Gorilla Gadgets

Gorilla Gadgets Wall Mount Thermometer Installation Manual

Gorilla Gadgets Wall Mount Thermometer

WMT5

1. Introduction

FIG 1 Introduction

FIG 2 Introduction

 

2. Specification

  1. Accuracy: +0.2 degrees ( 93–113°F, place it in the operating environment for 30 minutes before use)
  2. Abnormal automatic alarm: flashing+”Di Di” sound
  3. Automatic measurement: measuring distance 2 in 4 in
  4. Screen: Digital display
  5. Charging method: USB charging or battery(18650 Li-ion).
  6. Install method: nail hook(optional), double-sided adhesive sticking, bracket fixing (optional)
  7. Environment temperature: 50°~ 104 °F (Recommended 60°F ~ 95°F )
  8. Infrared measuring range: 32~122°F
  9. Response time: 0.55
  10. Input: DC 5V
  11. Net weight: 350g
  12. Dimension: 170* 115* 140mm
  13. Standby: About one week
  14. Counting capacity: 999

 

3. Status Description

  1. Standby: The red dot on the bottom of the display lights up in turn.(Fig. 1)
  2. Insufficient power: The horizontal bar lights up in the middle of the display. (Fig. 2)
  3. Normal temperature: Flashing green lights and alarm “Di”.(Fig. 3)   FIG 3 Status Description
  4. Abnormal temperature: Flashing red lights and alarm “DiDi”. (Fig 4)
  5. Default
    “Lo”: Ultra-low temperature alarm. (Fig. 5)
    “HI”: Ultra-high temperature alarm. (Fig.6)

FIG 4 Status Description

 

4. Operation Instruction

  1. Temperature measurement: Place your forehead 2 – 4 inches away from the sensor. (Fig 7)  FIG 5 Operation Instruction
  2. Mode switching: There is a small hole on the back of the device(Fig. 8). You can use a 3mm diameter screwdriver to insert it into the hole and then press the button.                    (1) Temperature unit: Press ‘mode switch hole’ then select”C” or “F” (Fig. 9, 10) C: Celsius F: Fahrenheit

FIG 6 Operation Instruction

3. Install and replace the battery

  1. Remove three screws on the back of the thermometer
  2. Open the back base and install 18650 Li battery

FIG 7 Install and replace the battery

FIG 8 Install method

 

How to connect and use Bluetooth

Step 1: Download the app by scanning the QR code

FIG 9 Dowload the app by scanning the QR code

FIG 10 How to connect and use Bluetooth

FIG 11 How to connect and use Bluetooth

FIG 12 How to connect and use Bluetooth

www.gorillagadgets.com

 

Read More About This Manual & Download PDF:

Ask a question

Your email address will not be published.