Manual de usuario Preguntas e respostasResposta
01 de agosto de 2025 - 06:32
To change the setpoints on the KE2 Temp + Valve controller, siga estes pasos:
1. Access Setpoint mode by pressing and holding the "Enter" button until "Control Type (CtL)" displays on the screen.
2. Use the up and down arrow buttons to advance through the available setpoints.
3. Press the "Enter" button to view a configuración actual.
4. Press the up or down arrow buttons to change the setpoint value.
5. Press and hold the "Enter" button to confirm each setpoint change.
6. Press the "Back" button to escape and return to normal operation.
Remember to refer to the complete instructions provided in the guía de usuario for detailed information on each setpoint and its range.
Engadir novo comentario