gembird DAC-WPC-01 Digital Alarm Clock with Wireless Charging Function
Features
- Digital alarm clock with wireless charging function
- Built-in wireless charging module for easy charging of your iPhone X/XS/XR, iPhone 8, Galaxy S8/S7/S6 and other devices with wireless charging function
- Large LCD display shows time, date and temperature
- Dual alarm function allows to set 2 separate wake-up alarms
Specifications
- Input power: 5V/1.5A
- Wireless Output: 5V/1A 5W
PRODUCT OVERVIEW
- ON/OFF
- UP
- MENU
- DOWN
- Micro USB Input
- Time Display
- Temperature Display
- Wireless Charging Pad
- Reset
POWER
Press 
to power on. The LED display will show Time and Temperature
DISPLAY
Press 
to switch between different display modes (time/date/alarm1/2/3).
SET TIME
- Press until the display shows the time.
- Long press until the time is blinking. The display panel will shows 12H mode or 24H mode.
- Press
to select 12H or 24H mode and press to confirm the mode (if 12H mode is selected, then “PM/AM” will light up at the left corner of display). - Press to adjust the Hour first.
- Press to confirm the Hour and minutes will blink.
- Press to adjust the minutes.
- Press to confirm the minutes.
SET DATE
- Press until the display shows the date.
- Long press until the year is blinking.
- Press to change the year.
- Press to confirm the year and month will start blinking.
- Press to change the month.
- Press to confirm the month and day will start blinking.
- Press to change the day.
- Press to confirm the date.
SET ALARM
This alarm clock has 3 separate alarm settings, A1, A2 and A3, which can be set individually.
- Press until the display shows“–A1”,“–A2” or“–A3”.
- Long press until the alarm time is blinking.
- Press to adjust the Hour first.
- Press to confirm the Hour and minutes will blink.
- Press to adjust the minutes.
- Press to confirm the minutes.
- Press to determine the clock
- Pressuntil the display shows “–A1”,“–A2” or“–A3”. “–A1” means alarm 1is disabled. ”0NA1”means alarm 1 is enabled.
- Pressto enable or disable the selected alarm (1, 2, or 3).
When one of the alarm times is enables, the display will show the alarm icon 
in the lower left corner of display. On the set alarm time(s), the alarm buzzer will start beeping and the alarm will be blinking. Press any button to stop the sound. If no button is pressed, the sound will stop after 60 seconds.
TEMPERATURE
Press 
for 2 seconds to switch between Fahrenheit / Celsius.
POWER-SAVING
When power-saving is enabled, the clock display will automatically turn off after 30 seconds. Press any button to turn it on again. Short press to turn on/off the power-saving (“ONSd” means the power saving mode is turned on and “— Sd” means it is turned off).
DISPLAY SETTINGS
The display has 3 settings. Depending on the selected setting, the display will show either the time, the date or alternate between date and time.
Press 
button to select DP–1/DP–2/DP—3.
- DP-1: Display will alternate between time and date automatically every 4 seconds.
- DP-2: User can fix to show date or time.
- DP-3: Display shows time. Press to show date for 4 seconds.
Documents / Resources
 | gembird DAC-WPC-01 Digital Alarm Clock with Wireless Charging Function [pdf] User Manual DAC-WPC-01 Digital Alarm Clock with Wireless Charging Function, DAC-WPC-01, Digital Alarm Clock with Wireless Charging Function |
 | gembird DAC-WPC-01 Digital Alarm Clock With Wireless Charging Function [pdf] User Manual DAC-WPC-01 Digital Alarm Clock With Wireless Charging Function, DAC-WPC-01, Digital Alarm Clock With Wireless Charging Function, Clock With Wireless Charging Function, Wireless Charging Function, Charging Function, Function |
