Pinolino logoPinolino 110032 Cot Bed FlorianPinolino 110032 Cot Bed Florian product



Estimados clientes,
We are glad that you have chosen this premium product. We, the Pinolino staff, have manufactured this item with greatest care. The materials that were used are eco-friendly and comply with the strict European safety standards.
Para aforrarche esforzos innecesarios, lea atentamente primeiro as instrucións de montaxe. Comproba se tes todas as pezas e estuda atentamente as ilustracións antes de comezar a montaxe. O manexo ou a montaxe inadecuados e especialmente as alteracións na construción anularán todas as reclamacións de garantía.
Removable bars:
One of the bedsides has three removable bars, which can be detached. To pull out the removable bars, first push them upwards and then take them out on a side. Mounting is done in reverse order. To avoid impermissible opening dimensions, all removable bars must be removed when a removable bar is removed.

Requisitos de seguridade

Please check regularly that the screws are well tightened. The screws can loosen, leading to snag points or objects getting caught. The mattress support has three height positions. Please make sure that the mattress support is set in the right position, so that the child will not fall. The lowest position is the safest position. As soon as the child can sit up, the mattress base should only be used in this position.
Please use only the enclosed hex key and a screwdriver for the assembly. To avoid damaging the product, do not use an electric screwdriver for tightening the screws!

Ten en conta:
Use only original accessories and spare parts from the producer or from the providers. Plastic bags and other plastic elements / wrappings should be removed immediately and kept out of the reach of children!

Instrucións de montaxe
Please set the parts on an even, flat surface. Make sure that the article isn’t inclined.
We recommend using the packaging of the article as underlay in order to protect it and its bottom side.

Do not use the cot if single parts are missing, broken or torn. Use only original spare parts recommended by Pinolino.
To prevent the child from falling out, the cot should no longer be used if the child is able to climb out of the cot.

Objects that can serve as footholds, or ones that present the hazard of suffocation or strangling, e.g. laces, drapery or curtain chords etc., must not be left inside the cot.
The mattress must be chosen so that the depth of the cot (mattress upper surface to top edge of the bed frame) will be at least 50 cm in the lowest position of the mattress support and at least 20 cm in its highest position. The mattress size should be 140 cm x 70 cm, or at least 139 cm x 68 cm. The maximum thickness of the mattress for this bed must be 10 cm.Pinolino 110032 Cot Bed Florian fig 1aviso
Nunca use máis dun colchón no berce.

The size of mattress must ensure that the gap between the mattress and the side ends is no more than 30 mm, however the mattress is positioned.

Make sure that the bed is not in the close proximity of open fires or strong heat sources, e.g. electric heaters, gas stoves.
Conserve o plan de montaxe e a chave hexagonal para desmontaxes ou montaxes futuras.


Limpe cun pano limpo e húmido. Tamén atopar detalles sobre

What else you should know
Na fabricación dos nosos mobles e xoguetes só utilizamos materiais, aceites, vernices e esmaltes que non supoñan perigo para a saúde e sexan adecuados para o mobiliario infantil. Como resultado do proceso de produción, os mobles novos ás veces poden conservar un cheiro específico. Para contrarrestar este inconveniente inofensivo, recomendamos ventilar repetidamente.Pinolino 110032 Cot Bed Florian fig 2


We wish you much joy with your Pinolino cot.
Fabricado por:
Kinderträume GmbH
Sprakeler Str. 397
D-48159 Münster
Fax +49-(0)251-23929-88


Pinolino 110032 Cot Bed Florian [pdf] Manual de instrucións
110032, Cot Bed Florian, 110032 Cot Bed Florian


Deixe un comentario

Enderezo de correo electrónico non será publicado. Os campos obrigatorios están marcados *