Micron Electronics Prime LS100 LTE Tracker

introdución

Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency. Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol.
The WIFI function will be activated and report the MAC addresses once the device is in alerting state. The BLE function will be activated and scan the third-party BLE data or Beacon broadcast by custom setting or protocol.
RF 433MHz is used as a supervised short range RF communication link between the unit and the Base Station to determine if they are no longer in range with each other.

Produto rematadoview

Aparencia

Buttons Interface Description

Button /USB Interface Description

KEY/interface

descrición

Restablecer clave Power off     the Prime LS100
adaptador Connected to a Power supply socket can power on Prime LS100
Tecla de función Modo SOS
Feature Key Play to do list audios.
TEST Key Modo de proba
Descrición LED


Imaxe 1-2

There are 3 LED lights in Prime LS100 device, the description as following.

Luz evento estado
Function Key LED Function Key pressed Solid when pressed
Feature Key LED Feature Key pressed Solid when pressed
Test Key LED Test Key pressed Solid when pressed
Breath Light Test Key long press Breath effect

Primeiros pasos

Lista de Pezas

nome

fotografía

Observación

Prime LS100 Base Station The LTE Base Station.
Prime LS100 adapter It used to power on the Prime LS100.
Batería incorporada

The following items are suggestion for built-in battery usage, please pay more attention.

  • The device is Emergency call equipment, which is designed to be used by adapter always plugged.
  • There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged.

Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.

Prime LS100 Adapter

Prime LS100 base station is connected with an AC Adapter.
The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).

Acendido / apagado


Imaxe 2-2

conectar: Plug in the power adapter and power on.
Apagado: Unplugged the power adapter and press the Reset button.

Nota: the user can not power off Prime LS100 if the adapter is plugged.

frecuencia

LTE: Band2/Band4/Band5/Band12/Band13
WIFI::2412MHz-2462MHz
BLE:2412MHz-2472MHz
433:433.92MHZ

Trouble shooting and Safety info

Solución de problemas

Desorde

Posible razón

solución

Messages can’t be reported to the backend server by Mobile network. APN is wrong. Some APN can not visit the internet directly. Pídelle ao operador de rede o APN correcto.
O enderezo IP ou o porto do servidor backend é incorrecto. Asegúrate de que o enderezo IP do servidor backend sexa un enderezo identificado en Internet.
Unable to power off Prime LS100. The function of power key was disabled by AT+GTFKS. Enable the function of power key by AT+GTFKS.
Non se pode cargar a batería The battery has not been used for too long time and has been locked. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help.
Información de seguridade

The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime LS100 on the airplane or near medical equipment.

FCC Precaución.

§ 15.19 Requisitos de etiquetaxe.
Este dispositivo cumpre coa parte 15 das Normas FCC. A operación está suxeita á condición de que este dispositivo non cause interferencias nocivas.

§ 15.21 Información ao usuario.
Calquera cambio ou modificación non aprobado expresamente pola parte responsable do cumprimento podería anular a autoridade do usuario para operar o equipo.

§ 15.105 Información ao usuario.
Nota: comprobouse que este equipo cumpre cos límites para un dispositivo dixital de clase B, segundo a parte 15 das normas FCC. Estes límites están deseñados para proporcionar unha protección razoable contra interferencias nocivas nunha instalación residencial. Este equipo xera usos e pode irradiar enerxía de radiofrecuencia e, se non se instala e usa de acordo coas instrucións, pode causar interferencias nocivas nas comunicacións por radio. Non obstante, non hai garantía de que non se produzan interferencias nunha instalación concreta. Se este equipo causa interferencias nocivas na recepción de radio ou televisión, que se pode determinar apagando e acendendo o equipo, anímase ao usuario a tratar de corrixir a interferencia mediante unha ou varias das seguintes medidas:
-Reorientar ou recolocar a antena receptora.
-Aumentar a separación entre o equipo e o receptor.
-Conecta o equipo a unha toma de corrente dun circuíto diferente ao que está conectado o receptor.
-Consulte ao distribuidor ou a un técnico de radio / TV experimentado para obter axuda.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withmin imum distance 20cm between the radiator & your body.

Documentos/Recursos

Micron Electronics Prime LS100 LTE Tracker [pdf] Manual de usuario
BAS4GA, ZKQ-BAS4GA, ZKQBAS4GA, Prime LS100 LTE Tracker, LS100 LTE Tracker, LTE Tracker, Tracker

Deixe un comentario

Enderezo de correo electrónico non será publicado.