Dual Mode Multimedia Keyboard Touchpad Combo K06 Installation & User Manual

System Requirements

• HID compatible device
• Terminal with USB port
• Windows 2000
• Windows XP
• Windows Vista, Windows CE, Windows 7, Windows 8
• Bluetooth: Windows 8 or more
• Linux (Debian-3, Redhat-9.0, Ubuntu-810, Fedora-7.0 tested)

Descriptions

The Rii K06 is a dual-mode multimedia keyboard with an integrated touchpad. It features a standard QWERTY layout, function keys with multimedia controls, a touchpad for cursor control, and dedicated left and right mouse buttons.

Key Features:

• Touchpad: Located on the right side for cursor navigation.
• Power Switch: Located on the side of the device.
• Charging Port: For recharging the internal battery.
• Pairing Button: Used for Bluetooth pairing.

Specifications

• Transmission mode: Bluetooth + (RF) 2.4GHz wireless technology
• Bluetooth version: Bluetooth 5.0
• Power supply: 400mAh
• Charging voltage: 5V
• Charging current: 300mA
• Sleeping current: 12uA
• Operation voltage: 3.7V
• Operating current: 50mA
• Product weight: 98g
• Product size: 151*59*11mm

Bluetooth Installation

1. Press the Fn + Tab keys to switch to Bluetooth mode. A blue LED will stay on, indicating the keyboard has paired with your device.
2. To pair a Bluetooth device, long press Fn + Pairing for one second and wait for the blue light to flash rapidly.

2.4G Installation

1. Take the USB receiver out of the box.
2. Plug the USB receiver into your device's USB port.
3. Press the Fn + Caps keys to switch to 2.4G mode. The green indicator light will turn on to indicate a successful connection.

How to make IR programming

1. Aim the Rii Remote IR LED at your remote's IR LED, ensuring alignment. The recommended distance is no more than 3cm.
2. Long press the Rii Remote button until the LED Indicator Circle keeps lighting, indicating the Rii Remote is in IR learning state.
3. Press your remote button once. If the LED Indicator Circle flashes twice and turns off, the IR learning process is finished.
4. Repeat steps 2-3 to learn all desired keys.

Note

If the Green LED does not stay on and keeps flashing, it means the keyboard was not paired with your device. To pair, follow these steps:

1. Switch to 2.4G mode; the Green LED should light up.
2. Long press Fn + Pairing for one second; the Green LED will flash rapidly.
3. Plug in the USB dongle. The flashing Green LED will become solid once paired successfully within 60 seconds. If it fails, repeat steps 1-2. Ensure the keyboard is fully charged before pairing.

LED Indicator

• Blue/Green LED: Blue light indicates Bluetooth mode, while green light indicates 2.4G mode. If the keyboard is not connected, the indicator light flashes slowly.
• Red LED: Indicates charging status. It is on when charging and off after fully charged.
• Yellow LED: Flashes when the battery power is low.
• White LED: Caps Lock indicator.

Signal Interference

When working with Android TV boxes or smart TVs, large monitor devices may cause signal interference, resulting in a shorter effective range and unresponsive buttons. To resolve this, try moving the USB receiver from the back of your device to the front USB port and re-pairing the keyboard.

Shortcut Keys

The keyboard includes various shortcut keys for multimedia control, system functions, and mode switching. Refer to the diagram for specific key functions, including:

• Media controls (Play/Pause, Next, Previous, Volume)
• System functions (Home, Search, Email, Calculator, Lock screen)
• Mode switching (Bluetooth, 2.4G)
• Other functions (Printscreen, Delete, Task Manager, DPI adjustment)

Auto Sleep Mode

This keyboard features an auto sleep/wake-up function. If there is no operation for 5 minutes, it will automatically enter sleep mode. Press any button to wake it up. Ensure the device has sufficient power.

The keyboard supports auto sleep and wake-up. Without operation for approximately 3 minutes, the keyboard will enter sleep mode. In sleep status, all LED indicators are off. Pressing any key can wake it up.

Switching off the keyboard after use

After use, push the switch to the OFF position. The USB receiver does not need to be pulled out from the terminal; it can be used next time directly.

Charging the battery

The device uses a built-in lithium-ion battery. Use only approved USB cables and chargers. Fully charge the unit before initial operation. The device can be used while charging, but charging time will be extended. A blinking low-voltage light warns the user of low battery. The unit will automatically turn off if the battery is depleted.

Scroll wheel function

The touchpad roller function allows for two-finger up and down sliding on the touchpad to perform scrolling actions, similar to a mouse scroll wheel.

Backlit

The Backlit LED automatically turns on for one second after the keyboard is powered on. When the backlight is lit, it will stay on for 1 minute. If there is no operation after 1 minute, the backlight LED will turn off automatically.

Touchpad

The touchpad can be used in a horizontal or vertical position. To switch between horizontal or vertical mode, hold the Fn key and press the "? /" key.

Warning

• The attached USB cable is for charging only and cannot be used for data transfer.
• When charging is complete, unplug the charging cable.
• Do not attempt to open or repair this product yourself.
• Keep this device away from liquids, such as water.

Maintenance

• Do not attempt to disassemble the device or replace the rechargeable battery yourself.
• The battery will discharge when stored for a long time without operation.
• Use the specified charger. Disconnect the device when the battery is fully charged.
• Overcharging will shorten the battery life.

Disposal

Always dispose of the used appliance at a recycling center. Do not dispose of the used appliance with household waste.

Note

Due to 2.4G wave technology, the connection may be subject to interference from obstacles like walls, metals, or other electronic devices. Keep the space between the keyboard and USB receiver clear of obstructions. The manufacturer reserves the right to amend specifications without prior notification. Illustrations in the user manual are for reference only; please operate according to the actual design.