genie products GHD102 2 Channel AHD CVI TVI CVBS Signal Video Multiplexer User Guide
Please read these instructions carefully before operating the unit and keep for further reference. All the examples and pictures usedhere are for reference only. The contents of this manual are subject to change without notice.
Quick Start Guide 2 Channel AHD / CVI / TVI / CVBS Signal Video Multiplexer Over One Coax
The Genie GHD102 uses FDM compression modulation technology on the transmitter and allows 2 channels of CVI / AHD / TVI / CVBS camera signals to be compressed and converted into a digital signal which is then transmitted using a single coaxial cable.The receiver then decompresses and re-converts the signal back into 2 separate video channels allowing you to connect to a compatible DVR (CVI / TVI / AHD / CVBS) or video matrix. This product automatically adjusts for transmission distances from 0-200 m. The maximum transmission distance supported depends greatly on the quality of the coax cable being used. It supports 2 separate video signals down one coaxial cable by way of Frequency Division Multiplexing (FMD), all data transmission are real-time and all images supported are high definition with minimum delay
Features
- Designed with minimum installation requirement
- 2x separate video channels down 1 coaxial cable
- Real-time images
- Simple Plug and Play operation
- Built-in static protection circuit
- Ideal for utilising existing cables already installed
- Supports coaxial video line 75-3, 75-5, RG59 etc.
- FDM technology is easy for multi-channel signal transmission in 1 coaxial cable with minimum delay and interference
Specifications
| Compatible Mode | AHD / CVI / TVI / CVBS |
| Supported Pixels | TVI : 720p / 1080p / 3MP AHD : 720p / 960p / 1080p CVI : 720p / 960p / 1080p CVBS |
| Interface | BNC Port |
| Power Supply Input | DC12V x2 (Not Supplied) |
| Current Draw | Transmitter = 0.063 Receiver = 0.102 |
| Transmission Distance | 0-200m (Adaptive) |
| Operating Temperature | -30°C – 50°C |
| Material | High quality Aluminium Alloy |
| Dimensions | 64 x 43 x 23 mm |
| Weight | 67.5g (Each) |
Installation Steps
Please check the following items before installation.
If anything is missing, please contact dealer.
- Install in accordance with any local regulations
- Please note that this equipment isn’t waterproof and is designed for indoor use only
- Please use a regulated power supply voltage DC12V only
- No user serviceable parts inside
- Not suitable for up the coax pan tilt control
Dimensions
Application
Warning : Need to use a single core coax cable to ensure the transmission distance.
Sales +44(0)1707 330541
Enquiries sales@genieproducts.co.uk
Website www.genieproducts.co.uk
Documents / Resources
 | genie products GHD102 2 Channel AHD CVI TVI CVBS Signal Video Multiplexer [pdf] User Guide GHD102, GHD102 2 Channel AHD CVI TVI CVBS Signal Video Multiplexer, 2 Channel AHD CVI TVI CVBS Signal Video Multiplexer, AHD CVI TVI CVBS Signal Video Multiplexer, CVI TVI CVBS Signal Video Multiplexer, TVI CVBS Signal Video Multiplexer, CVBS Signal Video Multiplexer, Signal Video Multiplexer, Video Multiplexer, Multiplexer |
