ZJ-026 Inductive Sound System
Product Information
Specifications:
- Model: ZJ-026
- Dimensions: 140mm x 100mm x 70mm
- Rotation: 360 degrees
- Electricity Output: 6
Product Usage Instructions:
Mode Switching:
To switch modes on the ZJ-026, simply double click on the
device.
Electricity Output Adjustment:
The product has an electricity output setting of 6. Adjust the
output level as needed for your specific requirements.
Rotation Control:
The ZJ-026 can rotate 360 degrees in the up and down direction.
Use this feature to adjust the direction of the output as
desired.
Frequently Asked Questions (FAQ):
Q: How do I switch between modes?
A: Double click on the device to switch modes.
Q: What is the electricity output level of the product?
A: The electricity output setting is 6, which can be adjusted
based on your needs.
Q: Can the ZJ-026 rotate?
A: Yes, the ZJ-026 can rotate 360 degrees in the up and down
direction for versatile positioning.
140*10070*100
ZJ-026 360
ZJ-026
6
6
360 360
360
360
360
ZJ-026 360
ZJ-026
Double click to switch modes
6 6
6 Electricity output
360
360 360
Up and down direction can rotate 360 degrees
360
FCC Caution: This device com plies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device m ay not cause harm ful interference, and (2) this device m ust accept any interference received, including interference that m ay cause undesired operation. Any changes or m odifications not expressly approved by the party responsible for com pliance could void the user’s authority to operate the equipm ent. NOTE: This equipm ent has been tested and found to com ply with the lim its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harm ful interference in a residential installation. This equipm ent generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, m ay cause harm ful interference to radio com m unications. However, there is no guarantee that interference will not occur in a particular installation. If this equipm ent does cause harm ful interference to radio or television reception, which can be determ ined by turning the equipm ent off and on, the user is encouraged to try to correct the interference by one or m ore of the following m easures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipm ent and receiver. — Connect the equipm ent into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/ TV technician for help. The device has been evaluated to m eet general RF exposure requirem ent. The device can be used in portable exposure condition without restriction.
Documents / Resources
 | Generic ZJ-026 Inductive Sound System [pdf] User Manual ZJ-026, 2BLYA-ZJ-026, 2BLYAZJ026, ZJ-026 Inductive Sound System, ZJ-026, Inductive Sound System, Sound System, System |