MEAN WELL NPB-450 Series 450W High Reliable Ultra Wide Output Range Intelligent Battery Charger User Manual

MEAN WELL Logo

NPB-450 Series

Features

  • Patented auto ranging with ultra-wide charging voltage (10.5~21V,21~42V,42~80V, 54~100V; Please refer to page 8 for setting)
  • Ka'idar CANBus da aka gina a ciki don sarrafawa, saiti da saka idanu
  • Shirye-shirye 2/3 stage da caji mai lankwasa ta hanyar SBP-001
  • Saitin hannu don 2/3 stage da 4 ginannun na'urorin caji ta hanyar DIP SW
  • Kariya da yawa:
    Short circuit / Over voltage / Over temperature/ Battery under voltage/ Battery reverse polarity (No damage)
  • Caja OK da cikakken siginar baturi
  • Ayyukan ramuwa na zafin jiki don tsawaita rayuwar batir (Lead-acid kawai)
  • -30°C~+70°C wide operating temperature
  • Mai sarrafa zafi na DC fan don rage amo
  • Ikon KYAUTA / Kashewa
  • Smart programmer available (Order NO.: SBP-001, sold separately)
  • Ɗaukar kayan haɗi akwai (Order NO.: DS-Carry Hand, sayarwa daban)
  • Bi 62368-1 + 60335-1/-2-29 takaddun shaida biyu
  • Ya dace da gubar-acid (Pb) da baturan li-ion
  • 3 shekaru garanti

Aikace-aikace

  • AGV
  • E-Bike, E-Scooter, Campmota, Bus, Motoci na musamman
  • Robotic lawn mower
  • Wanke mutum-mutumi
  • Sana'ar nishaɗi, Jirgin ruwa na sirri ko jirgin ruwan aiki
  • Tsarin sa ido
  • Tashar tashar sadarwa
  • Maganin madadin tsarin rediyo
  • Equipments or instruments with backup battery

description

NPB-450 ƙaramin ɗan ƙaramin ƙarfi ne, mai jujjuyawa, kuma mai fa'ida sosai.tage intelligent charger. It utilizes a fully digital control design with patented automatic battery voltage fasahar ganowa, tare da mahimman fasali guda biyar da suka haɗa da haziƙanci, ƙwararru, abokantaka mai amfani, aminci, da m. Jerin suna da samfura huɗu tare da fitarwa voltage ranges of 10.5~21V, 21~42V, 42~80V, and 54~100V respectively. The charging voltage kewayon kowane samfuri ya isa ya rufe nau'in nau'in nau'in nau'in volttages da sinadarai na baturi, kuma akwai ginanniyar ingantacciyar voltage yanayin cajin ganowa (Lura an saita wannan yanayin zuwa KASHE ta tsohowar masana'anta kuma ya dace da baturan lithium tare da BMS kawai). NPB-450 na iya haɗawa tare da MEAN WELL's SBP-001 mai tsara shirye-shirye don daidaitawar dijital, kamar zaɓi 2/3 stage caji, daidaita caji voltage/na yanzu, kuma saita lokacin sake zagayowar caji don kare rayuwar baturi. Ta hanyar mai amfani DIP SW a gaban panel, mai amfani kuma na iya daidaita 2/3 s kai tsayetage caji, halin yanzu (50 ~ 100%), kuma zaɓi tsakanin nau'ikan caja guda 4 da aka saita. Bugu da kari, an gina ka'idar sadarwa ta CANBus don saduwa da aikace-aikacen ƙwararru, wanda ke ba da damar sarrafa nesa da saka idanu kan matsayin caja. Dangane da aminci, yana da ganowa na hankali don ingantaccen voltage and connection as well as protection from reverse polarity. It passes ITE IC/EN/UL62368-1 and household appliances EN60335-1/-2-29 dual safety and 3-year warranty to guarantee reliable operation. The NPB-450 is truly an intelligent, safe, and reliable universal charger with outstanding cost performance.

Samfurin Samfuri

Musammantawa

Musammantawa

Musammantawa ya ci gaba

Tsarin zane

PFC fosc : 80KHz
PWM fosc : 60KHz

Tsarin zane

Kullin Ragewa

Kullin RagewaDerating Curve Continued

Halayen tsaye

Halayen tsaye

Littafin Aiki

1. Saitin hannu

Saitin jagora

1.1 2 or 3-stage selectable via DIP S.W on panel

2 or 3-stage selectable via DIP S-W on panel

1.2 Charging curve can be adjustable via DIP S.W on panel

Charging curve can be adjustable via DIP S-W on panel

  • The default curve is programmable, whereas other pre-defined curves can be activated by the means of the DIP S.W; This series provides 2 or 3 stage charging curve please refer to the table below and the Mechanical Specification.

Charging curve can be adjustable via DIP S-W on panel continued

2. Programmable charging curve

Charging Curve can be set via SBP-001 with computer

mataki 1

Kayan aiki na kayan aiki

Kayan aiki na kayan aiki

mataki 2

Connect to software for setting

Connect to software for setting

Connect to software for setting continued

Bayanin Aiki:

SBP-001 is a programmer, particularly for MEAN WELL’s various programmable battery charger models to program the parameters of charging curves, such as the 2 or 3 stage selectable, Constant current (CC), tapper current(TC), Constant voltage (CV), float voltage (FV),Charging time out and so on, to accommodate the diversified battery specification in industry. With the design accounting for simplicity and convenience, users can easily configure MEAN WELL’s programmable battery chargers with SBP-001 programmer and the computer; all of the setups are able to be finished easily by the means of the specific software.
Note:(1) Tapper current(TC) default is 10%, can be fine tuned from 2% to 30% by SBP-001 with computer or CANBus Interface.
(2) Please contact MEAN WELL for more details.

※ Software Interface:

Interface Software

3. Auto Ranging for Charging (Default non-Auto ranging)

※ Function Description:

a. NPB-450 has built-in auto ranging mode.
(Note this mode is set to OFF by factory default and is suitable for lithium batteries with BMS only)

b. When operating in auto ranging mode , NPB-450 will automatically detect the voltage of battery that is connected and adjust charging voltage accordingly. It will not start charging unit appropriate battery voltage an gano.

c. While under auto ranging mode, NPB-450’s built-in MCU will adjust charging voltage. There is no potentiometer for voltage adjustment on the front panel.

d. While under auto ranging mode, the charging current can be adjusted between 50~100%. (The charging current can not be adjusted via potentiometer while not operating in auto ranging mode)

※ When using the auto ranging charging curve function, please pay attention to the following:

Input-Output Side

  1. Default factory setting is OFF via DC output side DIP S.W, Follow steps A1~A6 below to enable the setting.
  2. Auto ranging function should use together with Lithium batteries and BMS (Battery Management System).
  3. Do not exceed the output voltage and current ranges as specified in the NPB-450 specifications (please refer to page 2).

※ Auto Ranging function by DIP S.W Setting

Auto Ranging function by DIP SW Setting

※ Back to non-auto ranging as following:

Non-auto ranging

4. Auto Derating function

※ Covered by over temperature protection, auto de-rating function works under operation either in charging curve (2 or 3 stage) or under control by communication protocol(CANBus).

T1(Typ.): Maximum ambient temperature of 100% output current.
T2(Typ.): T1+5℃.

Auto Derating function

5. CANBus communication interface

CANBus 2.0B version, Can control, setting and monitoring that including output charging voltage, output charging current, internal temperature and DC output ON/OFF……and so on, please refer to the jagorar mai amfani don ƙarin bayani.

CANBus communication interface

CANBus communication interface continued

6. Charger OK Signal

Charger OK signal is a TTL level signal.
The maximum sourcing current is 10mA.

Charger OK Signal

7. Battery Full Signal

Battery full signal is a TTL level signal.
The maximum sourcing current is 10mA.

Battery Full Signal

8. Ikon ON-KASHE mai nisa

The NPB-450 can be turned ON/OFF by using the “Remote Control” function.

M ON-KASHE Control

※ The charger is shipped, by factory default, with Remote ON-OFF(pin 7) and +12Vaux (pin 8) shorted by connector.

Remote ON-OFF Control continued

9. Temperature compensation (3 stage kawai)

Temperature compensation function to prolong battery life for lead-acid batteries. Temperature compensation range is 0 ~ 40℃.
The battery temperature sensor comes along with the charger can be connected to the unit to allow temperature compensation of the charging voltage.
If the sensor is not used, the charger works normally.

Diyya na zazzabi

10. DC Output Side LED Indicators & Corresponding Signal at Function Pins

DC Output Side LED Indicators

Sanarwa ta injina

※ Intelligent Battery Charger model

Intelligent Battery Charger model

※ DIP S.W

DIP SW

※ Control Pin No. Assignment : HRS DF11-14DS or equivalent

Control Pin No Assignment

※ LED Status Table

Tebur Halin LED

※ Connector Pin No. Assignment : HRS DF11-14DS or equivalent

Connector Pin No Assignment

Aikin Pin

Note1: Non-isolated signal, referenced to [GND(signal)].
Note2: Isolated signal, referenced to GND-AUX

Jerin kayan aiki

※ NTC Sensor and Remote Control mating along with NPB-450 (Standard accessory)

Jerin kayan aiki

※ Carry handle (Optional accessory, battery charger and pull handle should be ordered seperately)

Accessory List Continued 1

Accessory List Continued 2

Shigarwa Ɗauki

Da fatan za a koma zuwa: http://www.meanwell.com/manual.html

Takardu / Albarkatu

MEAN WELL NPB-450 Series 450W High Reliable Ultra Wide Output Range Intelligent Battery Charger [pdf] Jagoran Jagora
NPB-450 Series, 450W High Reliable Ultra Wide Output Range Intelligent Battery Charger, NPB-450 Series 450W High Reliable Ultra Wide Output Range Intelligent Battery Charger

References

Bar Tsokaci

Your email address ba za a buga. Da ake bukata filayen suna alama *