Govee RGBIC LED Strip Lights User Manual
Govee RGBIC LED Strip Lights

At a Glance

Strip Lights

2

Power Adapter

1

User Manual

1

Service Card

1

Specifications

Length

2x5m/2×16.4ft

Lighting Color

RGBIC

Waterproof

No

Control Method

App & Control Box

Power Supply

Adapter 12V

Installing Your Strip Lights

Preparation Before Installing
  1. Unpack the box and check all items listed in the packing list.
  2. Plug the adapter into the power outlet to check whether the lights turn on.
Installing Steps 
  1. Wipe the surface to make sure it’s clean and dry.
    Installing Strip Lights Steps
  2. Peel off the protective film on the tape, stick the strip on and press over it firmly.
    Installing Strip Lights Steps
  3. Reinforce via clips around corners.
    Installing Strip Lights Steps
  4. Connect the power brick to the strip and the adapter. Peel off the protective film on the tape to stick it on.
    Installing Strip Lights Steps
  5. Power on the strip lights and begin using.
    Installing Strip Lights Steps

Controlling with the Control Box

Controlling with the Control Box Inductions

Button

Function

On/Off Turn the light on/off.
Color Changing Press to cycle through 9 colors.
Music Mode/ Brightness Adjusting Press to enter music mode.

Press and hold to cycle through the 6 brightness levels.

Downloading the Govee Home App

Download the Govee Home app from App Store (iOS devices) or Google Play (Android devices).

Notice: You need a smartphone running iOS 9.3 (or above) or Android 4.4 (or above).

Downloading the Govee Home App
Downloading the Govee Home App
Downloading the Govee Home App

Connecting the Strip Lights to the App

  1. Turn on Bluetooth in your mobile phone;
  2. Open Govee Home app and tap “+” icon in the top right corner;
  3. Select “H6126” in the device list;

Troubleshooting

  1. The adhesive tape is not strong enough.
    • Make sure the installation surface is clean and dry.
    • Firmly press over the strip after sticking.
    • Reinforce the installation via more clips and tapes.
  2. The control box doesn’t work.
    Re-plug in the adapter port and try again.
  3. Cannot connect to Bluetooth.
    • Do not skip Bluetooth connection in the app.
    • Make sure Bluetooth in your mobile phone has been turned on.
    • It may be caused by incompatibility between the phone system and the app. Please change a mobile phone and connect again.
    • Re-power on the strip and re-turn on Bluetooth in your phone to try again.
    • Keep the distance between the strip and the phone less than 1m/3.28ft while connecting.
    • Keep obstructions between the strip and the phone as few as possible.
  4. The strip doesn’t match the same color./Some lamp beads don’t light up.
    Please contact Govee support team in time for return.
  5. he strip lights don’t work.
    • Pull out every connective part of the strip lights and firmly re-connect them.
    • Tap On/Off button on the control box or app to check whether it is a strip quality issue.
  6. Cannot sync to the music beat.
    • Please keep the control box close to the sound source.
    • Clean up the sound picking hole on the control box.

Customer Service

Customer Service Icons Warranty: 12-Month Limited Warranty
Customer Service IconsSupport: Lifetime Technical Support

Customer Service IconsEmail: [email protected]
Customer Service IconsOfficial Website: www.govee.com

Customer Service Icons

 

Documents / Resources

Govee RGBIC LED Strip Lights [pdf] User Manual
RGBIC LED Strip Lights, H6126

References

Leave a comment

Your email address will not be published.