Documento

OWLLON TNS-0117 Dobe Wireless Gamepad para Nintendo Switch Pro Controller Manual de usuario
Gamepad inalámbrico Dobe OWLLON TNS-0117 para controlador Nintendo Switch Pro

Introdución á produción:

This controller is of Bluetooth wireless type, which is mainly used with N-S console. The aisle light of the controller is assigned through the console. This product is available in motor vibration and sensor functions, and it supports the connection to PC console via USB so as to achieve PC XINPUT function

Diagrama do produto:

Diagrama do produto
Diagrama do produto

Diagrama de funcións:

Nome da función Is there a function? Observacións
Conexión por cable USB si  
Conexión Bluetooth apoio  
modo de conexión N-S PC mode  
Six-axis gravity induction si  
Unha clave si  
tecla B si  
tecla X si  
tecla Y si  
- clave si  
+ tecla si  
L key si  
Tecla R si  
ZL key si  
ZR key si  
Tecla de inicio si  
Print Screen key function si  
Joystick 3D (función de joystick 3D esquerda) si  
Tecla L3 (función da tecla de pulsación do joystick 3D esquerdo) si  
R3 key (right 3D joystick press key function) si  
Cross key function si  
TUBRO speed regulation function si  
Connecting indicators si  
Motor vibration intensity adjustment si  
Actualización do controlador apoio  

Mode and Pairing Instruction:

  • 1. N-S wired connection mode:
    1. Before use the wired connection, please confirm the N-S console system: “set up” -> “controller and inductor” -> “wired connection of Pro controller” in “on” state.
    2. The controller is connected to the N-S base via USB cable so as to be used as the wired controller, and the corresponding indicator light of the controller will flash slowly; when you plug out the USB cable, the controller turns into wireless mode and connect the console automatically!
  • 2. N-S wireless connection mode:
    1. Before use the wireless connection, please confirm that the N-S console system turns to: “controller” -> “ change grip/order” in pairing state.
    2. Long press the code key of the controller for 3 seconds to enter into Bluetooth search mode, and the LED indicator light will flash in marquee type.
      The corresponding channel indicator light will be on after successful connection.
  • 3. PC-360, PC mode:
    Firstly, please download the PC 360 to Windows computer. After the PC 360 is installed, the controller should be connected to the computer via USB cable, and the corresponding channel indicator light will be on after successful connection. The LED2 and LED3 will be on when the No.1 and No.10 keys are pressed simultaneously to switch to PC mode.
  • 4. Back connection and shutdown instruction:
    1. Short press the Bluetooth code key to shutdown the controller.
    2. Press Home to wake up the controller. The awakened controller will automatically back connect the console which has been paired previously; it will switch to auto sleep if the back connection is not successful within 8 seconds.

Indicación de carga e características de carga:

During the charging of the controller: the charging LED indicator light will be on, and it will be off after the controller is fully charged.

Suspensión automática:

  • Connect N-S mode: the N-S console screen is off or shut down, and the controller automatically disconnects and switch to sleep mode.
  • Bluetooth connection mode: the Bluetooth disconnects and switches to sleep mode after the Bluetooth code key is pressed shortly.
  • Without any keys pressed within 5 min, it will switch to auto sleep mode (including gravitational induction immobility). Remarks: there is no auto sleep currently

TURBO Function Settings:

  • Configuración da función TURBO semiautomática: prema a tecla TURBO e, a continuación, configúraa como tecla de función TURBO segundo sexa necesario, entón pode completar a configuración con éxito.
  • Full-automatic TURBO function setting: press TURBO key and then press the key which has been set up with the semi-automatic TURBO function.
  • Keys available for TURBO function settings: A key, B key, X key, Y key, + key, – key, L key, R key, ZL key, ZR key, “cross” key (up, down, left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
  • Borrar as teclas de función TURBO que foron configuradas:
    • Clear TURBO function of single key: press TURBO key + key set up with TURBO function for quick clear.
    • Shut down the automatic firing function: you should short press the – key and down arrow key once, and the controller will vibrate once to execute the command, then the automatic firing function of all keys will be turned off.
  • Regulation methods of automatic firing speed:
    • A. Increase automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been up regulated by one gear successfully.
    • B. Reduce automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been down regulated by one gear successfully.
    • C. The automatic firing function is memorable. If the console is connected after the controller is disconnected, the automatic firing speed set up previously can be memorized.

Motor Vibration Regulation:

3 gears in total: weak, intermediate and strong (the changed amplitude is 40%, 70% and 100%) regulation methods:

  • Lowest gear (40% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Intermediate gear (70% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Top gear (100% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • The intermediate gear of controller vibration is acquiescently connected for the first time, i.e. 70% amplititude.

Función de conexión USB:

  • The wired N-S and PC XINPUT mode connection is supported.
  • It is automatically identified as N-S mode when connected to N-S console.
  • It is in XINPUT mode when connected to PC.

Parámetros eléctricos:

Elemento Valor de referencia
Vol. De traballotage DC 3.6-4.2V
corrente de traballo 24mA
Corrente de sono 22.5uA
Corrente de vibración 82 mA~130 mA
Potencia de entrada DC 4.5~5.5V/400mA
A capacidade da batería 500mAh
Distancia de funcionamento 10m

3D Joystick Instruction:

  • The 3D joystick is not required to be calibrated manually on N-S console. The 3D joystick will be calibrated automatically when the N-S console is plugged.
  • If the 3D joystick drips during use, please replug and unplug the controller before use. Be careful not to touch the 3D joystick when you plug and unplug the controller.

Gyroscope Calibration Instruction:

Enter into the “N-S console setting – controller and inductor – calibration of gyroscope inductor” for controller test and calibration; place the controller horizontally on the desktop and long press + or – for calibration.

Controller Upgrade Instruction:

  • If this product cannot be used due to system compatibility and other reasons, please contact the customer service provider to provide program: install the upgrade package to upgrade.
  • Specific operation: plug the controller into the computer first, then press the X+Y+HOME for 3 sec to enter into the upgrade mode; and then open the Program.exe software, click update firmware to upgrade, and wait for the prompt for successful update.

Asuntos que precisan atención:

  • This product should be well kept when not in use.
  • Este produto non se pode usar nin almacenar en ambientes húmidos.
  • Este produto debe utilizarse ou almacenarse evitando po e cargas pesadas para garantir a súa vida útil.
  • Non use o produto que estea empapado, accidentado ou roto e con problemas de rendemento eléctrico causados ​​por un uso inadecuado.
  • Non use equipos de calefacción externos como fornos de microondas para secar.
  • Se está danado, envíeo ao departamento de mantemento para a súa eliminación. Non o desmontes só.
  • Os usuarios nenos deben usar este produto correctamente baixo a orientación dos pais e non ser adicto ao xogo.

FCC Precaución :

Este dispositivo cumpre coa parte 15 das Normas FCC. A operación está suxeita ás dúas condicións seguintes:

  1. Este dispositivo pode non causar interferencias nocivas e
  2. este dispositivo debe aceptar calquera interferencia recibida, incluídas as interferencias que poidan causar un funcionamento non desexado.

Calquera cambio ou modificación non aprobado expresamente pola parte responsable do cumprimento podería anular a autoridade do usuario para operar o equipo.

Nota: Probouse que este equipo cumpre cos límites para un dispositivo dixital de clase B, segundo a parte 15 das normas FCC. Estes límites están deseñados para proporcionar unha protección razoable contra interferencias nocivas nunha instalación residencial.
Este equipo xera usos e pode irradiar enerxía de radiofrecuencia e, se non se instala e usa de acordo coas instrucións, pode causar interferencias nocivas nas comunicacións por radio. Non obstante, non hai garantía de que non se produzan interferencias nunha instalación concreta. Se este equipo causa interferencias nocivas na recepción de radio ou televisión, que se pode determinar apagando e acendendo o equipo, anímase ao usuario a intentar corrixir a interferencia mediante unha ou varias das seguintes medidas:

  • Reorientar ou recolocar a antena receptora.
  • Aumenta a separación entre o equipo e o receptor.
  • Conecte o equipo a unha toma dun circuíto diferente ao que está conectado o receptor.
  • Consulte co distribuidor ou cun técnico de radio / TV experimentado para obter axuda.

O dispositivo foi avaliado para cumprir os requisitos xerais de exposición a RF. O dispositivo pódese usar en condicións de exposición portátil sen restricións.

Documentos/Recursos

Gamepad inalámbrico Dobe OWLLON TNS-0117 para controlador Nintendo Switch Pro [pdf] Manual de usuario
TNS-0117, TNS0117, 2AJJCTNS-0117, 2AJJCTNS0117, TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller, TNS-0117, Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Deixe un comentario

Enderezo de correo electrónico non será publicado.