Gorilla Gadgets Wall Mount Thermometer User Guide

WMT5
User Guide

Introduction

Specification

1. Accuracy: ± 0.2 degrees ( 93~113 ºF, place it in the operating environment for 30 minutes before use)
2. Abnormal automatic alarm: flashing+”Di Di” sound
3. Automatic measurement: measuring distance 2 in~4 in
4. Screen: Digital display
5. Charging method:USB charging or battery(18650 Li-ion).
6. Install method: nail hook(optional), double-sided adhesive sticking, bracket fixing(optional)
7. Environment temperature: 50°~ 104°F (Recommended 60°F ~ 95°F )
8. Infrared measuring range:32~122 F
9. Response time: 0.5s
10. Input: DC 5V
11. Net weight: 350g
12. Dimension: 170* 115* 140mm
13. Standby: About one week
14. Counting capacity: 999

Status Description

1. Standby: The red dot on the bottom of the display lights up in turn. (Fig.1)
2. Insufficient power: The horizontal bar lights up in the middle of the display. (Fig. 2)
3. Normal temperature: Flashing green lights and alarm “Di”.(Fig. 3)
   
4. Abnormal temperature: Flashing red lights and alarm “DiDi”. (Fig 4)
5. Default
   “Lo”: Ultra-low temperature alarm. (Fig. 5)
   “HI”: Ultra-high temperature alarm. (Fig.6)
   

Operation Instruction

1. Temperature measurement: Place your forehead 2 – 4 inches away from the sensor. (Fig 7)
   
2. Mode switching: There is a small hole on the back of the device(Fig. 8). You can use a 3mm diameter screwdriver to insert it into the hole and then press the button.
   (1) Temperature unit: Press ‘mode switch hole’ then select”C” or “F” (Fig.9, 10) C: Celsius
   F: Fahrenheit
   
3. install and replace the battery
   (1) Remove three screws on the back of the thermometer
   (2) Open the back base and install 18650 Li-battery
   
4. install method
   

How to connect and use Bluetooth

Step 1: Download the app by scanning the QR code

https://itunes.apple.com/cn/app/id1517342680?mt=8

http://fir.leijiaxq.top/3wrn?utm_source=fir&utm_medium=qr

Step 2: After downloading the app. You will be prompted to enter your name

Step 3:Click the icon on the top right corner to connect your device to the thermometer

Step 4: Click on to see temperature measurement from the thermometer in real-time

Step 5: Click on to add mutiple profiles 8 Step 6: Click on (Body. temperature alarm setting” to set a number for temperature at or past which alarm will go off
Step 7: Click on to see the trend of temperature during different hours of the day

Step 8: Click on to see ihe history of en) temperature data for multiple dates and times

www.gorillagadgets.com