun zuwa wurin, sake jujjuya ruwan gogewar kwata da hannu da ƙananan hannu. - Koma zuwa littafin mai amfani don ƙarin shawarwarin warware matsala.
510 W. Central Ave, Ste. B, Brea, CA 92821, Amurka | www.thenutramilk.com
waya: 1-714-332-0002 | imel: info@thenutramilk.com
Takardu / Albarkatu
 | NutraMilk B08F7ZV8VM Nut Processor [pdf] Jagorar mai amfani B08F7ZV8VM Mai sarrafa Kwaya, B08F7ZV8VM, Mai sarrafa Kwaya, Mai sarrafawa |
