PHP7030DT Profile 30 inch Built In Touch Control Induction Cooktop
“
Specifications
- Brand: GE Profile
- Model: PHP7030DT
- Type: Built-In Touch-Control Induction Cooktop
- Dimensions: 30 inches
- Power Rating: 240V – 7.7 KW, 208V – 6.9 KW
- Amps: 240V – 40 Amps, 208V – 40 Amps
Product Usage Instructions
Installation Information
Before installing the cooktop, ensure there is a 3-inch free
area between the bottom of the cooktop and any combustible
material. Refer to the installation instructions for specific
requirements. A minimum of 15 inches of clearance is needed from
the cooktop to adjacent overhead cabinets. The unit comes with a
48-inch flexible armored cable.
Cutout Filler Trim Kit
If your countertop cutout is larger than the specified
dimensions, up to 29-13/16 x 20-7/16, you can use a filler trim
kit. Order JXTR32B for black or JXTR32W for white to reduce the
cutout opening for installation.
Approximate Cooking Dimensions
Ensure the minimum clearances are maintained according to the
provided dimensions to guarantee proper installation and operation
of the cooktop.
Installation Above a Wall Oven
If installing above a wall oven, follow the specified minimum
distances from the countertop edge to the cooktop cutout and from
the countertop to the wall oven support platform. Maintain the
required clearances to ensure safe operation.
Product FAQ
Q: Is this cooktop compatible with smart cookware?
A: Yes, this cooktop is compatible with smart cookware. Smart
pans can easily pair with the cooktop for optimal cooking results.
Accessories for smart cookware are sold separately.
Q: Can I use a Sous Vide Probe with this cooktop?
A: Yes, you can use an optional Sous Vide Probe with this
cooktop. Order part number JXPROBE1 for this accessory.
Q: Is there an optional filler trim kit available for this
cooktop?
A: Yes, an optional filler trim kit is available to fill in any
countertop gaps. Order part number JXTR32B for this kit.
Q: What is the GE Appliances fit guarantee?
A: GE Appliances guarantees that this cooktop will fit precisely
when replacing a similar cooktop from GE Appliances or another
brand. If not, GE Appliances will pay up to $100 toward
modifications.
“` [pdfjs-viewer url=”/m/453d1153ad385f5f1fd04c978ef2dac4d7f16270215680dab1d130f316e4b7d3_optim.pdf” viewer_width=100% viewer_height=800px fullscreen=true download=true print=true]
PHP7030DT
GE ProfileTM 30″ Built-In Touch-Control Induction Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 3″ free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48″ flexible armored cable.
NOTE: 30″ induction cooktops are approved for use over select GE 27″ and GE 30″ Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2″ minimum flat countertop surface and 25″ minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered. Before installing, consult installation instructions packed with product for current dimensional data.
CUTOUT FILLER TRIM KIT: A filler trim kit is available for use if your countertop cutout is larger than the dimension shown, up to 29-13/16″ x 20-7/16″. Order JXTR32B for black or JXTR32W for white, to reduce the cutout opening for installation of this cooktop. These kits may be ordered from your GE Appliances Dealer.
APPROXIMATE COOKING DIMENSIONS
13″ MAX. depth of unprotected overhead cabinets
4-5/8″ at baffle near center of unit (except when installed above an approved wall oven) and 3-1/4″ at rear of air intake
29-3/4″
21″
Cooktop
1-3/4″ MIN. to rear wall
19-1/4″
28-1/16″
19-5/8″ to 19-3/4″
28-1/2″ to 28-5/8″
2-1/2″ MIN. Required
To insure accuracy, it is best to make a template when cutting the opening in the counter
INSTALLATION ABOVE A WALL OVEN
2-1/2″ MIN
From front edge of countertop to front edge of cooktop cutout
31-1/4″ MIN
From top surface of countertop to top surface of wall oven support
platform
30″ MIN. Clearance from countertop to unprotected overhead surface See label next to nameplate for MIN. clearance to rear wall.
2″ MIN. clearance to side wall from cut-out on the left of the unit
KW RATING 240V 7.7 208V 6.9 AMPERAGE 240V 40 Amps 208V 40 Amps
2″ MIN. Clearance from cutout to nearest vertical wall or cabinet on right side of the unit below the 15″ MIN. clearance height.
15″ MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop
NOTE: Check local codes for required breaker size.
For answers to your Monogram, GE CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
ADA
COMPLIANT
Listed by Underwriters Laboratories
Specification Revised 10/22
PHP7030DT
GE ProfileTM 30″ Built-In Touch-Control Induction Cooktop
FEATURES AND BENEFITS Maximum Responsiveness – 11 Control Levels Power Boil Precision Temperature Control Easy Clean Surface Safe Surface Most Efficient Heating Synchronized Elements Chef Connect Compatible Cooktop with Smart Timer Built-in WiFi Control Lock Fit Guarantee Model PHP7030DTBB Black on black
Melt
Warm
Wi-Fi Connect
Bluetooth Connect
Warm
Low
Induction
HOT
HOT
High
Melt
HOT
High
o F C APP PREHEATING
Precision Cooking
o F C APP PREHEATING
TAP COOKWARE SET TEMP
HR
MIN
HOT
Low
Timer Cancel Hold 3 Sec
High
High
Lock Controls Hold 3 Sec
All Off
COMPATIBLE COOKTOP WITH SMART COOKWARE Smart pans easily pair with this smart cooktop to ensure you get the perfect cooking results. Accessories sold separately.
OPTIONAL SOUS VIDE PROBE A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.
OPTIONAL FILLER TRIM KIT Fill in any counter top gaps with this filler trim kit. Order part number JXTR32B.
GUARANTEED FIT Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications.
Visit geappliances.com for more info.
Specification Revised 10/22
Documents / Resources
 | GE APPLIANCES PHP7030DT Profile 30 inch Built In Touch Control Induction Cooktop [pdf] Owner's Manual PHP7030DT Profile 30 inch Built In Touch Control Induction Cooktop, PHP7030DT, Profile 30 inch Built In Touch Control Induction Cooktop, 30 inch Built In Touch Control Induction Cooktop, Built In Touch Control Induction Cooktop, Touch Control Induction Cooktop, Control Induction Cooktop, Induction Cooktop, Cooktop |