Renkforce WS-WN575A3 Dual Band AC1200 Wi-Fi Repeater User Manual

1. Introdución

Thank you for choosing the Renkforce WS-WN575A3 Dual Band AC1200 Wi-Fi Repeater. This device is designed to extend the range of your existing Wi-Fi network, ensuring optimal reception and high data transfer rates across your home or office. Equipped with advanced external Omni-directional antennas, it provides wide Wi-Fi coverage, eliminating dead zones. Its exclusive firmware with progressive setup simplifies installation, and easy setup is also available via a simple press of the WPS button.

2. Información de seguridade

• Lea atentamente todas as instrucións antes de usar o dispositivo.
• Non expoñas o dispositivo á auga, á humidade nin a temperaturas extremas.
• Ensure the power outlet is easily accessible and properly grounded.
• Non abra o dispositivo casing. Encomende todo o mantemento a persoal cualificado.
• Manteña o dispositivo lonxe de fontes de calor e da luz solar directa.
• Use only the power supply provided or specified for this device.

3. Contido do paquete

Comprobe o contido do paquete ao desembalar. Se falta algún artigo ou está danado, póñase en contacto co seu vendedor.

• Renkforce WS-WN575A3 Dual Band AC1200 Wi-Fi Repeater
• Cable Ethernet
• Guía de instalación rápida

4. Produto rematadoview

Familiarize yourself with the components of your Renkforce Wi-Fi Repeater.

5. Configuración

5.1. Quick Setup via WPS

1. Plug the Renkforce WS-WN575A3 into a power outlet near your existing Wi-Fi router.
2. Wait for the Power LED to turn solid green.
3. Prema o botón WPS no seu enrutador Wi-Fi existente.
4. Within 2 minutes, press the WPS button on the front of the Renkforce repeater.
5. The Wi-Fi LED on the repeater will flash during the connection process and then turn solid green when successfully connected.
6. Once connected, you can unplug the repeater and move it to a location between your router and the Wi-Fi dead zone. Ensure the Wi-Fi LED remains solid green to confirm a good signal.

5.2. Configuración a través de Web Interface

1. Plug the Renkforce WS-WN575A3 into a power outlet.
2. Connect your computer or mobile device to the repeater's default Wi-Fi network (e.g., "Renkforce_XXXX"). The default SSID and password are usually found on a label on the device.
3. Abrir a web navegador e introduza o enderezo IP predeterminado (por exemplo, http://192.168.10.1) or the default web address (e.g., http://reapeter.net) na barra de enderezos.
4. Inicia sesión co nome de usuario e contrasinal predeterminados (normalmente "admin" para ambos).
5. Follow the on-screen instructions of the setup wizard to select your existing Wi-Fi network and enter its password.
6. You can choose to keep the same SSID for the extended network or create a new one.
7. Save the settings and wait for the repeater to restart.
8. Once restarted, your devices should be able to connect to the extended network.

6. En funcionamento

After successful setup, the Renkforce WS-WN575A3 will automatically extend your Wi-Fi network. Devices within the extended range will connect to the repeater for improved signal strength and coverage.

6.1. Indicadores LED

• LED de alimentación: O verde fixo indica que o dispositivo está acendido.
• LED Wi-Fi: Solid green indicates a successful connection to the main router and active Wi-Fi signal. Flashing indicates data transmission or WPS pairing in progress.
• LED WPS: Flashing during WPS pairing, solid when WPS connection is established.
• LED WAN/LAN: Indica actividade no porto WAN/LAN.
• LED LAN: Indica actividade no porto LAN.

6.2. Conexión por cable

The repeater features two LAN ports. You can connect wired devices such as smart TVs, gaming consoles, or desktop computers to these ports using an Ethernet cable to provide them with network access.

7. Mantemento

• Limpeza: Usa un pano suave e seco para limpar o dispositivo. Non empregues produtos de limpeza líquidos nin en aerosol.
• Actualizacións de firmware: Periodically check the Renkforce support websitio para actualizacións de firmware para garantir un rendemento e unha seguridade óptimos.
• Colocación: For best performance, place the repeater in an open area, away from obstructions like large metal objects, concrete walls, and other electronic devices that may cause interference.

8 Solución de problemas

8.1. Sen poder

• Ensure the repeater is securely plugged into a working power outlet.
• Check if the power switch (if present) is in the ON position.

8.2. Cannot Connect to the Repeater's Wi-Fi

• Verify you are selecting the correct Wi-Fi network (SSID) and entering the correct password.
• Try restarting the repeater by unplugging it and plugging it back in.
• Perform a factory reset if you have forgotten the login credentials or if the device is unresponsive. (See 8.5 Restablecemento de fábrica)

8.3. Sinal deficiente ou velocidade lenta

• Relocate the repeater closer to your main router. The Wi-Fi LED should indicate a strong connection.
• Ensure there are no major obstructions between the repeater and your router, or between the repeater and your devices.
• Comprobe se hai interferencias doutros dispositivos electrónicos (por exemplo, microondas, teléfonos sen fíos).
• Update the firmware of the repeater and your main router.

8.4. Web Interface Not Accessible

• Ensure your device is connected to the repeater's Wi-Fi network or via an Ethernet cable.
• Verify the IP address or web address entered in the browser is correct.
• Borra a caché e as cookies do teu navegador ou proba cun navegador diferente.

8.5. Restablecemento de fábrica

To perform a factory reset, locate the small reset button (often recessed) on the device (refer to Figure 4.4). With the device powered on, use a paperclip or similar pointed object to press and hold the reset button for approximately 5-10 seconds until the LEDs flash. The device will restart with factory default settings.

9. Especificacións

10. Garantía e soporte

This Renkforce product comes with a spare parts availability period of 1 year. For warranty claims, technical support, or further assistance, please contact your retailer or visit the official Renkforce support websitio. Garde o recibo da compra como xustificante da mesma.