KYAU KYAU PWM-120 120W Constant Voltage PWM Fitarwa LED Jagorar Umarnin Jagora

Jerin PWM-120 shine direban 120W AC / DC LED wanda ke nuna madaidaicin voltage yanayin tare da fitowar salon PWM, wanda ke da ikon kula da zafin launi da daidaituwar haske yayin tuki kowane nau'in
LED tsiri. PWM-120 yana aiki daga 90 ~ 305VAC kuma yana ba da samfura tare da ƙididdiga daban-dabantage jeri tsakanin 12V da 48V. Godiya ga babban inganci har zuwa 90.5%, tare da ƙira mara kyau, duk jerin suna iya aiki don -40 ° C ~ + 90 °C yanayin zafin jiki a ƙarƙashin iskar iska kyauta. Dukkanin jerin an ƙididdige su tare da matakin kariya na ingress IP67 kuma ya dace da yin aiki don bushe, damp ko jikakkun wurare. PWM-120 sanye take da aikin dimming wanda ya bambanta da aikin sake zagayowar na fitarwa, samar da babban sassauci ga LED tube aikace-aikace.

Samfurin Samfuri

Nau'in	Matsayin IP	Aiki	Lura
Blank	IP67	3 a cikin 1 dimming aiki (0 ~ 1 0Vdc, 1 0V PWM siginar da juriya)	A hannun jari
DA	IP67	DALI sarrafa technoloQy.(na nau'in 12V/24V DA kawai)	A hannun jari
DA2	IP67	Fasaha sarrafa DALL-2.(don 12V/24V tare da nau'in DA2 kawai)	A hannun jari

BAYANI

MISALI		Saukewa: PWM-120-12 0		Saukewa: PWM-120-24	0	Saukewa: PWM-120-36	0	Saukewa: PWM-120-48 D
FITARWA	DC VOLTAGE	12V		24V		36V		48V
	KYAUTA YANZU	10 A		5A		3.4 A		2.5 A
	KYAUTA WUTA	120W		120W		122.4W		120W
	MAGANAR DIMMING	0 ~ 100%
	PWM FREQUENCY (Nau'in.)	1.47kHz don Blank/DA-Nau'in, 2.5kHz don DA2-Nau'in
	SETUP, TASHI LOKACI t::	500ms, 80ms/230VAC ko 115VAC
	RIKE LOKACI (Nau'i)	16ms/230VAC ko 115VAC
INPUT	VOLTAGE RANGE bayanin kula.3	90 ~ 305VAC 127 ~ 431VDC (Da fatan za a koma ga sashin "SATIC CHARACTIC")
	MAFARKI YAWA	47 ~ 63 Hz
	FACTOR WUTA (Nau'in.)	PF>0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC@cikakken kaya Da fatan za a koma zuwa sashin "WUTA FACTOR (PF) HALI")
	JAM'IYYAR RUDANA JARUWA	THO< 20% (@Ioad 60%/115VAC, 230VAC; @load 75%/277VAC)
	INGANTATTU (Nau'i)	88.5%		90%		90%		90.5%
	AC CURRENT (Nau'i)	1.3A/ 115VAC	0.65A / 230VAC		0.55A/ 277VAC
	INGANTA KYAUTA (Nau'in.)	SANYI START 60A (tashi = 520µs da aka auna a 50% Ipeak) a 230VAC; Ta NEMA 410
	MAX. A'A. PSUs akan 16A MAI KIRA	Raka'a 4 (mai katsewar kewayawa na nau'in B) / raka'a 6 (mai katsewar nau'in C) a 230VAC
	LEAKAGE YANZU	<0.25mA/277VAC
	BABU KYAUTA/TSIRA CIN WUTA	Babu amfani da wutar lantarki <0.5w don nau'in blank; yawan wutar lantarki <0 .5W don nau'in DA-nau'in/ nau'in DA2
KARIYA	KYAUTA	108 ~ 130% ƙididdige ƙarfin fitarwa
		Yanayin ɓarna, yana murmurewa ta atomatik bayan an cire yanayin kuskure
	TAKAITACCEN GARI	Yanayin 12V/24V da yanayin rufe 36V/48V (gami da nau'in DA/sai dai nau'in DA2) Yanayin Hiccup, yana murmurewa ta atomatik bayan an cire yanayin kuskure (kawai don nau'in DA2)
	AKAN VOLTAGE	15 ~ 17V		28 ~ 34V		41 ~ 46V		54 ~ 60V
		Kashe o/p voltage, sake kunna wuta don murmurewa
	WUCE ZAFIN	Kashe o/p voltage , sake kunnawa don murmurewa
Muhalli	WURIN AIKI.	Tcase = -40 ~ +90°C (Da fatan za a koma zuwa sashin "OUTPUT LOAD vs TEMPERATURE")
	MAX. GASKIYAR CASE.	Tcase=+90°C
	DANSHI MAI AIKI	20 ~ 95% RH marasa amfani
	MATSALAR ARZIKI., HUMIDIT'I	-40 ~ + 80 ° C, 10 ~ 95% RH
	GASKIYA GASKIYA	±0.03%/°C (0 ~ 45°C,sai 0 ~ 40°C na 12V)
	VIBRATION	10 ~ 50GHz, 5G 12min./1cycle, tsawon minti 72. kowane tare da X, Y, Z axes
TSIRA & EMC	MATSALOLIN TSIRA LAFIYA.5	UL8750 (nau'in "HL") (sai dai nau'in 12DA), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN/EN61347-2-13 .62384 yarda; Zane yana nufin BS EN/EN67-15885; Dangane da BS EN/EN120-12-24 shafi J dace da shigarwar gaggawa
	DALI STANDARDS	IEC62386-101, 102,207,251 don DA/DA2-Nau'i kawai, Nau'in Na'ura 6(DT6)
	KARANTA VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA: 1.5KVAC
	JUMU'A KEBE	I/PO/P:1QOM Ohms/500VDC/25°C/70% RH
	Bayanin EMC EMISSION.6	Yarda da BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load 60%); BS EN/EN61000-3-3,GB17743 da GB17625 .1,EAC TP TC 020
	EMC LAYYA	Yarda da BS EN/EN61000-4-2,3 ,4,5,6,8,11; TS EN 6154 7, matakin masana'antar haske (Layin rigakafi-Layin 2KV), EAC TPTC 020
WASU	Farashin MTBF	860.4K awa min. Telcordia SR-332 (Bellcore); 228.7K awa min. MIL-HDBK-217F (25 ° C)
	GIRMA	1916337.5mm (LWH)
	CIKI	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
NOTE	Duk sigogin da BA a ambata musamman ana auna su a shigarwar 230VAC, ƙididdigewa na yanzu da 25 ″ C na yanayin zafi. Ana iya buƙatar rage ƙima a ƙarƙashin ƙaramin shigar da ƙaratage. Da fatan za a koma zuwa sassan “SATAKIYYA” don cikakkun bayanai. Ana auna tsawon lokacin saitawa a farkon sanyi na farko. Kunna/KASHE direban na iya haifar da ƙara lokacin saitawa Ana ɗaukar direba a matsayin ɓangaren da za a yi aiki tare da kayan aiki na ƙarshe. Tun da cikakken shigarwa zai shafi aikin EMC, masana'antun kayan aiki na ƙarshe dole ne su sake cancantar umarnin EMC akan cikakken shigarwa kuma. Wannan jerin ya dace da yanayin rayuwa na yau da kullun na> 50,000 hours na aiki lokacin da Tease, musamman @) aya (ko TMP, kowane DLC), yana kusan 75 ° C ko ƙasa da haka. Da fatan za a koma zuwa bayanin garanti akan MEAN WELL's websaiti a http://www.meanwell.com Matsakaicin yanayin zafin jiki na 3.5°C/1000m tare da ƙirar maras amfani da na 5°C/1000m tare da ƙirar fan don aiki sama da 2000m(6500ft). Don kowane bayanin kula na aikace-aikacen da taka tsantsan shigar aikin tabbatar da ruwa na IP, da fatan za a duba littafin mai amfani kafin amfani. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Dangane da ikon IEC 62386-101/102 DALI akan ƙa'idodin lokaci da katsewa, lokacin saitawa yana buƙatar gwadawa tare da mai sarrafa DALI wanda zai iya tallafawa ikon DALI akan aiki, in ba haka ba lokacin saitawa zai kasance sama da 0.5 seconds don nau'in DA. . * Rarraba Laifin Samfur: Don cikakkun bayanai, da fatan za a duba https://www.meanwell.com/serviceDisclaimer.aspx

AIKIN DIMMING

* Ka'idar dimming don fitowar salon PWM

Ana samun dimming ta hanyar canza yanayin aiki na halin yanzu.

* 3 cikin 1 aikin dimming (na nau'in Blank)

Aiwatar da ɗayan hanyoyin uku tsakanin DIM+ da DIM -: 0 – 1 OVDC, ko 10V PWM sigina ko juriya.

Dimming tushen halin yanzu daga wutar lantarki: 1 OOμA (nau'i)

Ana amfani da ƙari O-1 OVDC

Aiwatar da siginar 10V PWM ƙari (kewayon mitar 100Hz-3KHz):

Aiwatar da ƙari juriya:

Lura:

Min. Zagayowar aikin fitarwa na yanzu shine kusan 0.15%, kuma shigarwar dimming shine kusan 6KO ko 0.6VDC, ko siginar 10V PWM tare da sake zagayowar aikin 6%.
Zagayowar aikin fitarwa na yanzu zai iya faɗuwa zuwa 0% lokacin shigar da dimming ƙasa da 6KO ko ƙasa da 0.6VDC, ko siginar 1 0V PWM tare da sake zagayowar aiki ƙasa da 6%.

* Interface DALI (bangaren farko; don DA/DA2-Nau'in)

Aiwatar da siginar DALI tsakanin DA+ da DA-.
Ka'idar DALI ta ƙunshi ƙungiyoyi 16 da adireshi 64.
Mataki na farko yana daidaita a 0.2% na fitarwa

KYAUTA KYAUTA vs TEMPERATURE

SIFFOFIN SIFFOFI

※ Ana buƙatar rage ƙima a ƙarƙashin ƙaramin shigar da ƙaratage.

HALAYEN WUTA (PF).

※ Tcase a 80 ℃

TOTAL HARMONIC rarrabuwa (THD)

Model 48V Model, Tcase a 80 ℃

INGANTATTU vs LOAD

Jerin PWM-120 yana da ingantaccen aiki wanda har zuwa 90.5% ana iya kaiwa ga aikace-aikacen filin.
Model 48V Model, Tcase a 80 ℃

LOKACIN RAYUWA

Tsarin zane

Ƙayyadaddun Makanikai

Nau'in Blank

DA/DA2-Type

Ba da shawarar Hanyar Jagora

Manual shigarwa

Haɗin don nau'in Blank

Tsanaki

Kafin fara kowane shigarwa ko aikin kulawa, da fatan za a cire haɗin wutar lantarki daga mai amfani. Tabbatar cewa ba za a iya sake haɗa shi da gangan ba!
Ajiye iskar da ya dace a kusa da naúrar kuma kar a tara kowane abu a kai. Hakanan dole ne a kiyaye izinin 10-15 cm lokacin da na'urar da ke kusa ta kasance tushen zafi.
Hanyoyi masu hawa ban da daidaitaccen daidaitawa ko aiki a ƙarƙashin babban zafin yanayi na iya ƙara yawan zafin jiki na ɓangaren ciki kuma zai buƙaci rage ƙima a cikin fitarwa na halin yanzu.

Ƙimar halin yanzu na kebul na firamare/secondary da aka yarda ya kamata ya fi ko daidai da na naúrar. Da fatan za a duba ƙayyadaddun sa.
Don direbobin LED masu haɗin haɗin ruwa, tabbatar da cewa haɗin gwiwa tsakanin naúrar da na'urar hasken wuta yana da ƙarfi ta yadda ruwa ba zai iya kutsawa cikin tsarin ba.
Don masu tuƙin LED masu ƙarfi, tabbatar cewa mai sarrafa dimming ɗin ku yana da ikon tuƙi waɗannan raka'a. Jerin PWM yana buƙatar 0.15mA kowace raka'a.

Tc max. an gano a kan alamar samfurin. Da fatan za a tabbatar cewa zafin yanayin Tc ba zai wuce iyaka ba.
KADA KA haɗa "DIM- zuwa -V".
Ya dace da amfani na cikin gida ko waje ba tare da hasken rana kai tsaye ba. Da fatan za a guji nutsewa cikin ruwa sama da mintuna 30.

Ana ɗaukar wutar lantarki a matsayin ɓangaren da za a yi aiki tare da kayan aiki na ƙarshe. Tun da cikakken shigarwa zai shafi aikin EMC, masana'antun kayan aiki na ƙarshe dole ne su sake cancantar umarnin EMC akan cikakkiyar shigarwa kuma.

Takardu / Albarkatu

KYAU KYAU PWM-120 120W Constant Voltage PWM Output LED Driver [pdf] Jagoran Jagora
PWM-120, 120W Constant Voltage PWM Fitar LED Direba, PWM Fitar LED Direba, 120W Constant Voltage Direban LED, Direban LED, Direba

Magana

Manual mai amfani

Siffofin

Aikace-aikace

Bayani