Generic-LOGO

Generic EV02 Aone GPS Wired GPS Tracker

Generic-EV02-Aone-GPS-Wired-GPS-Tracker-PRODUCT

Appearance

Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (1)

Product Features

Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (2)

Wire connection

Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (3)Terminal DescriptionGeneric-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (4)

Red LED light (Power Supply Status)Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (5)

Yellow LED light (GSM Status)Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (6)

Blue LED light (GPS Status)Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (7)

Installation

Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (8)

  1. Red line connect battery positive pole(+) black line connect battery negative pole(-)
  2. The orange line connects the ACC line.
  3. Wring for Cut-off oil function:
    1. Find the ‘Speed control line’
    2. Detect the voltage of the ‘Speed control line’ by a millimeter.
    3. Cut the ‘Speed control line’ into two lines
    4. Connect “Speed control lines” with the relay’s two green lines

Note:

  1. Please use the correct relay, normally, car sut 12V relay. truck suit for 24V relay.
  2. Open the SIM card cover, insert the SIM card, and turn onthe  battery supply
  3. SIM cards must have GPRS data and SMS service.
  4. Please make sure the LED lights up and no steel matter covers the device.
  5. Please fix it by cable or tape.

InstallationGeneric-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (9)

Product Installation

Please find some who are experienced in GPS tracker installation

Installation Precautions

  1. The device should be Installed in somewhere waterproof and easily hidden.
  2. Please tum on the device battery switch before using it.
  3. Ensure the device light in the front and there is no shield before installing
  4. Secure with a cable tie or sponge double-sided tapeGeneric-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (10)

Precautions

GPS Tracker should be installed covertly, please contact the supplier for professional installation advice.

  1. Hidden installation, avoid water.
  2. Ensure the LED side facing the sky and no metal cover
  3. Use cable or 3m tape to fix the device.

Working Description

  1. After being connected to the vehicle battery, the device will be turned on automatically and the power indicator light (red) will be long bright.
  2. If the device is using its backup battery, the power indicator light (red) will slowly bink after being turned on manually.
  3. GSM signal light (yellow) and GPS signal light(blue) start fast-blinking
  4. A few seconds later both the GSM light and GPS light will be steady and start slowly blinking: the device enters into normal working status.

Troubleshooting

Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (11)

Access to Platform

  1. Platform (www.wanwaygps.com)
  2. Android and IOS APP(Scan the QR code to Download the app)Generic-EV02-Aone-GPS-Wired-GPS-Tracker-FIG- (12)

There are two methods to log in to the platform or app.

  1. Login by IMEl number(the 15 digits in the back of the device), password: the last 6 digits of IMEI number.
  2. Contact the supplier to create an account for you

Please read the installation instruction manual carefully before installation and use.

Documents / Resources

Generic EV02 Aone GPS Wired GPS Tracker [pdf] User Manual
EV02 Aone GPS Wired GPS Tracker, EV02, Aone GPS Wired GPS Tracker, GPS Wired GPS Tracker, GPS Tracker, Tracker

References

Leave a comment

Your email address will not be published. Required fields are marked *