Introdución
This manual provides detailed instructions for the safe and efficient use of your Wefomey 65.6ft COB LED Strip Light. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.
Contido do paquete
- 65.6ft warm white COB LED strip (2 rolls of 32.8ft)
- Control remoto RF
- Controlador
- UL Listed DC 24V 48W power supply
- 2-pin 8mm COB LED connectors
- 2-pin 8mm COB LED connector extension wire
- Soportes de montaxe
Instrucións de seguridade importantes
- Asegúrese de que a fonte de alimentación estea desconectada antes da instalación ou mantemento.
- Este produto está deseñado só para uso en interiores.
- Do not expose the LED strip to water or high humidity.
- Use só o adaptador de alimentación proporcionado.
- Do not bend the LED strip sharply or apply excessive force.
- Manter fóra do alcance dos nenos.
Configuración e instalación
Paso 1: prepare a superficie de instalación
Ensure the surface is clean, dry, and smooth for optimal adhesive performance. Remove any dust, grease, or moisture.
Step 2: Connect the Components
Connect the COB LED strip to the controller, and then connect the controller to the DC 24V 48W power supply. Finally, plug the power supply into a standard electrical outlet.
Image: Illustration of how to connect the LED strip to the controller and power supply. The strip is flexible and can be used for various DIY lighting projects.
Step 3: Mount the LED Strip
Peel off the backing from the adhesive tape on the back of the LED strip and firmly press the strip onto the desired surface. For added security, use the included mounting brackets and screws.
Step 4: Cutting and Reconnecting (Optional)
The LED strip can be cut at designated marks (every 50mm / 1.97 inches) to achieve the desired length. The middle of the metal point on the strip light indicates a cutting mark.
To reconnect cut sections, use the provided 2-pin 8mm COB LED connectors. Ensure correct polarity (positive to positive, negative to negative) when making connections.
Image: Detailed instructions on how to use 2-pin 8mm COB LED strip connectors, including opening the cap, inserting the strip, checking orientation, and closing the clip. Examples of L-shaped and T-shaped connections are shown.
Instrucións de funcionamento
Encendido/apagado
Use the ON/OFF button on the RF remote control or the inline controller to turn the lights on or off.
Brillo regulable
The LED strip offers dimmable brightness with 6 levels (10%, 25%, 40%, 60%, 80%, 100%). Use the brightness increase/decrease buttons on the remote or the fixed brightness level buttons (10%, 25%, 50%, 100%).
Image: A remote control is shown adjusting the brightness of the LED strip light, illustrating the 10% to 100% dimming capability in a room with a fireplace.
Modos de iluminación
The remote control provides 3 dynamic lighting modes: Jump, Gradient, and Flicker. Select these modes using the dedicated buttons on the remote.
Función de temporizador
Set the LED strip to automatically turn off after 10, 30, or 60 minutes using the timer buttons on the RF remote.
Image: A bedroom scene showing the LED strip light installed behind a headboard, with a remote control indicating timer settings for 10, 30, and 60 minutes.
Función de memoria
The controller has a memory function that restores the LED strip to its last used setting when powered on.
Emparejamento de control remoto
To pair the remote control (1 to 1 pairing) or cancel pairing: After powering on, press and hold the "Sun" button and the "Moon" button simultaneously for 1-3 seconds until the strip light flashes.
Image: An RF remote control highlighting the "Sun" and "Moon" buttons for pairing, with an example of LED strip lights illuminating the exterior of a house.
Mantemento
- Regularly wipe the LED strip with a soft, dry cloth to remove dust.
- Non use produtos de limpeza ou disolventes abrasivos.
- Asegúrese de que todas as conexións estean seguras.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| As luces non se acenden. | Power supply disconnected, faulty connection, or remote battery low. | Check all power connections. Ensure the power adapter is plugged in. Replace remote battery if necessary. |
| As luces parpadean ou esvaécense inesperadamente. | Loose connection, insufficient power, or faulty strip section. | Check all connections for tightness. Ensure the power supply wattage is adequate for the total strip length. |
| O mando a distancia non responde. | Remote battery low, remote not paired, or obstruction. | Replace remote battery. Re-pair the remote control (refer to "Remote Control Pairing" section). Ensure no obstructions between remote and controller. |
| O adhesivo non se agarra. | Surface not clean or smooth, or strip too heavy for adhesive. | Clean the surface thoroughly before application. Use additional mounting brackets or clips for better support. |
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | WF-WWCOB-20M |
| Marca | Wefomey |
| Cor clara | 3000K Branco Cálido |
| Lonxitude | 65.6 pés (2 rolos de 32.8 pés) |
| Voltage | DC 24 V |
| Wattage | 48 W |
| Tipo de fonte de luz | LED COB |
| CRI | > 90 |
| Regulable | Si |
| Método de control | Control remoto RF |
| Uso interior/exterior | Interior |
| Unidade de corte | 50 mm (1.97 polgadas) |
| Ancho da tira | 8 mm (0.32 polgadas) |
Image: A table summarizing key specifications such as CRI (>90), CCT (3000K), Length (65.6ft/20m), Cutting Size (1.97in/50mm), Power Rated (48W), LEDs Quantity (6480), Width (0.31in/8mm), and Waterproof (IP22).
Garantía e Soporte
Información da garantía
This Wefomey COB LED Strip Light comes with a 2-year manufacturer's warranty.
Atención ao cliente
For technical assistance, troubleshooting, or warranty claims, please contact Wefomey customer support. Refer to the product packaging or the seller's information for contact details.