Product Information
The MV 001800 is a product that requires wiring installation for its usage. It includes a push button with the label “PROTACT XXX” and an LED unit that can be firmly clipped onto a plate with a thickness range of 0.5-6.0mm. The product also includes a sealing unit for inserting the wiring.
Product Usage Instructions
- Strip the wire by 7mm.
- Insert the wire into the sealing unit.
- Unlock the wire using the provided tool.
- Transform/transmit the wire to the desired location.
- Attach the LED unit to the plate by firmly clipping it.
- Example circuit: Connect multiple push buttons together for a combination of pushes.
- Note: No sealing unit is required for step 8.
- Important: Ensure that the LED unit is fixed properly in place.
- Connect the wired LED push button for usage.
Product Specifications
- Model: MV 001800
- Wiring: Requires wiring installation
- Push button: PROTACT XXX
- LED unit: Included, with clip attachment
- Plate thickness range: 0.5-6.0mm
- LED illumination: Yes
Installation Instructions
Grothe GmbH
Tel.: (0 22 42) 88 90-0 * Fax: -36
Internet: www.grothe.de
Documents / Resources
 | GROTHE PROTACT XXX Push Button Taster [pdf] User Guide PROTACT XXX Push Button Taster, Push Button Taster, Button Taster |
