Radar Sensor Remote Control Manual

FEATURES OF THE REMOTE CONTROL

• Remote Control Method: Send an infrared signal through a silica gel button.
• Transmission Distance: Linear transmission distance of 35 ft.

REMOTE CONTROL FUNCTION INTRODUCTION

1. “ON”: Always bright key, not bright during the day, enter automatic power reduction mode at night, with 75% brightness for 1 H, 50% brightness for 3H, and 25% brightness until dawn.
2. “OFF”: Forced shutdown button, no matter whether it is day or night, press it to turn off the light forcibly.
3. “ ” Radar sensor button, press this button, not bright during the day, enter motion sensing mode at night. People come to 100% full brightness, people leaves and enter the dim light mode.
4. “2H”: Turn on automatically at night and off during the day. Timing setting 2 hrs under light sensing mode, then enter motion sensing mode.
5. “3H”: Turn on automatically at night and off during the day. Timing setting 3 hrs under light sensing mode, then enter motion sensing mode.
6. “5H”: Turn on automatically at night and off during the day. Timing setting 5 hrs under light sensing mode, then enter motion sensing mode.
7. “6H”: Turn on automatically at night and off during the day. Timing setting 6 hrs under light sensing mode, then enter motion sensing mode.
8.  “8H”: Turn on automatically at night and off during the day. Timing setting 8 hrs under light sensing mode, then enter motion sensing mode.
9. “25%/50%/75%/100%”: Dimming button, lights with 25%, 50%, 75% or 100% brightness.

Documents / Resources

Gefolly SL-01 Radar Sensor Remote Control [pdf] User Manual SL-01, Radar Sensor Remote Control

References

• User Manual