GTPLAYER loog

GTPLAYER EU-GT505-KD Gaming Chair

GTPLAYER EU-GT505-KD Gaming Chair

Details of accessoriesGTPLAYER EU-GT505-KD Gaming Chair 1

Instructions Before Using

  1. Place the chair base upside down. Insert the tip of the part G) into 62 and fix with M6*20 Screws.GTPLAYER EU-GT505-KD Gaming Chair 2
  2. Insert the casters into the bottom of the base. Install gas lift and insert gas lift cover.GTPLAYER EU-GT505-KD Gaming Chair 3
  3. Install the mechanism and armrests.GTPLAYER EU-GT505-KD Gaming Chair 4
  4. Place the seat on the gas liftGTPLAYER EU-GT505-KD Gaming Chair 5
  5. Align f&m with the holes of seat, then tighten the screws.GTPLAYER EU-GT505-KD Gaming Chair 6
  6. Align f&m with the holes of back, then tighten all screwsGTPLAYER EU-GT505-KD Gaming Chair 7
  7. Put M5*8 screw through the hole of & 2 and tighten, then put the cap on.GTPLAYER EU-GT505-KD Gaming Chair 8
  8. Install &with M5*8 screw, then put the cap on.GTPLAYER EU-GT505-KD Gaming Chair 9
  9. Attach the headrest & lumbar pillow.GTPLAYER EU-GT505-KD Gaming Chair 10

Frequently Asked Questions:

  • Q:Why do I hear a creaking sound after using it for a period of time?
    • A: The mechanism may not fit the seat base. If you hear a creaking sound, please remove the mechanism and reassemble again. Please ensure all the screws are securely tightened.

Assembly Instruction

  • Place the chair base upside down. Insert the tip of the part J1 into J2 and fix with M6*20 screws.
  • Insert the casters into the bottom of the base. Install gas lift and insert gas lift cover.
  • Install the mechanism, armrests and footrest connector.
  • Place the seat on the gas lift.
  • Alignf &m with the holes of seat, then tighten the screws.(Attention: Screw 50% tight)
  • Alignf &m with the holes of back, then tighten the screws. (Attention: Tighten all the screws completely until them are fixed in the  Correct position.)
  • Put M58 screw through the hole of R1&R1 and tighten, then put the cap on.
  •  Put M5* 8 screw through the hole of L1& L2 and tighten, then put the cap on.
  • Attach the headrest & lumbar pillow.GTPLAYER EU-GT505-KD Gaming Chair 11

PackageGTPLAYER EU-GT505-KD Gaming Chair 12 contents

Functions

  • Lift up the button on the side of the arm to adjust the arm height, raise or lower to the desired position.
  • Lift the handle to recline and release it to any desired position. Rest on the backrest when resetting back to its normal position, otherwise, the backrest may rebound rapidly.
  • Pull upward on lever to achieve height adjustment. (2) Push into the lock, and pull out to unlock the tilt of the chair.
  • Adjust the tilt angle with the tilt-tension knob underneath the seat. Turn it clockwise to decrease the angle, and counterclockwise to increase the angle.
  • Lift up the button on the side of the arm to adjust the arm height, raise A or lower to the desired position.
  • Lift the handle to recline and release it to any desired position. Rest on Bthe backrest when resetting back to its normal position, otherwise, the backrest may rebound rapidly.
  • Pull upward on lever to achieve height Height Adjustment adjustment.
  • Push in to lock, pull out to unlock the tilt of the chair. 2 Tilt Function
  • Adjust the tilt angle with the tilt-tension knob underneath the seat. Turn it clockwise to decrease the angle, and counterclockwise to increase the angle.

Documents / Resources

GTPLAYER EU-GT505-KD Gaming Chair [pdf] Instruction Manual
EU-GT505-KD, Gaming Chair, EU-GT505-KD Gaming Chair

Leave a comment

Your email address will not be published.