Setting Up Your Mouse and Keyboard

Step 1: Ready to go? Remove pull-tabs.

Remove the pull-tabs from POP Mouse and the back of POP Keys and they will automatically switch on.

Step 2: Pair POP Keys

Long press (about 3 seconds) the Channel 1 Easy-Switch key to enter Pairing Mode. The LED on the keycap will start blinking.

Step 3: Pair POP Mouse

Press the button on the bottom of your mouse for 3 seconds. The LED light will start blinking.

Step 4: Connect POP Keys

Open Bluetooth preferences on your computer, phone, or tablet. Select "Logi POP" on the list of devices. You should see a PIN code appear on screen. Type that PIN code out on your POP Keys then press the Return or Enter key to finish connecting.

Note: Each PIN code is randomly generated. Make sure you enter the one shown on your device.

When using the Bluetooth connection (Windows/macOS), your POP Keys' layout will automatically adapt to the settings on your connected device.

Step 5: Connect POP Mouse

Simply search for your Logi POP Mouse on your device's Bluetooth menu. Select, and you're connected.

Alternative Way to Connect

Bluetooth not your thing? Try Logi Bolt. Alternatively, you can easily connect both devices using the Logi Bolt USB receiver, which you'll find in your POP Keys box. Follow simple Logi Bolt pairing instructions on Logitech Software (which you can download in a flash at logitech.com/pop-download).

Multi-Device Setup

Step 1: Want to pair with another device?

Easy. Long press (3-ish seconds) the Channel 2 Easy-Switch Key. When the keycap LED starts blinking, your POP Keys is ready to pair to a second device via Bluetooth. Pair to a third device by repeating the same thing, this time using the Channel 3 Easy-Switch Key.

Step 2: Tap between devices

Simply tap the Easy-Switch keys (Channel 1, 2, or 3) to move between devices as you type.

Step 3: Select a specific OS Layout for your POP Keys

To switch to other OS keyboard layouts, long press the following combinations for 3 seconds:

• FN and "P" keys for Windows/Android
• FN and "O" keys for macOS
• FN and "I" keys for iOS

When the LED on the corresponding channel key lights up, your OS has been successfully changed.

How to Customize Your Emoji Keys

Step 1: Download Logitech Software to get started

Ready to get playful with your emoji keys? Download Logitech Software from logitech.com/pop-download and follow the easy installation instructions. Once the software is installed, your emoji keys are good to go.

Emojis are currently supported on Windows and macOS only.

Step 2: How to swap out your emoji keycaps

To remove an emoji keycap, firmly grip it and pull it vertically. You'll see a little '+' shaped stem beneath. Choose the emoji keycap you want on your keyboard instead, align it with that little '+' shape, and press down firmly.

Step 3: Open Logitech software

Open Logitech Software (making sure your POP Keys is connected) and select the key you want to reassign.

Step 4: Activate the new emoji

Select your favorite emoji from the suggested list, and get your personality popping in chats with friends!

How to Customize Your POP Mouse

Step 1: Download Logitech Software

After installing Logitech Software at logitech.com/pop-download, explore our software and customize the top button of POP Mouse to any shortcut you like.

Step 2: Change your shortcut across apps

You can even customize your POP Mouse to be app-specific! Just play around and make it your own.