Contents hide
1 GL iNet GL-BE3600 Portable Wi-Fi 7 Travel Router Instruction Manual
2 Let’s get started
3 SETTING UP
4 SETTING UP
5 SUPPORT
6 Technical Support
7 TROUBLESHOOTING
8 WARRANTY
9 Documents / Resources
9.1 References

GL iNet GL-BE3600 Portable Wi-Fi 7 Travel Router Instruction Manual
GL iNet GL-BE3600 Portable Wi-Fi 7 Travel Router

Let’s get started

Need help? Scan the QR code for video tutorials and user guide.
QR Code

link.gl-inet.com/be3600-userguide-support

SETTING UP

Method 1: Set Up Your Router Using the Web Admin Panel

Power On
Connect your router to a power supply. Your router will broadcast both 2.4G and 5G Wi-Fi signal with the SSID: GL-BE3600-xxx and GL-BE3600-xxx-5G.
Power On

Connect Your Device to Router

Via Wi-Fi
Use OR Code
Scan the QR code printed on the bottom of the router. Then click. ‘Join’ in the pop-up window to connect.
Connect Your Device to Router

Manual Login
Find and connect to GL-BE3600-xxx on your device then enter the default password printed on the router to join the network.
Connect Your Device to Router
Search the SSID and connect to it
Connect Your Device to Router

Via LAN
Plug the cable connecting to your computer into LAN port.
Connect Your Device to Router

Set Up Router
In a web browser, visit http://192.168.8.1 to set up the router; start by choosing your preferred language.
Set Up Router

SETTING UP

Method 2: Set Up Your Router Using the GL.iNet APP
Scan the QR code or search “glinet” in App store to download and install the APP.
App Store
Google Play
Scan to download
QR Code

https://www.gl-inet.com/app/

Login to your account, choose to add new device and follow in-app instructions to set up

Repair / Reset

  • To repair your network, Press and hold the Reset button, and release the button when the touch screen shows “Release to Repair Mode”.
  • To reset your router to factory settings: Press and hold the Reset button, and release the button when the touch screen shows “Release to Reset Mode”. (Note: This clears all your existing settings.)

SUPPORT

Product Instruction

QR Code

For the first-time setup guide, tutorial videos, and FAQs, please scan the QR code above or visit link.gl-inet.com/be3600-userguide-support.

Technical Support

TROUBLESHOOTING

If you encounter any issues with your router, this troubleshooting guide will help you resolve common problems.

Unable to Access the Router Admin Panel

  • Check if your device has obtained an IP address. If not, try removing and reinserting the Ethernet cable or restarting the network.
  • Set your device to “obtain IP address automatically” and “obtain DNS server address automatically”.
  • If you are connecting via Ethernet, check if the network cable is properly plugged into the router’s LAN port.
  • Make sure you enter http://192.168.8.1 correctly in the web address bar.
  • Try turning the router off and then on again, or perform a restart.

No Internet Access After Setting Up the Router

  • Ensure that the Ethernet cable is securely plugged into the router’s WAN port.
  • Connect your device directly to the upstream device via an Ethernet cable to check if you can access the internet.
  • Ensure your device has obtained an IP address. If using PPPoE dial-up, double-check that your username and password are correct.
  • If the interface indicates “connected, but the network is unavailable,” try removing and reinserting the Ethernet cable or check your upstream device.

Unable to Connect the Router to the GL.iNet App

  • Make sure your GL.iNet App is updated to the latest version.
  • Confirm that your phone is connected to the router’s Wi-Fi network.
  • Make sure the router is fully powered on and has completed its startup, then try scanning again in the App.

Forgot the Admin Panel Password

  • With the router powered on, press and hold the reset button.
  • Release the button when the touch screen displays “Release to Reset Mode”, and wait for the device to restart and the touch screen to return to the initial interface displaying ‘GLiNet. (Note: Reset Mode clears all your existing settings.)
  • After it restarts, log in to the web admin panel (http://192.168.8.1) and reset the router’s password.

Forgot the Wi-Fi Network Password

  • If you haven’t changed the Wi-Fi password, you can find the password on the product label located on the bottom of the router.
  • If you have changed the Wi-Fi password before, connect your device to the router’s web admin panel via an Ethernet cable, then view or modify your Wi-Fi password in the Admin Panel.

WARRANTY

  • We provide two-year limited warranty for routers and 3-month limited warranty for accessories.
  • Extra warranty may apply according to the local law in which the product purchase took place.
  • Any damage to the router caused by not following the instructions will render this warranty null and void.
  • Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void.
  • Issues caused by the use of third-party firmware may not get official support from us.
  • Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void.
  • Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice.

FCC ID: 2AFIW-BE3600

  1. This device complies with Part 15 of the FDC Rules. Operation is subject to the following two conditions:
    1. This device may not cause harmful interference, and
    2. This device must accept any interference received, including interference that may cause undesired operation.
  2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  3. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help important announcement.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:
i. the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries.
Social Mobile Hereby, GL TECHNOLOGIES (HONG KONG) LIMITED declares that the radio equipment type (Dual-band Wi-Fi 7 Travel Router, GL-BE3600] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.grinet.com/products/certificate
Frequency bands: 2.4G WIFI: 2.412-2.472GHz; 5G WIFI:5.15-5.35GHz 5.47-5.85GHz 5.85-5.895GHz,
Maximum output power: 2.4G WiFi 19.87dBm; 5G WiFi 22.64dBm,
Power supply: TYPE-C30D1C, For applicable power supplies see user instructions.
Hong Kong Office
GL. Technologies (Hong Kong) Limited Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong
Shenzhen Office
Shenzhen Guanglianzhitong Tech Co., Ltd. Room 305-306, Skyworth Digital Building, Shiyan Street, Baoan District, Shenzhen, China, 518000 (+86-0755-86606126)

Symbols

GL iNet Logo

Documents / Resources

GL iNet GL-BE3600 Portable Wi-Fi 7 Travel Router [pdf] Instruction Manual
GL-BE3600 Portable Wi-Fi 7 Travel Router, GL-BE3600, Portable Wi-Fi 7 Travel Router, Wi-Fi 7 Travel Router, 7 Travel Router, Travel Router

References

Leave a comment

Your email address will not be published. Required fields are marked *