Banral K-2303-B

Manual de instrucións da lanterna LED magnética recargable de Banral

Model: K-2303-B

Introdución

Welcome to the instruction manual for your Banral Rechargeable Magnetic LED Flashlight. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new flashlight.

The Banral flashlight is a versatile and powerful lighting tool, featuring high lumens, 8 lighting modes, a COB work light, and a strong magnetic base. Its durable aluminum construction and waterproof design make it ideal for various outdoor activities and emergency situations.

Configuración

Battery Installation and Initial Charging

Your Banral flashlight comes with a rechargeable lithium-ion battery. For optimal performance, fully charge the battery before first use.

Instalación de baterías

  1. Desenrosque a tapa da cola da lanterna.
  2. Insert the provided rechargeable battery with the positive (+) pole facing towards the flashlight head. If using 3x AAA batteries (not included), insert them into the provided adapter first, then place the adapter into the flashlight.
  3. Atornille ben a tapa da cola.
Diagram showing battery installation steps

Image: Step-by-step guide for installing the battery, showing the tail cap, battery orientation, and adapter for AAA batteries.

Cargando a lanterna

The flashlight features a built-in Type-C charging port and can also function as a power bank.

  1. Localiza o porto de carga tipo C no corpo da lanterna.
  2. Connect the included USB Type-C cable to the flashlight and to any compatible USB power source (e.g., car charger, power bank, laptop, wall adapter).
  3. The blue power indicator lights will illuminate to show the charging progress (25%-50%-75%-100%). A full charge typically takes approximately 4 hours.
Flashlight connected to a power source via USB-C

Image: The Banral flashlight connected via its Type-C port, demonstrating its charging capability and power display.

Usando como banco de enerxía

To use the flashlight as an emergency power bank, connect your device to the USB-A output port on the flashlight using your device's charging cable.

En funcionamento

Operación básica

The Banral flashlight offers 8 distinct lighting modes and a zoomable focus function.

Encendido/apagado e selección de modo

  1. Press the power button once to turn on the main light.
  2. Subsequent presses will cycle through the main light modes: High, Low, Strobe, SOS.
  3. Double-click the power button to activate the COB side light mode. Subsequent double-clicks will cycle through COB modes: COB High, COB Low, COB Red Light, COB Red Light SOS.
  4. To turn off the flashlight from any mode, long-press the power button for 3 seconds.
Diagram showing 8 lighting modes and power button functions

Image: Visual representation of the 8 lighting modes (High, Low, Strobe, SOS, COB High, COB Low, COB Red Light, COB Red Light SOS) and instructions for single-click, double-click, and long-press actions on the power button.

Foco con zoom

Adjust the light beam by pushing or pulling the head of the flashlight:

  • Pushing the head forward: Narrows the beam for a long-distance spotlight.
  • Pulling the head backward: Widens the beam for a large-area floodlight.
Flashlight demonstrating zoom in and zoom out functions

Image: Illustration of the flashlight's adjustable focus, showing how to zoom in for a spotlight and zoom out for a floodlight.

Magnetic Base and COB Sidelight

The strong magnetic base at the tail of the flashlight allows it to be attached to metal surfaces, providing hands-free illumination. The COB sidelight offers broad area lighting, perfect for work or camping.

Flashlight attached to a metal surface using its magnetic base, with COB light active

Image: The flashlight demonstrating its magnetic base functionality, attached to a car hood, and showing the wide illumination from the COB sidelight in a camping tenda.

Indicador de nivel de batería

The blue LED lights on the flashlight body indicate the remaining battery charge:

  • 4 luces: 100% - 75%
  • 3 luces: 75% - 50%
  • 2 luces: 50% - 25%
  • 1 luz: Below 25% (recharge recommended)
Battery indicator lights on the flashlight

Image: Close-up of the flashlight's power display, showing four blue indicator lights representing battery levels.

Mantemento

Coidados e almacenamento

To ensure the longevity and optimal performance of your Banral flashlight, follow these maintenance guidelines:

  • Limpeza: Limpe o corpo da lanterna cun pano suave eamp pano. Non use produtos de limpeza ou disolventes abrasivos.
  • Lubricación: Periodically apply a thin layer of silicone grease to the O-rings and threads to maintain waterproof integrity and smooth operation.
  • Coidado da batería: If storing the flashlight for an extended period, remove the battery to prevent leakage. Recharge the battery every 3-6 months to maintain its health.
  • Almacenamento: Garda a lanterna nun lugar fresco e seco lonxe da luz solar directa e de temperaturas extremas.

Resolución de problemas

Problemas comúns e solucións

ProblemaCausa posibleSolución
A lanterna non se acendeBatería baixaRecarga a batería.
A lanterna non se acendeA batería inseriuse incorrectamenteCheck battery orientation (positive pole towards head).
A lanterna non se acendeLoose tail cap/headAsegúrese de que todas as pezas estean ben axustadas.
A luz é tenue ou parpadeaBatería baixaRecarga a batería.
A luz é tenue ou parpadeaContactos suciosClean battery contacts and flashlight terminals with a clean cloth.
Entrada de augaDamaged O-ring or loose partsCheck O-rings for damage and ensure all parts are tightly sealed. Apply silicone grease to O-rings.

Se o problema persiste despois de intentar estas solucións, póñase en contacto co servizo de atención ao cliente.

Especificacións

Detalles técnicos

  • Marca: Banral
  • Modelo: K-2303-B
  • Características especiais: High Power Long Range LED Flashlight, Super Bright LED Magnetic Flashlight, TYPE-C Rechargeable, 8 Light Modes, Zoomable Adjustable Focus, Weather & Shock Resistant, IPX5 Waterproof, Non Slip Grip
  • Cor: Negro
  • Fonte de enerxía: Battery Powered (Rechargeable Lithium-ion, 5000mAh capacity)
  • Tipo de fonte de luz: LED (Upgraded Long Beam LED Chip)
  • Material: Aluminio de calidade aeronáutica
  • Brillo branco: 100000 lúmenes
  • Compoñentes incluídos: Cordón, cable USB
  • Dimensións do produto: 1.7" D x 1.3" W x 6.9" H
  • Voltage: 3.7 voltios
  • Distancia da traxectoria da luz: 3280 pés
  • Tempo de execución: Up to 12 hours (at low mode)
  • Nivel de resistencia á auga: Impermeable IPX5
  • Durabilidade: Drop-Resistant, Shock-Resistant, Frost-Resistant
  • Requisitos da batería: 2 A batteries required (included) or 3x AAA batteries (not included)

Garantía e soporte

Garantía do produto

Banral provides a 12-month free replacement warranty for products to ensure customer satisfaction.

Atención ao cliente

For any questions, concerns, or technical assistance, please contact Banral customer support through the Amazon platform or visit the official Banral store.

Visit the Banral Store on Amazon

Representantes de atención ao cliente con auriculares

Image: Customer support team ready to assist.